You know how with Win98 there was a floppy to startup the computer to reinstall the win98 disc.... My new laptop did not come with a start up disc... how is this done? I have no original disc... can this be ordered thru Acer or do I have to purchase a disc from Microsoft?
View 8 Repliesi want to uninstall everything that is i want to ununistall the OS VISTA thus replacing it with WINDOWS XP.
But unfornately i have failed to install OS (XP) on my laptop which came with pre-installed Windows Vista. I not been able , but when i boot my lapto using Windows XP CD it copies the required files but when i press ENTER to install Windows XP the message appears that " Setup did not find any hard disk drives installed in your computer. Make sure any hard disk drives are powered on and properly connected to your computer and that any disk related hardware configuration is correct. This may involve running a manufacture supplied diagnostic or setup program. Setup cannot continue. To quit setup, press F3." Please note I have C: drive installed windows vista on it, i have drive D: files are available for recovery disk pre-installed by the windows vista or manufacturer. My lapto is ACER MODEL 4320. Please advise how to install how to install the operating system on this computer.
I have acer aspire 6930g lapotop came with preinstalled windows vista ..my problem is this preinstalled windows vista now has to much troubles and I want to reinstall to get red of all these troubles and I heard that I can reinstall it using ((factory default)) DVDs which I made by acer eRecovery program when I bought this laptop but I must tell you that when I bought this laptop ,its hard disk came with only 3 partitions so I used its windows vista tools to create 2 new partitions and now I has 5 partitions so If I used ((factory default )) DVDs to reinstall windows vista ,AM I going to loose new 2 partitons I created and all data in them?
View 6 Replies View RelatedBackground:
A few days ago i bought an Acer 7730 laptop with Windows Vista pre-installed and no disks. After initial hesitation i have decided to keep vista and not downgrade to XP. After all there will be more service packs and tweaking should speed it up lots anyway.
However, i really want to get rid of the three partitions on the hard drive. There is only one physical hard drive but there are three partitions; a hidden 10GB one (EISA configuration) which from what i have gathered is now obsolete, a C: partition 111.44GB and a D: partition 111.44GB. There is no need to split a drive into several partitions now that we have the NTFS file system (unless you are using multiple operating systems of course - but i am not) so this is really annoying me.
I have made the 2 recovery DVD and the 1 applications/drivers DVD. I have an old WinXP disk that i can use to format the laptop if required.
Question:
Using the recovery disks (which i'm assuming contain a copy of my bought OEM Vista that was pre-installed on the laptop), can i delete the partitions, format the hard drive and install Vista onto a single c: partition?
I've done this exact process before with WinXP hundreds of times but i'm not sure whether i can do the same for Vista with just the 3 DVD mentioned...
At bootup I will get a black screen after the windows loading bar (at the bottom). It will stay a black screen as long as I reboot. I need to press the power button pressed down until it reboots then I do a Regular Windows Start. I've done the safe start so it can look for disk errors too. But I still get this black screen about 60% of every boot times.
What is the problem? Vista? or other?
A work mate of mine wants me to add XP to his Aspire before he goes overseas for work purposes.
Will i need to slipstream SATA drivers for this model? I have an XP sp3 disc.
Windows XP/Vista Reinstall Guide for Dell 17" Laptops
Specifically made for the XPS M1710
Also works for the Inspiron 9400/E1705, 1720, XPS M1730, Precision M90 and M6300, see *NOTE* below
Guide Version 1.20 (Last Updated: 5-20-2008)
I've gotten probably about 15-20 requests on a guide with the drivers I personally use for my XPS M1710 for reinstalling Windows, since I have both an XP-dedicated M1710 and a Vista-dedicated M1710. So... I finally got around to posting it for everyone to see, and it includes some things that some people don't know about... It was originally going to be just what drivers to use, but instead, I morphed it into a full reinstall guide, as there are some things in here alot of people don't know about.
I'm splitting this guide into two parts. The first being for Windows XP, and the second being for Windows Vista. Both are similar in ways, but its better to do it in 2 different sections, to avoid any confusion. I'm not posting a guide for Windows x64, as I unfortunately do not have a copy of it in either XP or Vista form, and most people on the forums don't use it, so this guide is sticking to the 32-Bit versions of the respective OSes.
*NOTE*Inspiron 9400/E1705 - Exchange the Gigabit Ethernet drivers outlined below for the Broadcom 10/100 drivers on the Dell Downloads site for the Inspiron 9400/E1705.
