i have an Acer 5920g, When i first purchased it (2 ish years ago) i would get around 1.5 hours use out of it after a full charge and on high performance. Now im gettin 45mins - half of what i used to get?
Ma lappy will be 2 years old in august, but it seems battery alredy died.
I do carry it around quite a lot, but most of the time I work on AC power.
Few weeks ago I had to work on battery and to my surprise laptop went into hibernation in less than 5 minutes after power on. Filled back to 100% and tested -- battey indicator counted percents down to 0 literally inf front of my eyes.
Is there a way to determine battery status? Might be some cells that are damaged? Any Idea what might gone wrong?
Laptop has 2 year warranty, so it's still covered for few months, but I doubt that is also true for battery only.
I bought this laptop 5 months ago and I have been monitoring it slowly deteriorating by battery life, it is a 6 cell 4400mAh battery and I use it every day, and make sure not to let it drop below 10% battery power as to not do full discharges and only partial.
I was getting 1hr 50 mins when I first got the laptop which may have been max or min settings I cant remember but anyways which seems not as good as the advertised 2.5 hr battery but I can understand that advertised and actual may differ and max, min would have had an effect. Anyways now after 5 months (Purchased early december) I am only getting 58 mins on full charge at minimum settings, now this does seem quite ridiculous and NHC is reporting 49% wear level.
My question is, is this normal for a Li-Ion Acer battery after 5 months, it seems quite bad to me, and all I can think is the laptop was left on the shelf for a while before i bought it, or that it is defective. I rang acer warranty support and I feel quite fobbed off with them saying this is normal and usage patterns and that their warranty for batteries only last 6 months and I should expect only to get 1/4 of the full charge i did when i purchased after 6 months. So acer is in the business of making low quality batteries?
My 5920G which I got for Christmas is giving me some problems.
I have gone to power options and and changed the settings so when I close the lid, nothing must happen. But when I come back in about 20 minutes after leaving the lid closed, there is no way of me getting the LCD to start up. The only way I can get past this is by pressing the power button in for a few seconds forcing it to shut down. Obviously this is bad for my notebook. How do I get this sorted out? The same thing happens if I leave the lid open and come back in a while.
I have the Acer Aspire 5920G. Since my laptop is starting to get a bit too warm, I would like to know the steps in cleaning the fan for my laptop. I already got a can of compressed air. Can someone please tell me the exact steps to clean the fan?
Acer 5920G won't charge. When I plug in the charger the light that normally comes on to indicate that it is charging does not light up and in windows the icon that indicates that it is charging does not come up either.
My PC is the Acer 5920G best buy configuration, about two years old and no components are overclocked.
I was using it when this happened, I just noticed that the light went off and then it wouldn't charge when I plugged in the charger. As far as I know all the other components work correctly though it does have poor battery life. I was downloading a large file so I had it running for about six hours straight if that makes any difference.
I've checked the charger itself and nothing came loose. The green light on the charger also lights up when I plug it in so it is probably not the outlet that is the problem plus I've tried it in multiple outlets.
I'm pretty sure its either the battery or the charger, but I would like to know for sure and get advice from anyone else who may have had this problem.
Past few days I got my 8600M GT 256MB DDR2 GPU overheated and it is broken now. Sigh!! The system was still bootable and I did even hear the login sound not until today when I just unplugged the HDD and GPU myself. When I put them back together, I won't boot as usual. It stops loading a while after I turned it on and stays freeze until I shut it off.
FYI, I removed the HDD to copy a backup of my content into another PC. While connecting to other PC, I did change some setting on the Ownership of some folder to get it accessible. As for the GPU, I just simply removed it to take a look myself and snap some photo of it, then inserted it back as before.
So, I wonder will these techies stuff I did awhile back could corrupted the bios that would make the system halted halfway.
Additional information that I would like to share is that I have decided to replace my GPU with ATi Mobility Radeon HD3650 512MB DDR2 instead of the original and did learn the method to do so. Read on some info regarding flashing the GPU, but was not sure bout it.
I tried installing Service Pack 1 and it won't boot. Microsoft has just sent me a Vista Home Premium Repair CD that will hopefully fix it. I have Recovery Discs, but then I'll lose all my data. This is the 2nd time that my 5920G has broke like this, is there a huge design flaw with this laptop?
Is Acer always like this? It was such a high end laptop for its price (8600M GT, Core 2 Duo 1.5 Ghz, 2 GB RAM, HDMI, HD-DVD, for $1099), but I can never trust this company again.
I have a 5920g computer which I adore, sadly we always hurt the ones we love, I dropped it and broke the right hinge, because of that the plastic frame of the monitor ripped 2. It still works perfectly fine, but its annoying as hell to watch my lappy like this all the time. I called acer, and found a provider who can repair it for 400 dlrs (I payed 1000 dlrs for the lap) so well, its seem outrageous to me paying 40% of the total price for a hinge replace.
Anyway, I found the hinge and the other parts on Ebay singapore, for less tan 100 dlrs. So, heres my question, does anyone know how hard is it to replace this parts, I am a mildy medium kinda handy guy, with some hardware skills. So anyone know if this is hard, is there a guide around that can show me the process, or should I just pay the 400 dlrs and get this thing done.
