I had to replace the hard disk and reinstall the system from recovery CDs. Trying now to use the 3G connection results in (translated): "No 3G device recognised". I use the SIM card which functions with my pad. I tried then to repair the 3G driver then to deinstall and reinstall it but all without success. I also cannot recognise a corresponding entry in the Device-Manager. How I could get it working again?
View 9 RepliesI had to replace the hard disk and reinstall the system from recovery CDs. Trying now to use the 3G connection results in (translated): "No 3G device recognized". I use the SIM card which functions with my pad. I tried then to repair the 3G driver then to uninstall and reinstall it but all without success. I also cannot recognize a corresponding entry in the Device-Manager. How I could get it working again?
View 9 Replies View RelatedI have tried everything to get this SD card reader to work but to no avail. Even a fresh install of W7/32 ... nothing... Every time i insert an SD card in the slot... i get a message. USB device not recognized ... one of the usb devices has malfunctioned & Windows does not recognize it... I am also just using a 2 g SD card not an sdhc card.
In the Device Manager.... it shows up as "unknown device" yellow highlight... try to update the driver ... says i already have the best driver..... when i take the sd card out...unknown device disappears... i have also re-installed the drivers from here for the card reader... but nothing....
Furthermore... it seems to lead to an error code 43 ..
Acer travel mate 4060 * upgraded to 2 GB ram and windows 7 Home premiun 32 bit has just been recovered from a crash.
I am sending this message from the same computer. My built in speakers are not functioning . However when I connect an external speaker with a USB connection, its working perfectly well. I can watch videos and play music. I checked and it appears that there is no sound device installed.
I just formated my acer travelmate p253 and when I set the boot order to boot from disk and restarted I got the error sayingPXE-E61: Media test failure, check cablePXE-M0F: Exiting Brodcom PXE ROM No Bootable device -- insert boot disk and press any key. And I have tryed every thing ro get my laptop to work I removed the hdd and put it back set the bios to default inserted the win 7 disk and set the boot order, inserted a usb with win 8.1 in and set the boot order.Nothing
View 2 Replies View RelatedI just formated my acer travelmate p253 and when I set the boot order to boot from disk and restarted I got the error sayingPXE-E61: Media test failure, check cablePXE-M0F: Exiting Brodcom PXE ROMNo Bootable device -- insert boot disk and press any keyAnd I have tryed every thing ro get my laptop to work I removed the hdd and put it back set the bios to default inserted the win 7 disk and set the boot order, inserted a usb with win 8.1 in and set the boot order.Nothing...
View 2 Replies View RelatedAcer travel mate 4060 * upgraded to 2 GB ram and windows 7 Home premiun 32 bit has just been recovered from a crash.
I am sending this message from the same computer. My built in speakers are not functioning . However when I connect an external speaker with a USB connection, its working perfectly well. I can watch videos and play music. I checked and it appears that there is no sound device installed.
My G61 110 SA notebook fails to load drivers for any usb device, including Iphone 4, until i reboot. i have tried uninstalling all usb devices in the Device Manager, and allowing windows 7 SP1 to reload them, but this does not work??
View 2 Replies View Relatedrecently I bought MS Industrial wifi mice. When I plug adapter to usb port on my Inspiron 5520 it says "Device not recognized" . Then I put it to another port ( I have 4) it says the same message. I plugged it to first port again, and it works.
When I put laptop to sleep or when I shut it down and when I wake/turn it on my mice doesn't work . I plug adapter out, and plug in again, the same message .... "device not recognized"
I have a Dell 1545 Inspiron Computer with Vista Ultimate OS. Yesterday for the 2nd time, my mouse and printer won't work because I get the error message USB Device not recognized.
About 3 weeks ago I had the same problem and it self-corrected itself when the latest Windows Update apparently fixed it.
I know there is nothing truly wrong with the USB devices but am not sure what to do. If there is a particular driver for this as my backup DVD for this computer has lots of them listed. I am currently running a System Check but am not sure if that is going to work.
I have been using the same wireless mouse on this computer for three years. Suddenly it stopped working after a Windows update last night. Getting the following:USB Device Not Recongnized.
