i've successfuly flashed my 4810t to bios 1.10, 1.20 and 1.22.. but yesterday i tried to get to 1.23, it installed ok in windows and restarted... now it wont go past the "press f2 to enter"... i press f2 and nothing... after a few keypresses it starts to make a sound... oh and the leafy button works here...
is there anything i can do? or i must use the warranty?
My 4810T has the fan always on (not too loud, but on nevertheless...). I can't tell if it's because of the CPU (intel SU9400) or the GPU (intel gma 4500mhd).
Is there any option where I can control this? I'm on Ubuntu and I'm using the "CPU frequency scaling monitor" applet to throttle the CPU, but even in it's lowest frequency, the fan never shuts down.
I've previously had good experiences with HP until their past few models which have been a nightmare for a long, long list of reasons. But this post isn't about HP it's about Acer. This is my first Acer product and I've had a very positive response to the quality of their design but a very poor experience with the quality of manufacturing.
The unit I purchased is the Acer Aspire Timeline 4810T (1.4Ghz, 4gb, 14", 320GB WD) from Staples (US retailer) for the bargain price of 544.98 USD.
The most attractive aspects of the 4810T includes:
* The battery (wow!)
* The excellent, bright LED screen
* Fantastic keyboard (the fn key is to the right of ctrl, perfect!)
* Synaptics touchpad (the best)
* Super quiet fan even when playing games and doing heavy processing
* Decent speakers (dolby) with great sound through headphones
* USB ports on both sides
Some of the less attractive aspects include:
* Keyboard audio functions seem to rely upon software instead of hardware and can fail during heavy processing or if the OS hangs
* As a single piece of platic instead of separate buttons. The touchpad button only works on the edges with the center being "dead"
* No dock
* No expansion slot
* The speakers beep loudly when power is connected/disconnected if the speakers are on (annoying)
* The wireless light blinks during activity instead of just being on or off (annoying)
* The screen hugs the keyboard too closely creating key-shaped oil deposits on the screen (not uncommon but undesirable and a source for damage if something hard like a grain of sand is on the keyboard)
I have a 4810T (SU3500) and the wireless connection is giving me some issues. After a suspend or restart the wireless connection does not reconnect properly. Sometimes the icon says I'm connected but there is no data transfer. I have to disconnect/reconnect or turn off/turn on the wireless via the touch sensitive button. Once I do that the wireless connection is rock solid.
I'm using the newest Intel drivers and Bios version 1.23
I'm debating getting one but if it's due for a refresh soon I'll wait...
View 6 Replies View RelatedI only found with normal hard drives , I want the SSD option , where ?
Who is selling the timeline with the most amount of options ? (different CPU's, SSD ,...)
I have an Acer Timeline 4810T, and recently, I have been having a really weird issue with power. When I first got the laptop, I would plug in the power adapter and it would immediately start charging. Now, when I plug it in, it takes 30 seconds to a minute for the adapter to be recognized and the laptop to start charging. I'll plug it in and nothing will happen, and then after a while, the green battery off icon will appear on the screen and the charging light will come on.
Its a really weird issue, and I really hope is not going to get worse. I already had to return one of these because keys on the keyboard stopped working. I really don't want to have to send this one back.
I can't play HD movie at 1080p resolution.
View 12 Replies View RelatedI havent uninstalled any of the fluff that comes with the laptop and i was wondering if removing some of that will help...or
Do 4810t stream multimedia content better if running Windows 7? I guess i can wait till then.
Videos from Vimeo and Streetfire.net ( i work in automotive media ) are slow, stuttering or just plain unwatchable. Some of it isn't even HD content, and even when you wait to cache up and load then play it still is choppy.
Just purchased the Acer Timeline 4810T from Staples. This is is the 14.1 inches variant, thought I might post some initial impression for all who are interested.