Inspiron 1720 - Exchange the Gigabit Ethernet drivers outlined below for the Broadcom 10/100 drivers on the Dell Downloads site for the Inspiron 1720. Also, exchange the Modem drivers for the one specifically for your laptop. If you have a Webcam, add that software in as the last "driver" installed before moving to the next step.
XPS M1730 - Exchange the Modem drivers for those specifically for the XPS M1730. If you have a Webcam, add that software, along with the "Logitech GamePanel" software, in as the last "driver" installed before moving to the next step.
Precision M90 - Procedure should be the same as that for the XPS M1710, including all drivers.
Precision M6300 - Exchange the Modem drivers for those specifically for the Precision M6300, and also add in the fingerprint reader software (if wanted/needed) as the last "driver" installed before moving to the next step
For the newer (Inspiron 1720, XPS M1730, Precision M6300) model laptops, you MUST DISABLE AHCI (change the setting from AHCI --> ATA) in the BIOS in order to proceed with installation of the Operating System without issues, otherwise the installation WILL FAIL......................
I am trying to fix my dads notebook, its been running very slow lately and I want to format and reinstall Vista for him, however has most of you may know, it's really hard to find notebook drivers (well in my case it is), so does anyone know where I can find drivers for me dads 5634WLMi?
I have tryed Acer's website but they are either for 5630 or 5680/90, or can I use the 5630 drivers on this?
I would like to install Windows XP on the second hard drive of my 6930G.
And I was wondering I could use a XP OEM disc that I got from HP about 5 years ago for an NC 8000 notebook? Also do all those OEM XP discs on eBay work with any compuer? Or do I need a speciific brand of computer?
I have just installed Windows 7 RC, and all the drivers work like a charm!
But I can't use the audio-touch panel, and that's a bit sad ! The other mediabuttons work just fine.
I fixed a friends Acer computer the other day, and he had the same problem, and I found out it was because he had deactivated the Empowering Technology programs. I have installed them, but everytime I try to open it, it says: Sorry! The OS is not supported!". I have tried to run the program in compatibilty mode;(
Just got the laptop today. Went to Windows Updates out of the box and boom, it shuts down. A LOT. I managed to get the 64 bit updates in but it keeps shutting down for the rest. System Restore doesn't seem to manner.
The bottom of the laptop is hot to the touch after 2 hours worth of idle usage spent on updating windows....
Specs
Intel Core 2 Duo Processor T6400
4GB (2/2) DDR2 667 SDRAM
320GB hard drive
Blu-ray Disc Drive
9600
NVIDIA GeForce 9600M GS
The only changes I've made is removing some annoying bloatware, but I didn't expect problems this fast and this early.
I hope this is not a heating issue because I would hesitate to get a replacement. 6930 owners...have you had this problem before. Does it get hot a lot? I hope it doesn't explode if I try to play Left 4 Dead on it.
I have purchased a Acer 6930. It had Vista installed and the 5.1 Surround was working perfectly fine. I recently Installed Windows 7 and i'm unable to get the 5.1 speaker configuration setup.
When i configure the speakers, it shows me only Stereo setting. how to enable 5.1 speakers in Windows 7.
My wife has an HP DV6000 with Vista on it from the factory. We have talked about reinstalling Vista to get rid of all the other "junk" to put it nicely. I mentioned this to my brother-in-law and he said we don't want to reinstall Vista because HP puts so much on there to help users. If we reinstall Vista are we going to loose out on something HP gave us?
View 5 Replies View RelatedI have this acer aspire 5100 laptop, it came from factory with Windows Xp media center.
Later, i've updated to vista, but now i would like to go back to Xp...
I've heard about this OEM partition that keeps the originalsl files, i was wondering if i could reinstal the original OS from this OEM thing, since i don't have any backup, or recovery cd provided by acer...
I have an aspire v3-571g that came pre installed with win 8. The hard drive just crashed without warning, and I somehow lost my recovery media. When I buy a new hard drive, do I need to buy a new copy of windows, or is there another way to get my copy back.?
Also, without access to my computer, is there any good way to figure out which d4ives are compatible with my system?
Today I will get my XPS M1730 (warranty replacement for my Gen2). I'll get it with Vista Home Premium 32bit and I have a few questions.
1. Is the installation by dell "bloated" with unnecessary stuff?
2. If it is, I plan to reinstall Vista with a retail Ultimate DVD my friend has bought. Can I use the serial on the backside of my computer for this installation to get a clean Home Premium installation?
