HP Pavilion Dv6t 6b00 Display :: Blank White Screen - No Movement
Jan 30, 2013
My laptop pavilion dv6t 6b00 quad edition entertainment notebook pc. tripple booted with windows 8, 7 and ubuntu. was working nicely for a year and 35 days. today when I tried to start it, a blank white screen appears. no movement. does not work even with external monitor. even the start up hp logo does not come up to take me to bios. no movement. even lights don't change when I push the wifi or sound button on the keyboard. no external media. has super important data and loss can cause big problems.
I have a Compaq 3000 Laptop, it's almost 2.4 Years old now, over the period of time I dint faced any issues with my Machine.it all started yesterday.
I was watching a movie on my Laptop yesterday, after sometime the screen froze up but the movie was playing as I was able to hear whats going in the movie.
Later I tried restarting the machine, what i get is the machine boots up properly, but the screen doesnt display anything thing, it shows up a blank white screen, sometime when the windows XP loading picture comes up the screen shows light distorted colors but again goes white blank.
I did approached a local vendor for that but he says that we need to replace on the motherboard, I was not much convinced over his explanation over the issue.
I would like to know your views on what might be the problem with my Machine.
I am going to try over connecting an external monitor and see if LCD is the problem, but I would like to know more what all possible options are there which might be affecting my machine and how much would it cost me in the worst possible case.
We have two HP Pavilion dv6t-3100 CTO Select Edition Entertainment notebooks purchased at the same time. The screen on one of them has been flickering, has had to do a few recoveries, and has generated at least one BSOD.
Oddly, the problem child's Intel driver is 8.17.0010.0029, and the AMD driver is 8.741.1.1000, dated 6/22/2010.
But the problem-free laptop has Intel driver 8.17.0010.1043, and AMD driver 8.771.1.0, dated 9/8/2010.
Huh? The only difference between the two is the "bad" laptop has a i7-720QM ICU whereas the "good" laptop has the slightly more powerful i7-740QM. So why the different drivers?
When I log on my hp sleekbook 14 pavilion laptop the screen goes blank. But I can see the cursor is moving. I can hear the windows sound. I can work on safe mode. Programs running but can't see anything. OS is win 7
I have an HP PAVILION G6-1241EA and I just got a new motherboard and I installed it into my laptop. My laptop turns on but the screen is white. I looked at the wire and it is fine and I tried plugging in some other monitors vga and hdmi but nothing happens. Its been a long time since I've been on the laptop.
Blank display, connected to tv via hdmi and to monitor via vga still blank. Tried with single ram in both slots alternatively still blank. Reconnected hdd still the same. Consulted with a technician, who tells that it is possibly a IC got corrupted (maybe of the vga or graphic). Is it repairable without replacing motherboard. If so then, where do I find the IC. What is the IC model number and what else do I need to do?
Using: HP Pavilion dv6-3050tx Product number: XB772PA#ACJ
When I switch the laptop on, I can hear the fan, the wifi and caps lights come on but the display remains blank. This happened about two weeks ago so I did a hard reset and that worked. When my laptop, which is a pavilion g6-1112sa model that I've only had for two tears went into sleep mode yesterday I tried to awaken it but the screen just remained blank. I've tried a hard reset again today but it doesn't work at all.
I have a pavilion dv6, working perfectly till I closed the lid ( probably a bit too hard :/ ) and then when I opened the lid these vertical white, red and green lines are there. And a black stripe at the bottom of the display. Also horizontal grey bars covering the start button completely.
I have a HP Pavilion G7-1365dx Notebook and I recently have been having issues with the screen turning white while running Netflix or Sims 3. When the screen goes white I put it in sleep mode and then wake the comupter up again and the screen comes on like normal but if I'm running Netflix or Sims 3 its only a matter of time before it happens again.
Processor: AMD A6-3420M APU with Radeon(tm) HD Graphics 1.50GHz
Installed Memory (RAM): 4.00 GB (3.48 GB usable)
System Type: 64-bit Operating System
No Pen or Touch Input is available for this Display
My HP Pavilion dvr-1200 CTO Entertainment Notebook PC has a huge problem. It will not display anything other than a set pattern of rotating block colors -it goes from red to blue to green to a shadow sort of grey with vertical lines, each lasting about ten seconds, than repeating over and over. You can hear the computer starting up, and you can get it to the start page by knowing when to press enter and when to scan your fingerprint; this is as far as I can get without seeing. I've had the problem for about two months; the unfortunate thing is after about a week, I decided to hook up a external monitor to it, and got a full picture, with everything but the screen display working great. Unfortunately, in excited haste, I decided it had to be a graphics driver issue, which would just mean an update or a completely new set of drivers. Great. But I accidentally deleted the drivers I had before I uploaded new ones, and the external screen I was using went blank.
My tv tuner INTEX IT-TV 150 FM plays only audio. The screen turns totaly white with no video signal. When calling the supporting staff at INTEX, they told me to install HP Pavilion dv4 video driver. Could this be the solution? If so, where could I find the video driver?
My laptop shows me a blank screen after the windows bar loading screen. It did an automatic test on my hard drive to fix files, but when I restarted, it still would keep doing this test. I've tried to use a Windows Vista Upgrade/Recovery, but there is no backup and it keeps giving me an error on all types of restoration. I have just tried the Hard Disk Self Test and it says that there is an error #1 - 04 Fail. From what I've read in the forums, I will likely have to replace the hard drive, but how to recover the files from the old drive and what kind of drive I need to replace.
