I have a aspire 1690, my problem is when I start it up the screen shows what I can only describe as looking through obscure glass with letters and numbers randomly placed all over.When I start in safe mode I can just make out enough to browse desktop but in normal mode its bluescreen and dumping to memory.I know everything is working in the backround as I can browse my computer etc. Cant make enough out after pressing alt>f10 to perform a restore from disk. checked the fan is working thinking it might be overheating but this is working fine.
I am wondering the Realtek audio driver provided in the acer webpage can be used in aspire 1690 as the sound card is Conexant. Anyone can get the sound card works in windows vista. I tried but it failed.
My old Aspire 1690WLMi runs Windows 7, but can`t run Aero cause it has an integrated graphics card. Hard drive space is super tight since it`s only 80gb. Thinking of getting a new laptop around $1000, but also considering just getting a new 320gb hard drive for $100. What do you think i should do - new laptop or new hard drive.
Considering an Aspire One right now because it is less expensive than the others. I have a 512MB RAM (DDR2-PC5300) and 80GB 2.5" SATA HDD from my Thinkpad (which I upgraded both). So, I think maybe I could buy the Aspire One the cheapest version (8GB I guess).
So, is it can be done? I know that there is SATA version of the Aspire One but not sure the connector will be there in the SSD version. Try to google it but found only SSD upgrade....
I recently upgraded the ram in my 5315 with 2x1GB 5300 DDR2 sticks. Ever scince i did the upgrade i have had the Memory Management Blue screen about once every 3days. The sitcks are installed correctly and ive even tried swapping the order of the sitcks in the slots and i still have this problem. running Vista Basic 32-Bit
I recently purchased a 5517-5779 from best buy. Got a nice deal on it and i think im starting to see why...its only a 160gb HD which im kinda kicking myself for getting. To start with i was sitting at about 105gb with nothing of my own installed.
a week later im sitting at 99.6gb. i have still installed nothing. i have used many HP's and havent had this problem.. there seems to be a memory leak somewhere. Are these prominent with Acer products? I should have familiarized myself with Acer a bit more before purchasing one of their products. If i could resolve this issue i would be 100% satisfied with my newest purchase.
ETA-The pc has already had the geek squads "optimization and restoration" done.
I have an Aspire E1-571-6650 that is about 1.5 yrs old. I am getting messages that I am almost out of memory (currently 4GB of memory). Not sure what is using up the memory as I don't do any gaming or graphics. I do use the internet, facebook, MS Office, MapQuest, Google Earth, etc.
Beside why am I running out of memory? Can I add memory to this notebook? Got plenty of disk space but might want to add an additional 4GB or more of internal. Possible?
an Acer Aspire 5570z was gifted to me by my father and I own it since 1.5 Year and it works cool, the notebook came with 512MB RAM and I updated it to 512x2 a year back and every thing worked cool, but now, I finally decided to buy a 2 GB RAM, I bought a 2 GB DDR RAM and inserted in my laptop, the laptop works good but problem is that now when I go to CMOS setup, it shows up as Extended memory to 2048MB but I own Windows Vista Ultimate (French) 32BITS ; but my Windows only shows up as I have only 1.00GB of memory!
I wanted to open my box to check the ease (or not) of a memory upgrade but had a helluva sweaty time trying to get the compartment cover off.
After undoing the 4 screws and getting it open a bit, it still seemed VERY firmly held in the vicinity of the fan vent area.
The plastic cover is pretty thin and I was terrified of breaking it, so tried a little prying, a bit of heaving, some levering, tugging, jabbing, swearing, praying etc. I even had the computer overturned and was looking for a way through the keyboard where I was convinced that a bolt must be holding the memory cover down.
Anyway it DID finally come loose but it was a bit scary, so I've made a couple of scans and added some notes on the lugs which were holding it in place in the hope that it might prove useful to others in the same predicament.
One scan is of the actual lid and the other is of what's inside, in case you get to feel like pushing a screwdriver in there - (don't).
When I check in the bios, it has the video memory set at 64mb. It does not give me the option to change this value like my old aspire 5100. Does anyone know of a way to increase the video memory on this lappy?
I have a new(ish) Aspire 5580-6974 notebook: Core 2 Duo (T5300) 533 MHz 1GB RAM, etc.
I just bought a 2GB DDR2 PC2-5300 dual channel memory kit; that should be a relatively simple upgrade.
I want to eventually upgrade the CPU to the T7600, which is 677 MHz. The intel 945GM chipset should support that, but is it just a matter of dropping in the new CPU? Or are there changes to be made on the motherboard (jumpers, etc)? There doesn't seem to be any such setting options in the BIOS.
