My orbicam is functioning properly but when I close my laptop lid, my computer makes a sound and when I open the lid, my computer says that new hardware was found. This "hardware" is recognized by my computer as "Acer Orbicam #2" which means for some reason, my laptop thinks that a new camera is installed or plugged in everytime I close and open my lid.
Also, it searches for a usb driver that it says the camera can connect to to go faster. But there is no actual camera, it is just recognizing my orbicam twice for some reason. This causes a problem since after awhile, when I close and open my lid, my computer goes blue screen and restarts on me.
I'm running an Acer Aspire 5672 WLMI. Recently i upgraded my RAM and hard drive, obviously having to reinstall the OS and driver's etc. Since i made the change, i haven't been able to get the Orbicam or usb ports on the left side of my computer to work.
Luckily there are still 2 ports on the right side that work fine, and the entire rest of the computer is great, but i'd like these things to work (especially the camera). I've re-installed everything 3 times at this point with no luck. The drivers are installed and in programs the camera is listed as an optional webcam. The first time i reformatted i got and error message that said camera is currently in use and cannot be accessed. It would ding on and off repeatedly until i rebooted the computer. Currently what the camera does is basically nothing. It's detected, but when pulled up in a program (such as gmail or acer software) it's simply black. I am wondering if i maybe jostled something inside and it's disconnected or if this is a software issue.
I have an Acer Aspire 5610-4179 laptop which was recently shipped back to me from the factory. I had been experiencing several problems, all of which were detailed and only some of which were fixed. I love having it back so much, though, that I am reluctant to send it away again. Some of the problems I am running into deal with the Orbicam camera and the touchpad. I have tried updating the drivers for these, but that doesn't seem to solve the problem. The camera still says that it is not plugged into a working USB port even though it's an internal camera; the touchpad works for moving the mouse, but tapping on the touchpad does not act as a mouse-click anymore. In addition, the volume and DVD control buttons on the right side of the keyboard no longer work.
My dvd/cd rom had been working fine and all of a sudden it disappeared...I tried the registy--nothing....I tried device manager--nothing...I tried BIOS---nothing!....I know that a bunch of people have had the same issue...I'm wondering if anyone has found a solution.
I wanted to upgrade my processor on my Aspire 5100 from the so so tl-50 to the RM-70. I am wondering if anyone else has tried this and if so, did you have any problems installing. from what I have researched, AMD is using the same bios for the the Turion processors and the RM-70 seems to be the one that uses the same wattage range, socket and power consumption.
I have an Acer Aspire 5100 AMD 62x dualcore tk-53 i think its at like 1.7ghz, it came with Vista, I put XP back on it, came with 1gb of ram I upgraded to 4gb hoping it would run fine. To get to the point. When I first got the computer it ran great, however now sometime with it has brought it to this annoying spike in my CPU. I've tried everything I could to keep it down, but it spikes over 100% randomly and at the worst times. I've ran Process Explorer and watched when it spiked, nothing unusual. I've watched my task manager, nothing unusual. I've defraged, ran virus scans, disabled my virus protection, uninstalled it, reinstalled it, reformated, restarted, any and everything I could. I bought a stand for the laptop and a fan so it doesnt overheat. I've check my power settings, my page file remains the same around 555 on average even during the spikes.
ive been having hard drive trouble where it says hard drive failure iminent. but I don't think that's my problem. My internet lags so bad on my aspire 5100, like when im trying to watch a streaming video it loads 3 seconds then stops, loads 3 seconds then stops. But when I plug my wifes dell laptop or my desktop into the same connection theres no lag at all. Would this have anything to do with my hard drive?
The laptop has been working fine until yesterday...the screen froze and wouldn't let me use the mousepad/curser. I turned the machine off and rebooted, it won't reboot, reacts for about 2 seconds, screen stays black and nothing. Do you think my processor is shot or thoughts to possibly fix it?
I think that it is an overheating problem considering my laptop (ONLY recently) seems to be getting very hot, to the point it needs to shut down. But this is the strange thing:
I had Windows Vista installed on this laptop (Acer Aspire 5100) earlier, and my battery almost never heated up to the point it needed to shut down, or even heat up to an extreme level.... But now that I have downgraded to Windows XP SP2, it seems to shut down MUCH more often. But I did find one thing of concern. Around the same time my laptop started shutting down, I installed an application called 'Game Speed Changer' and that whenever I had used it, it slowed my computer down immensely, and then when I went to close it, the BSOD would appear. Every time.
I purchased an Acer Aspire 5100 using it mostly for busines and writing. Now, I'd like to watch some videos, have an webcam, and play games, however, the integrated video card handles none of this well. It's slow and will sputter on something as simple as a short 60 second video clip.
I maxed out the 4GB Ram, thinking that Vista was using too much but it did not help.