I got a Acer Aspire 4315 for Christmas this year....
It has been running great , on Vista, untill recently....
I have 2 problems:
1.... When switching on sometimes i get a blank white screen....? I can hear it swithing on, the fan spinning and the windows welcome noise but NO SCREEN! What is going on? This also happens at random times, sometimes i think its when it gets too hot?
2..... My Ac adapter, power suply... When left on fora long time gets very hot? I understand that this is normal... But why does it make a very annoying high pitched noise?
This is my back up laptop that I let my 13yro daughter use here @ home. It's never been taken out of the house, another words not thrown around @ airports, jostled in subways, train etc, another words taken very good care of.
I have a HP Pavilion dv6t-6c00. I upgraded to windows 7 ultimate before which I had windows 7 home premium on which I could use the webcam but now it shows an error when I open cyberlink youcam "Warning, No webcam detected. Try plugging in a webcam into your computer now. If you are using an integrated camera, make sure that it is turned on". I've watched and tried all the steps except for the last step as the cyberlink youcam software doesn't allow me to click the configure settings. What should I do to turn on my webcam?
I bought this Envy 17 3D in December of 2010 from HP Websight. The Model is WY771AV and runs Windows 7 with 1080P and Uses A M D 5875 Graphics. The Last 30 days, @ boot-up, the screen will turn solid white when I try to start it up. All I can do is hold power button down to power off and retry. 9 0 % of time, retry fails(does same thing), but occasionally I can go to startup repair , run system restore and use machine for 2 or 3 times before the next white-out.
All of the diagnostics have been run, multiple times to determine the BIOS light flash count blank screen issue, and all other suggestions run, including an additional monitor, with no success.
Hard drive, disc drive, everything works, or at the very least sounds like it is attempting to work as required on start up, just a blank screen. Final diagnostic points to the video card as the culprit? With all of the new systems available around $300, would like to know if it is the video card, and if it is worth the fix or just purchase an entirely new system?
I recently have had a problem with my Dell XPS M1530. The laptop crashed from what I presume was it overheating. When I switch it back on the screen lights up white with no display. I am able to use the laptop through an external display (pressing FN F8) however the quality is very poor, this is surprising as I used to use an external display frequently at a high quality and I am now unable to change the screen resolution in the display settings. I have also noticed that I can no longed put the laptop into 'sleep' mode. How the two errors could be related but both happened after the same crash.
I have tried to recconect the video cable but unfortunately it didn't work.
Any simple fix to this problem or if the GPU or screen needs to be replaced?
My HP Envy dv6 recently did one of its updates and after that it restarted. Now when I turn my computer on it has the Hp logo, the login and after I log in nothing. There's just a black screen with a glow and the cursor. I know it's working because I can hear noises and the fan going but I can't see my desktop. But if I use the simple pass finger identification it will take me to the we page I saved on the designated finger. That's the only way I can get to the internet. I can't use anything else because I can't see my desktop. I can do ctrl alt del and that pops up but it doesn't do any good. I did the unplug everything, take out the battery, plug in AC adapter but not the battery , hold power button for 15 seconds then put the AC adapter but not the battery and turn on thing and nothing changed. I tried multiple restarts and shutdowns and nothing changed.
I was watching a movie on Netflix, and all of the sudden the screen kept scrambling itself. I shut it down and now when I restart my laptop all I get is a white scrambled screen. I restarted it again and now I still can't do anything and it won't shut down unless I hold down the power button for a few seconds...
I have a "compaq presario v6210US" which worked great for a while then it just shut itself off and restarted and the screen stayed black. Now it keeps restarting itself but the screen stays blakc. I can hear the fan and hard drive and everything else running the way it's supposed to. I heard that this has happened to a bunch of other people so it sounds like a defect to me. How do I get it fixed or do I just pull the hard drive, toss the Presario and get a competitors laptop?
I just got a problem today on my HP Envy notebook Product number = F7P58PA. It has working fine till yesterday night. It has windows 8.1 on it, and may be some updates are installed on it during the night (I am not too sure about it).
THe issue is that when I login to windows by providing my pin the start up screen does not show up. its simply blank with cursor showing only. ALT-CTRL DEL gives the task manager and I can run internet explorer through task manager run command but start up screen remains blank.
I have done battery, memory etc tests and nothing has resolved the issue.
I have an "HP ENVY TouchSmart Sleekbook 4-1115dx" laptop that is about two weeks past warranty and the screen went blank. I currently have an old crt monitor hooked up to it and everyting works fine with the machine -- just cant see the screen. Will i need to replace the entire display or can i just replace the chord/ribbon from the display thru the hinges to the main unit?
My computer starts and runs through the welcome screen but then goes blank. The screen is backlit, and the mouse is there and I can move it, but screen is black. I shut down the computer last night and I think I closed it before it was done with its business. Opened it this am and was blank.
I have removed the battery and I think I have followed the hard reset appropriately, but I have seen 2 different instructions one in a forum and one in HP support page, so I am not positive.
This computer was purchased only a few months ago and this is pretty ridiculous, right?