I recently got an Aspire 5315 laptop and have been slowly getting it set up to run XP instead of Vista. However, the one problem I am having at the moment is with the Intel X3100 Graphics Accelerator. I have looked all over the internet and can't seem to find any info on how I can define the memory that is allocated to the card, it's all well and good the card using dynamic memory allocation but it's not allocating enough memory. I want to have a fixed 128MB dedicated to the graphics but I can't see any way of doing this either via the Intel software or the BIOS.
I thought I ought to be able to assign a minimum memory amount via the BIOS but graphics memory is locked on my BIOS setting. Would flashing to a later BIOS fix this?
Have a new 3690-2970 with 512 memory Vista Home basic and it runs extremely slow. It has only been on the internet to do MS updates so I know it is not infected with spyware causing it to run slowly. I was thinking a memory upgrade would help.
I got DDR2 533 SO-DIMM, 200-pin memory for it 1 gig but can't for the life of me determine where the memory chip is located
I have looked in two areas on the back of the notebook and can't find it. I looked under Hardrive. and then there is another small panel with one screw but when I opened that there was just this chrome box in there.
Question 2 once I find it can I use both the 512 and 1gig together or only the one 1 gig chip?
I tried locating a tech manual on this notebook and none of the links showed manuals for this model.
My laptop is an Acer Aspire 6935G with Intel C2D P8400 2.26GHz (1066MHz FSB) and 4GB DDR3 RAM. OS is Vista Home Premium 32-bit.
Under the memory tab in CPU-Z, the DRAM Frequency shows as 399MHz. However, the maximum bandwith for the memory under the SPD tab shows as 533MHz. If I'm correct this means my RAM is running at 800MHz instead of 1066MHz.
I've read other threads mentioning this problem and a solution was a BIOS update to v1.10. My current BIOS is v1.05, which has been on my laptop since new.
I've never updated a BIOS before and therefore reluctant in case anything goes wrong. The laptop is running fine with Vista.
My Acer Aspire 5101 wasn't running very fast so after the usual anti-spyware and anti-virus programs I tried the Windows Memory Diagnostic program booting from cd.
My laptop came with two sticks of 512MB DDR2 RAM. I got fails on wmats+ so I tried each stick seperately in both slots. I got the same errors for each stick in either slot.
I don't know what to do now. My laptop is out of warranty so if I want to speak to Acer technical support there's a 50p/min helpline. I thought I'd ask for advice on this forum first to see if anyone had any other advice before I end up spending a fortune on the phone.
it is a Acer Aspire 3680, the other day the clips that holds one stick of memory in broke, does anyone know how I could fix this, was thinking of gluing the clips back on or using electrical tape to hold memory in place,
I have been looking into upgrading my Acer aspire 5610-4537 laptop every single place I looked said something different I finally decided I would trust the website www.crucial.com and there crucial system scanner tool which worked perfect and was correct even thought everyone else said it was wrong. My CPU had 2 caches for 2x512mb to make a 1gig of ram which is no where near enough for this laptop to be running windows vista or even thinking of running multiple programs. So after I ran the crucial scanner tool it told me what ram I had currently and how much I could add to my system it picked 2 GB 200pin ddr2 sodimm 256x64 pc2-5300 dual die so I ordered two of them to bring my system to 4gigs. I was a little worried because I do only have a 32bit operating system but all I had to was unplug the old chips and insert the new ones and press power and that was it no updates no changing bios or operating system so I would highly recommend using this web site.
Processor Genuine Intel(R) CPU T2250 @ 1.73GHz
Memory (RAM) 4.00 GB Graphics Mobile Intel(R) 945 Express Chipset Family Gaming graphics 256 MB Total available graphics memory Primary hard disk 21GB Free (53GB Total) Windows Vista (TM) Home Premium
I am trying to determine the maximum memory and configuration for my Apire 5745G i5. Is there somewhere I'm supposed to be able to find this information? I couldn't see it in any of the manuals. How much memory can I run total? How much per slot?
My brother just bought an Acer Aspire 3680.He purchased 1 gig of DDR2 Memory from Crucial. When we get to the desktop the screen is fine at first then the screen goes off and back on with 8 bit display. 512 DDR2 came in the machine. Crucial site said he could mix memory sizes. I tried it with the 1 gig stick by itself in case the mixed memory was the problem. Same thing..I've tried 2 sticks of 512...same thing. I've tried 2 sticks of 1 gig each..same problem. This laptop won't allow any upgrade at all. Will only run correctly with (1) 512 stick. I've never seen this problem before. I've installed many memory sticks in computers. This is a first for me. What could be causing this?? Any advice would be appreciated. BTW. the computer shows the upgrade amount of memory but the display color keeps changing to 8 Bit! I change it back to 32 and it reverts back after a few moments to 8 Bit. I went to Acer and installed an updated driver for the Intel Graphics card thinking the driver would help. I haven't installed a bios update yet. Called Acer and they said to return it for repair.