Ive taken the back cover off my 5920 many times and really never took a look at it until now. What i noticed is that the vents for the ram are covered by a glossy black see through tape rather than mesh, which covers all the other vents.
Ive linked a picture below: add http into brackets
Has anyone else noticed that in their laptop? or is mine the only one where they ran out of mesh and decided tape was just as good. I wanna just rip it off.
Another thing, has anyone been able to overclock their 5920?(mines got a T8100) ive been searching for days and cant find anyone who has. I always have my backcover off and have my laptop resting on a custom dual 120mm fan notebook cooler. My idle temps are from 37-42, load is just over 60. I wanna push this thing just a bit more.
My 5920g start it wont even get to the postscreen happened right after the hdd got messed up.So i changed i figured that it was just the hdd that kept it from starting but nothing happened.So i asked and some told me it could be anything im really hopping its that its just the gcard since its the 8600m gt.One person told me to put a cd in the drive and if its spins it its probably the card and not the motherboard or cpu but idk.So best case if its the 8600m gt, could i upgrade it to the 9600m gt or the 9650m gt since they also are mxm2.
I think the bios support the 9600m gt but im not sure about the 9650m gt.
I really wana finish my fallout 3 game i was almost at the end.
I got these temperatures by running orthos to stress the cpu, and furmark to stress the gpu at the same time. Are these temperatures normal for an Acer Aspire 5920g? Cause I find these temperatures rather high, and I'm wondering if these are safe. I already have applied some artic silver 5 thermal compound to the both the gpu and the cpu.
I thought I hibernated or maybe something triggered it back on... i don't know! But my laptop has been sitting inside a drawer while it was running! And I don't remember when the last time I used my laptop and stuck it in there! I opened it up and I saw was BSOD!
So I just turned it off and turned it back on. Nothing posts on the screen and the hard drive light will blink for a second and then stop. Sometimes the fan will just turn off and it will constantly reboot itself. When that happens it only stays on for a few seconds but nothing shows up on the montior.
Man I think I screwed it up. I opened it up and I don't see any physical damage. I even took the heat sinks off and the chips look normal. I don't know what to do now. I have already tried running without a hard drive, only 1 ram stick in either slot. Nothing.
currently i have 2gb of RAM, and i want 4GB (if possible) as i find when ever i play games, its really starting to struggle
so really the help i need is,
what RAM do i get?
is it actually possible to have 4gb of RAM in this comp recognised?
i will note that i will probably get some expert tech ppl to fit any upgrade cos i dont want to risk breaking my laptop - but i know that if i go in there they will sell me what ever they have - and it will cost me alot more than if i buy on the net first.
I my Acer 5920G, internal hard drive is dead by bad sectors. I can't boot image from my Transcend external hard drive. Just nothing happens, just blink of short line in left up corner of screen. I did everything fine in BIOS and I also tried Alt+F10 and also nothing. Is there any chance to do something before I by new internal hard.
the 8600M GT is getting a bit dated now and I'd like to upgrade it to something friendlier if possible. where would I look for an MXM II GPU that would work with the current cooling solution that the 5920G has? I know the same thermal specs are necessary cause it can't do better...and with just the 8600M GT, playing COD4 multiplayer gets it so hot I have to stop cause the keyboard is too hot to touch!
I've got 2x2GB SODIMM"s to drop in to it...easy access to a the new Penryn series CPU's...just want a better GPU. something NOT DDR2.
I recentely purchased a 9500M GS for my Acer 5920G to upgrade from my 8600M GS. Now I have read the sticky regarding what cards can go in the 5920G and the 9500M GS is listed as one of them. The problem I am having though is that when I plug the card in and boot my machine, I get no display.
Now, this is what I have tried. I have tried to get a backup of the BIOS on the 9500M GS so i can use Nibitor to identify what it is. I followed the VGA flashing guide to where it says about restoring the BIOS blind but my laptop doesnt seem to boot at all i.e. setting the first drive to USB Key does nothing as the light doesn't blink.
I have tried putting my system BIOS back from the latest version (3813) to previous ones (3811, 3805) and even the default one my laptop came with (3708). Again this was to no avail. My 9500M GS still wont boot.
So this leaves me to this conclusion. The cards BIOS must be from a different vendor, and I imagine it would be ASUS. Is there any possible way I could get this card working in my system.
I just acquired an Acer Aspire 5920G with NVidia GeForce 8600M GS.
I opened the back cover to see what it looks like and it looks like the graphics card is replaceable. Itís an MXM-II card in 73 mm x 78 mm dimensions.
Iím planning to replace the graphics card and I have couple questions.
Does the motherboard or the system support Nvidia Geforce 9600M GT 512MB GDDR3 MXM Ė II or Nvidia Quadro FX3600 512 MB MXM II?
How do you upgrade the CPU? I unbolted all the bolts on the heat sink but the frame is in the way and I canít slide the heat sink assembly out as simple as I thought it would be. Does the mainboard support X9000 extreme CPU?
Is there a link to a manual where it shows how to break apart the laptop? I might change the screen, etc.
Is it worth putting the 5920G on steroids with X9000 cpu and Nvidia Geforce 9600M GT 512MB GDDR3 or Nvidia Quadro FX3600?