I have an "HP ENVY TouchSmart Sleekbook 4-1115dx" laptop that is about two weeks past warranty and the screen went blank. I currently have an old crt monitor hooked up to it and everyting works fine with the machine -- just cant see the screen. Will i need to replace the entire display or can i just replace the chord/ribbon from the display thru the hinges to the main unit?
I have all current drivers and software. It came with Windows 8 and I am trying to install 8.1. It does well until the restart. I do the restart and it gets part way through and the screen goes dark and hours later the screen is still dark. I press the power button and it says something like :Trying to recover install" and from there on nothing happens. I finally end up having to go back to windows 8.
Product: HP ENVY Sleekbook CTO 4t-1000 Model: KD1A99UA#ABA Operating System: Windows 7
When I restart my computer, my sound works for an hour or two and then suddenly shuts off. It does this with or without headphones. It works again as soon as I restart the computer, but I'd really love not to have to restart my computer every hour just to get the sound to work.
Also- downloading Windows 8 isn't an option as a lot of my work is incompatible with windows 8.
I have HP envy 15 j002er laptop. Originally I got it with Windows 8 but then I changed operation system to Windows 7 Pofessional (64-bit).I can`t install IDT high definition audio codec on it. I guess that is the reason why I don`t have and I can`t use Beats Audio interface on my laptop (only speakers are working). There are no audio drivers for Windows 7 available for download on HP website. When I`m cheking for driver updates via HP support, it proposes me only updates for Chipset, Graphics, Network, etc.And no Audio Driver..How can I solve it and install IDT high definition audio codec?
I recently bought a HP ENVY TouchSmart 15-j009wm which initially had windows 8, I installed a new O. S. Windows 8.1 64 bit and lost the driver pack for beats audio, I have been searching online for a download but cant seem to get a link to download.
I have a HP Envy dv7-7398ca that I recently put Windows 7 on. Everything works great except my speakers are really quiet now. I tried to download and install the IDT HD driver for Windows 7 and during installation I got a message saying my hardware was not supported.
My audio on the bottom right icon tray comes as a cross and it when ever I boot up. If I troubleshoot it says install the IDT audio driver and it will solve it. An yes the cross goes away but come back with the next boot of Windows
I can't set my sound default. I recently got my computer updated and a few hours later, my sound stopped working, then my videos, too. I reinstalled my computer, but when it got to the point where you set sound defult, it wouldn't work. The sections "Configure" and "Properties" worked, but "Set Default" wouldn't. I am so frustrated because I need sound and video to do a lot of things on my computer.
My product name is: Windows 8 HP Pavilion Sleekbook 15 PC
I have an HP Pavilion Sleekbook 15-b002ev with Windows 8.1. I experience the following problem. Sometimes I have audio and sometimes I don't, without a particular pattern. I may watch a video with no problem, but on the next video the sound will be off. I have tried everything. Uninstalling the IDT codec and re-installing it and un-checking the exclusive mode. The same thing happens even after installing the latest IDT Codec (6.10.6425.0). When audio is off, I'm trying to test the speakers and the message that this device is being used by another application, is appearing.
I got my son this laptop for xmas and immediately tried to upgrade to Windows 8.1 and the screen went blank. I restored the laptop after alot of effort and haven't tried updating it since....with the new Windows 8.1 update coming out April 8, and any fixes to HP drivers, does the upgrade process will now work?
My friend pulled a prank on me by changing my password on my laptop. He changed the user name to a fake email address so retreiving the password is impossible and would you believe he forgot the password. How do I do a reset? Also, this laptop has no disc capabilities. Ive been told Ill have to open up the back of the computer, remove the 'watch' battery and RAM sticks while pressing power, then replace everything. Sounds simple, but i know very little about computers, beyond basic user software.
HP Envy Touchsmart m6 Sleekbook Windows 8 password reset
Will not boot..has the error msg "Boot device not found" "please install an OS on your hard disk". Has "2" flashing lights, can only access F1 & F2 from boot menu. F9,F10 & "enter to continue setup" options take u right back to initial error msg screen.
In F2 diagnostics, ran memory test and passed but failed hard drive test on both quick & extensive. Failed id#M0FW03-6AD79M-XD7X0K-60CM03.