Spec
Intel Core 2 Solo SU3500 1.4 ghz, 800 Mhz FSB, 3MB L2 Cache
4GB DDR 3 ram
320GB 5400rpm Western Digital
DVD+RW super multi
Wireless A/B/G (Atheros)
14.1 in 1368 x 768 LED (720P)
Windows Vista Home Premium 64 bits
HARDWARE
Contained the Acer Timeline, small form factor adapter/charger, 6 Cell 5800mah, 63WHR battery. manual and the usual documentation. No operating system dvd nor driver disc were included, however, the laptop did give me an option to create recovery discs.
The initial inspection of chasis was favorable, as you can see in the picture, it is thinner than a white macbook, roughly same thickness closed as the aluminum macbook. Chasis was rigid with no flex, the only part of the laptop that exhibit any kind of flex is the keyboard. Should you type hard, you can see the center of the keyboard being compressed downward. The chicklet style keyboard however, remained very usable and responsive.
Sound is loud and clear unlike tinny netbook speaker.
Mine comes with 3 USB port, 1 VGB, 1 HDMI, 1 ethernet port and 1 DVD+RW super multi. It also has a 5 in 1 memory card reader towards the front. 1 headphone output and 1 microphone input..........................
Can you add a bigger battery than the standard 6 cell battery?
View 10 Replies View RelatedI recently wiped out my Windows Vista Home Premium 64bit partition and installed Windows 7 Professional RTM 64-bit on it. I see the performance of booting up increased (using a SSD), programs opened faster (SSD), and shut down is a bit more faster also. The thing I'm concern about is the battery life. It seems to get shorter battery life.. the meter says 5 hours 31 minute on a 98% battery when windows vista says around 8 hours on that percentage. Both were idling. Is that normal that Windows 7 uses more battery or what?
View 10 Replies View RelatedI've seen the 3810t but never the 4810t... but i found the Pics here:
[url]
Does it not have SIM slot?? i cant see it in mine (4810tz-4696)
I'm experiencing super slow shut down on my Acer Timeline.. and this is with a SSD also.. it takes around 1 min to 2 min to shut down.. the blue led light for the hdd is blinking/solid
View 10 Replies View RelatedIm not sure if other owners of this laptop have this problem, but the screen display has a blue tint to it. Ive tried adjusting the color in the graphic property, but i can never seem to get it right so the colors on pictures are never accurately depicted when compared to my other laptops or monitors.
View 7 Replies View RelatedI just got an acer aspire timeline 5810tz, which came with vista, so i was in the process of reformatting it to have XP, which i've done several times on my previous laptops. When i changed the bios to IDE, which is what i read was the correct setting (perhaps this is where my problem is?), i found that i could no longer boot the computer or access setup, bios or the boot menu. When i attempt to do any of these things, the computer just sits on the logo screen.
i'm getting fairly desperate at this point, having tried a large variety of solutions, key combos, removing the battery, etc.
About half the time I boot up my laptop the bios hangs and I have to hard-reboot it to get it to work. Is there anything I can do?
View 2 Replies View RelatedI bricked my Aspire 4810 TG while downgrading the bios. Does anyone know how to get the notebook booting again?
View 10 Replies View RelatedI recently bought an Acer 4810T943G (su9400) with Vista.
As seems to be common with Acer notebooks, it had a freezing problem, so I decided to flash the BIOS.
The version it shipped with was v1.10. I went to the Acer website and downloaded v1.31, extracted it, and executed the program. The InsydeFlash software told me 'This BIOS is not for your notebook'.
I tried the other BIOS recommended by Acer - v1.30, and even the special editions 2.30 and 2.31, but all came up with the same message.
I then located v1.28 from somewhere else, and this flashed successfully, but I still get freezes, so I'd like to try 1.30 or 1.31.
One thing I have noticed is that on the InsydeFlash software, the BIOS ID of v1.28 is described as JM41, whereas those of v.130 and v1.31 are described as AA, and A_A forms part of the file name on the v1.31 download.
My daughter's Acer is 2.5 years old and it's running Windows 7. She recently rebooted it last week for a Windows Update and since then it starts up but hangs, with the hard drive light blinking slowly. I ran it in Safe Mode and it gets through CLASSPNP.SYS then hangs. According to articles this is usually a hardware problem. The only option I have with this OS is to bring up the Command Prompt. I've tried System File Checker - no go. System Repair comes back with unknown error and what looks like a bad Driver.