Then I discovered this:
For gaming, the graphics speed is enhanced care of the ATI Radeon Xpress 1100graphics card, with 128 MB dedicated memory. The card can tap into an additional 384 MB from shared system memory, for a total of 512 MB.
I did some research and found that I could go into the BIOS and change the memory from 128 to 512. I tried it, found the setting, changed it, and thought I'd find success. However, Vista somehow read these actions as an error and a failure to start, and would not start........................
Im trying to do a factory restore using the Acer eRecovery on Aspire 5100 laptop, which I set up using their wizard, input the password, ran from Vista, it has rebooted and is showing the Windows XP logo and the moving "progress" bar thing. However, after about 3 mins, the bar stops moving and nothing else happens, its been like that for ages now. Resetting the power starts it up and gets to the same point and stops again. I have used it before without problems, the hidden partition was there before I started (I checked). Now I cant do anything with the laptop at all! Can anyone suggest what I can do now? I didn't ever get round to making DVD backup disks. The machine is also 2 years old, and I dont want to spend a fortune on Acer's 50p per min customer service, considering they should've given me a boot disk with the machine in the first place. I only wanted to restore it as for no apparent reason all my USB devices stopped being recognized by vista.
I have been having some trouble with speed on this computer and I'm quite sure its not a connection problem and its a temperature problem. Lately I have been hearing some strange noises coming out of it and I do feel a lot of heat on it's underside. Unfortunately it only has one vent on the side and the rest are at the bottom. I will admit it is not the the best well kept laptop ever, for once it's never seen a compressed air can seen I took it out it's box. I did find this tutorial online for reducing the heat but I decided to post it here first to see what you guys thought about it boefore I went on with it.
I gotta say I never opened up a laptop before but that doesn't mean I'm computer illiterate or am shy about doing it. I do realize its a tutorial for a fujitsu and not an Acer. Well the bottom line is, what can I do to reduse the temperature? Can I attempt this [url]? and if so, are there any differences I shoould be aware about?
A coworker lost her HD, a new one was added and she bought XP Pro now when I try to install it, when it gets to Setup is starting Windows it stops and stays there for ever. I have left it like that for two days and get nowhere.
I am having a problem deleting Vista on my companies laptop, when I put in my OEM XP SP3 disc I am getting an error message, there is already an updated version of windows installed with no options, do I need a partion disc to help me? what brand & model # of this disc do I need, are there any other ways to accomplish complete deletion of VISTA & install XP SP3?
my Aspire 5100 laptop has ben fully-charged but the ePower icon in the system tray says it's as low as 1% charged, and for the past several months has altogether stopped giving me the warning baloon regarding the impending need to charge or else it'll go into hibernation.
i've had this laptop for one year now.
just tonight, though, i've realized something else too-- the orange 'battery' light on the front of the laptop is blinking steadily instead of a solid green (fully charged) or solid orange (charging). then i scrutinize the ePower battery icon in the system tray and it says the laptop has 15 of battery power left, and in paretheses "plugged in, not charging". yet i can be on the laptop for hours upon hours in this state, and it never shuts down.
how to replace the keyboard? My daughter spilled spaghetti on the keyboard and some of the keys doesn't work anymore . If anybody knows how to replace it with photos and instructions I would appreciate it a lot.
my gf has aspire 5100 with vista in it, and it sucks so I decided to install xp to it. I reseached from google that does it support xp and does it work and found out that it does, you just need to make custom xp-install disc to get the HDD drivers so that xp-installation finds the HDD.
When I install xp, I get past the filecopying-part fine, then it reboots as usual and tries to start windows, but in the loading screen with xp-logo it gives me bluescreen.
0x0000007B is the error.
I've tried many installing over and over again, but with no luck. Its possible that my xp-cd is damaged in some way, but I just dont think so.
Any solution? Seems like everyone else has had no problems with installing xp to aspire 5100 vista.
I believe that istalling vista back works, but its not the right solution, since its piece of **** and slow as ****.
I was reading one of your discussions about the orbicam and I did just like the person I read about. I reformated my computer and the cam doesn't work now. When I click it on I get this message-a problem cause the program to stop working correctly. Windows will close the program and notify you if a solution is available. I have not got any response from windows.
My touchpad and keyboard quit working all of a sudden. I tried to reboot and I can't select the safe mode choice cause the arrow keys on the keyboard don't work. Some people suggested that I remove the battery and reboot, and again nothing.
I'm guessing I did this to myself somehow but I can't figure out how to fix it. It originally came with Visa but I downgraded to XP and had been using it without problems for awhile. It started getting a little slow so I recently installed (and soon after uninstalled) a bunch of optimizing / driver updating programs. After playing around with those, my laptop is running super slow... I can't watch videos, the buffer causes it to just show the image while the audio plays... After running Dr. Hardware it looks like my CPU is only running at 800mhz which is a lot slower than it used to.