I just got a brand new HP Envy. However, i have not been able to maintain a wifi connection. Usually it will not connect to my wifi or will only connect for a few minutes and then say 'limited' and then not connect at all. I did the full windows updates for the computer. I updated the drivers for the wifi adapter. I updated the firmware to my router. I also uninstalled norton. None of these have worked, still will not connect or will connect and drop within a few minutes. My system information is as follows:
My wifi router information is: Netgear N150 model WPN824N Channel is set to auto Mode: up to 150 MB per Second Security: WPA2/PSK [AES]
I have two ipads, two iphones, an xbox, a windows phone, two toshiba laptops, and one hp pavillion DM3 that are able to connect and maintain wifi connection with no problem (not all connected at the some time necessarily-it is not an overloading problem). The network is running fine, i just cannot figure out what the problem is with this HP Envy.
I just got my new HP ENVY laptop. Product Name: m6-k025dx. It runs on Windows 8 64-bit. I am experiencing sudden, frequent loss of my Wifi connection. When it gets disconnected I don't even get the Connect To slider (which slides from the right side of the screen and shows the list of networks) on clicking the network button at bottom right corner of the screen. I need to restart my laptop to get connected again and after 5-7 minutes, I lose it again.
editing the Power Plan to maximum performance and unchecking "Allow the computer to turn off this device to save power" but nothing seems to work.
The network driver is Intel Centrino Wireless-N 2230. I have also updated the driver and turned off Bluetooth and ethernet
I have a HP ENVY TouchSmart m6-k025dx Sleekbook (ENERGY STAR)
From a cold state ( computer been off for a more then hour). I need to press the power button twice, Frist press the power button lights and the wireless lights and the screen activate with a glow, then black no lights and black screen press power button again and boots normally and fine No error or warnings
This does not seem to be normal and I can not remember the last time it booted from the first power button push.
Laptop is only 9 months old. I did all of the updates and then my touchscreen stopped working - that was 4 days ago. Today I did a system restore to the point before the 1st critical update (9/24/14). It still does not work. Did it corrupt my driver? And if so, what is the name of the driver? How can I restore the touch screen...
Product: EOLO6UA#ABA System: x64 Processor: AMD A10-5745M APU with Radeon (tm) HD Graphics SM BIOS Version: 2.7 Microsoft Windows 8
Called tech support about this problem 18MR14. They did not fix the problem. I cannot stay connected to wi-fi with this envy 1400 even thought my Ipad, Iphone and other computer stay connected. I also have a problem with my printer showing as offline with this computer. I have about had it with this computer. Has windows 8.1
I just received a refurbished HP ENVY TouchSmart m6-k125dx Sleekbook. I can't set a resolution higher than 1366 x 768 though according to specs the native resolution is 1920 x 1080. I updated the Intel HD graphic driver and the BIOS but that did not work. Did HP possibly reinstall a wrong display as part of the refurbish?
My computer: HP Envy Sleekbook 6 - 1153eo Windows 8 Pro
AHCI is currently disabled on my computer and I wish to enable it to get the most performance out of it. It can easily be enabled via the windows registry but to get it working i need to be sure that AHCI is currently enabled in the BIOS aswell. When I enter the BIOS there just isnt any advanced options available, only time and date and other basics. How do i find out wether or not AHCI is enabled in the BIOS? How do i get access to the advanced options in the BIOS to turn on AHCI (if it isnt already enabled that is)?
So I recently purchased this powerhouse of a machine and absolutely love it. I have one problem though and it is a really bothersome one to me because i really enjoy listening to m music and use my laptop as an audio source for my higher end audio components.
I have an envy 15t-j000 touchsmart that i purchased in late july and received in mid august with the beats audio option.
Ever since I first powered on the computer the audio would skip or fluctuate. I would notice the fluctuation when plugged into my stereo via the 3.5mm headphone jack. It would sound like the volume would lsightly fluctuate or maybe miss some of the lower end frequencies.
The more noticeable problem is the skipping. It will make a skipping noise that sounds as if the computer is bogged down with material, even when all that is being performed is playback. It sounds like frequency in the lines. This will occur at random times under various circumstances. It occurs when playing a music file as well as streaming music through spotify or pandora or playing a video on youtube. The skipping occurs in all those circumstances in both output to another source (headphones or speakers) as well as playing through the built in speakers.
Is it possible I am missing a driver? Is the sound card messed up? Is it just a problem with the computer? is there a fix that doesn't require me sending it back to hp?