I was able to build a new partition (100+GB) and do a clean install of Windows 7 x64 Ultimate w/ SP1. This went through fine, though I would have to load the Acer drivers for the network card, etc. to finalize it. The point here is that this shows that the hard drive isn't the issue.
My fear is that Windows installed either some sort of driver or other update that has now caused the current OS on her laptop to be unusable. I went to do a System Restore and the only restore point it had was the Critical Update that she rebooted to on 2/13. Trying to roll back to that Restore Point didn't work.
I had installed Windows 7 and it was working fine but it blue screened and now it won't start. Fine, I decided I'd just reinstall it but if I put my flash drive in it will just stick at the Acer Empowering People splash screen and won't move for a while and then just goes to a screen about something being not connected and then it'll boot to the normal start Windows Recovery (Which doesn't work) and start Windows normally. If you try to start it normally it'll either stay on the Windows animation starting or get to login and then i'll input my password but it goes to Blue Screen.
I formatted the flash drive using this guide [url]
I've tried having USB FDD and USB HDD as the first boot option and still nothing.
Owner of an Acer Aspire 8930g.
I have successfully upgraded my CPU from a P8400(2.26) to a T9600 (2.8) so was reading through the MXM compatability thread and decided to pull my 9600m GT out just to double check which version it is, so I shut down the machine, removed the back and unscrewed the card, popped it out, comfirmed its the MXM-II type, reseated and rescrewed it back together.
Now I get a blank screen, external monitors dont work either.
I realised I forgot to remove the battery when removing the card, although machine was shut down.
I left it running for a bit with the back still off, felt the CPU and its hot as you would expect but the GPU was cold!
Let me start by saying that this forum is EXCELLENT source of information.
Now let me give a short history...
I had upgraded CPU before in Laptop (in my Acer 3680). So I decide to upgrade the CPU in my Acer 5315 as I gave my 3680 to my brother. I also have a work laptop which has a T7200 processor. My Acer 5315 has Celeron M 530 - from my research it should be ableto upgrade since it has the 965 chip. Before I buy any new CPU off of ebay I wanted to test and see if the Acer supports T7200 (Core 2 Duo) since I had the other laptop at hand I decided to try to work with that first.
So I disassembled the Acer 5315 took out the CPU (its very easy access) - disassembled my other laptop got the T7200 out and I put it in the Acer 5315, put it together and boot the system... Nothing... Thats when I realized that out of my infinite wisdom I had forgot to remove the battery in the Acer 5315...
So now I took the battery out, took the T7200 out from Acer, put it in my other laptop and guess what... the other laptop does not work either.... I put the celeron processor back in the Acer 5315 and it does not work either.....
So now I am out 2 laptops. My work laptop is under warranty so thats already being repaired... no worries there. But I think that I have fried hte motherboard and CPU in the Acer 5315. I tried to reset the CMOS but to no avail.
What are my options now? Here are my thoughts
1. Sell the laptop for parts on ebay and buy a new one - I think it will go for like 50-60 may be 100 if I leave the HDD and Memory in. New Core 2 Duo will cost atleast 600 for a decent one.
2. Get a new motherboard and CPU and fix the 5315 - I checked ebay and it seems that the mother board is like $200 - I dont think its worth it unless I can be sure that it will support Core 2 Duo processors - which over all will nd up costing me like $270 - still cheaper than new one.
--- Does any one know where I can find cheaper motherboards for laptops?
3. Not sure if this is possible - can I get a desktop/other laptop motherboard that will fit and work in my Acer 5315 frame? I dont think desktop motherboard will be possible - but what about other company laptop motherboards?? Can I find some aftermarket parts?
i turned my new travelmate 8471 into a brick by flashing it with the wrong bios (shame on me ) - now i am looking for a way to bring it to life again - any suggestions? Its really bad that it happened 3 days after i got it and i have no idea because these models are quite new to the market - acer support also didnt give feedback yet -
View 10 Replies View Relatedit's first day of 2010 and my notebook's bios ..F@$k up after updating ..i'm so sad , i have it only one week, it's brand new.