3. Will I need to activate afterwards, like call MS or something...........
After reinstalling Windows on my mother's 3000 WLMi, everything works as expected, except there is no sound. I have tried installing drivers off the Acer website, and checking all the sound controls, but to no avail.
View 4 Replies View RelatedI just got a 1730 and if i use the operating system disk that came with it it locks up on the part of the install that says "completing installation" and If I try using a copy of vista ultimate that I have it will install and the first time i reboot the computer I get a quick flash of a BSOD then it restarts and keeps doing it.
View 14 Replies View RelatedCan I use the reinstall CD that came with Precision M6400 to install on other systems ? Non- M6400, and perhaps non-dell ?
Can I use the same CD to install on multiple systems ?
I have been told that Dell laptops have a hidden partition to do a factory re install of the OS.
View 3 Replies View RelatedCould someone help, when i press f8 at boot, it doesnt have the option to reinstall OS.
View 3 Replies View Relatedhow to i reinstall vista to new hard drive?
View 7 Replies View RelatedI managed to create a Recovery Disc last night using the hard drive from the 6820s in an external caddy and accessed the Recovery CD creator that way.
But now I'm having a problem trying to reinstall Windows Vista as when I accessed the section concerning the complete format and reinstallation of Windows Vista; I got the following message:
Error 0x400 100130000 1002
If this issue continues, please contact HP Support.
how I can fix the problem that this message is referring to?
All I have just recently re-installed windows 8.1 to my Acer Aspire ES1-711-C231 laptop, the touchpad was working fine before but since the re-install it is no longer recognised/detected by windows 8.1. I have download the device driver from the support page (Elantech touchpad) but still no joy.
View 1 Replies View RelatedNeed my WiFi drivers for my Acer Aspire 5560. I no longer have the repair disc for the Aspire, but was reciveing a lot of errors and decided to use another disc to reinstall Windows 7. Once W7 was installed I was still missing my network drivers.
View 3 Replies View RelatedMy laptop is a hp dv6000 with 32 bit vista home premium preinstalled from the store. I never upgraded a laptop before so I don't know what to expect. Are all vista preinstalled systems already activated and do they use the OEM key or the product key on the bottom of the laptop? Recently my original hard drive failed and had no other choice expect to upgrade to a new one. My laptop came with the windows anytime upgrade disc so I used that to clean install vista home premium. Would the user recovery discs work instead on a new empty hard drive? When it asks for the product key the first time, I entered it in using the key on the bottom of the laptop. After everything was complete it said "3 days until automatic activation" and had the OEM key listed, not the one on the bottom of the laptop. I reactivate again using the sticker on the bottom on the laptop and it said "windows is activated", but it still had the OEM key listed. Did I enter the right key both times? Would there be any difference using the OEM key instead? Now about the recovery discs, if the "swsetup" folder was deleted before creating the discs will it still be on the disc even though it's suppose to be a factory image? Will I get the recovery partition and quick play if I reinstall again?
View 3 Replies View RelatedI have just recently re-installed windows 8.1 to my Acer Aspire ES1-711-C231 laptop, the touchpad was working fine before but since the re-install it is no longer recognised/detected by windows 8.1. I have download the device driver from the support page (Elantech touchpad) but still no joy.
View 1 Replies View RelatedMy original hard drive of Acer aspire 5738G crashed and I bought a new 1 TB WD hard drive. I tried to reinstall Windows 7 from recovery disk. All data copy and system restoration (from 3 restoration disks) completed successfully. But after the auto reboot, during “Setup is applying system settings” stage I encountered error message “Windows Setup could not configure Windows to run this computer’s hardware”. I tried reinstalling the OS multiple times but every time I am getting the same error. Before replacing my hard drive, I was using Windows 7 Home Premium OEM version and now I was trying to restore the same in my system.
View 8 Replies View RelatedI recently reinstalled windows 8.1 on my laptop as i had cloning problems with my new ssd (crucial mx100), reinstalling windows apparently solved the problem. i had problems with my display (brightness could not be adjusted) that was solved by installing intel's latest drivers using their app as device manager showed that it had the latest drivers. i only have one issue right now, the touch pad lost its multi-touch features and windows 8.1 gestures, is there anyway to fix this? i know it is probably a driver's problem but i can't really find them in device manager and if you can post the link of the drivers.
My laptop is acer V3-772G-747A8G75MAKK.
Need my WiFi drivers for my Acer Aspire 5560. I no longer have the repair disc for the Aspire, but was reciveing a lot of errors and decided to use another disc to reinstall Windows 7. Once W7 was installed I was still missing my network drivers.
View 3 Replies View Related