And i'm asking have anyone heard any solution about that problem for 5810T?
Modded BIOS 1.27 for Aspire TM 3810.
Version with Intel/Ati/Switchable options in Switchable Graphics menu:
ftp://ftp.ad1ced.ru/JM31.127_SLIC.zip
Extended version with additional unlocked options:
ftp://ftp.ad1ced.ru/JM31.127_SLIC_ad1ced.ZIP
Don't forget to change User Access Level to see all options
advan20092 is AWESOME!
Just to explain how awesome this modded BIOS is: It enables a new INTEL-ONLY graphics setting in the BIOS for the TG models. This disables the ATI chip entirely, basically making the Switchable Graphics TG models act like the T models, which "fixes" the bug where both graphics chips are active after a Resume from Standby.
This gives 3810TG owners the promised battery life of 8+ hours. One caveat - it disables the HDMI port. For HDMI you have to use Switchable or ATI-ONLY modes.
I got this laptop a few days ago, I currently have 7 and XP installed on it and kind of have vista...(read further down).
My 7 seemed to break today after playing around with a program called powerstrip trying to get my external monitor to show the right resolution (I've realised now the cable vga was broke, but meh) but this is not the full problem, after windows 7 failed to boot I tried to boot xp after turning it off during the windows 7 splash screen and now im stuck with a dash when I turn the laptop on (I dont know if its actully related to something I've done or not).
If I turn the laptop on a flashing dash comes on in the top right, it then stops flashing and turns into a none flashing dash further up the screen and just locks here and I cant do anything at all other than trying to restart it. When I had this problem previously (at least I think this problem) on my desktop it usualy turned out to be something usb related but I have everything unplugged (all though the bluetooth adapter light is on when it is doing this) so I realy dont know what to do...............
Laptop has not been used regularly for quite a while. The system booted up fine and loaded Windows Vista with no problem. Everything seemed to be in working order. Decided to wipe the system, load productivity applications, and give it to my grandson who is starting college. I depressed the F8 key during start up and entered the recovery routine. I selected the "restore to factory settings" option.
The system indicated it was first formatting the drive and then restoring the system. When I restarted the computer I got to the Dell Boot Screen. Displayed on the screen is the Dell logo, "Inspiron 1520 Series", progress bar, and "BIOS Revision A03". The progress bar fills from left to right and restarts the process in a perpetual loop. When I power the system off the on; the first boot cycle seems to take a lot longer for the progress to fill, but after that it loops with the progress bar filling quickly.The system no longer responds to the F8 key being depressed during start-up.
Consequently, I can not repeat the "Restore to factory settings" process. I have tried to boot the system several times with the same results. When I press F12 during and get "boot options" choosing "Internal Hard Drive" or "Onboard NIC" makes no difference. When I run the diagnostics option from the F12 screen; the system displays the heading: "Pre-boot System Assessment Build 4106" and passes all tests.
It appears to me that the recovery to factory settings routine has in some way damaged the system. It had been working fine before the procedure and hangs during boot afterward. How to get the system back into proper operating condition with the factory settings restored.
My HP Pavillion Notebook 17-e110dx has stopped working for no discernible reason. When I turn it on it says F1 system information and automatically goes to the F1 screen where it displays the sys info. It says press ESC to exit but that does nothing. In fact, no keys do anything. I tried to get to other screens when booting but it won't let me do anything. The laptop is only a few months old and I still have the basic 1-year warranty. Who should I contact to have HP repair it?
View 1 Replies View RelatedI upgraded to BIOS A15 when it came out and since then I have had a problem that I never had before. I have now downgraded to BIOS A14 and the problem is gone.
Problem description
When rebooting or shutting down Windows XP the shutdown process hanged. I think it only occurred when the computer was docked in the docking station. I have the advanced docking station with serial port, parallel port etc.
After I upgraded to A15 I noticed that the parallel port and serial port got listed the safe remove dialog box. With A14 and before they are not listed.