One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. I have uninstalled USB drivers and let windows reinstall them, no change. I did a restore back two days, then windows wouldn't start. Occasionally stops in Dell start up screen and gives 4 beeps. Undid restore, back to same problem stated above.
Since a few days now I get the message'The USB-device was not recognized: One of the USB-devices connected to this computer does not work correclty. The device has not been recognized'. It keeps popping up from my right corner below, every 5 seconds if I don't click it. When I click the message, I get a list of USB devices (ports) there are available. There's one 'Unknown device'. Maybe it has something to do with the finger scan (biometric)? This hasn't been working very good lately..Even when there's no single USB device installed (normally I have a mouse and a Targus laptop chill mat installed as USB devices), it keeps popping up. I tried deleting the USB port from the list (or uninstall it) in Device control, but it seems it keeps happening.
I suddenly got it, I did nothing specific of did not connect any strange devices (except for a projector on the external monitor exit, but that has nothing to do with USB). I also hear the sound for connecting and disconnecting USB devics randomly when I'm on my laptop.
HP Pavilion dv7 Notebook PCLE902EA#UUG
Windows 7 64 bit
adfasdfasdf
View 9 Replies View RelatedMy laptop's USB ports are no longer working. I believe that some internal circuitry got fried after I plugged in a USB powered device that had its own power supply. I don't remember exactly what I did because it was while ago. I still like to use the laptop, but without USB its uses are quite limited.
When I plug in a device, nothing happens. It is neither powered nor recognized. All USB ports are affected.
Just received my Thinkpad W520 4270 CTO with bluetooth installed. It was a DOS workstation that I installed Win 7 x64 Ultimate on and I finally got all the drivers installed but the bluetooth software says there is no BT device connected to my laptop. I checked the BIOS settings and confirmed the BT is enabled. I even disabled it, saved, then enabled it to toggle. Hitting the Fn+5 combo doesn't trigger the light or any "Found New Hardware." When the laptop first boots up the BT light flashes along with the wifi light and the HDD activity light. I haven't yet been able to load another OS, but I'm downloading Arch Linux and BackTrack 5 to test to see it's possibly an OS issue.
I realize the sticky about the "do not update the bluetooth drivers" but I'm not getting my bluetooth to work at all, not even being recognized by the OS as an "unknown device."
I have a 2 year old inspiron 15 (M5030) running win 7 and have had 2 problems that keep coming up
1) I run the dell diagnostics in the Dell Support Center for my hd and it keeps coming up "targeted read test failed" how do i fix that
2) I keep getting the message "USB Device Not recognized" message pop up constantly especially when I'm using my laptop on my lap when I don't have anything attached to a USB port. How do I get that to stop popping up...
I'm starting to wonder, why in the hell acer installed vista 32 bit, which only recognize 3 gb ram max, in my 8920 while it has 4 gb ram. Or maybe there is a way in vista 32 bit for making it recognize the whole amount of ram. How much is vista ultimate 64 bit actually? Is it worth swapping OS if there is no other way?
View 10 Replies View RelatedI went to rip a CD and it didn't work, so I did some investigating and found that the CD/DVD isn't even showing up. It has worked in the past and no changes have been made to the system.
View 8 Replies View RelatedI have an Acer 5920 laptop. for specs : [url]
I have had a long and complicated history with the product. I bought it back in March.
Then, I got a virus on the system. I did not get a restore CD with the laptop so I installed XP on the laptop (initially it came with Vista). This installation was on a separate hard drive than what came initially with the laptop. Also, my monitor got broken so I had to replace it with one from an older HP laptop of mine.
Now the product had some problems, but ran with XP fine. There were problems with my video card since the drivers I needed to install were integrated with Vista.
Now, I finally reinstalled Vista on the laptop. Everything is almost back to normal... except I have one BIG problem. My device control reads that I have a "standard vga video adapter" for my video card. This is entirely false as I have an Nvideo card.
I have tried installing drivers from Acer's website but to no avail. I have gotten the error message :"Nvidia setup program could not locate any drivers that are compatible with your current hardware"
I am new to this p2p support group. I have an aspire 5672WLMi with 2G RAM and factory configuration. I need to transfer files from my SD card with the 5 in one card reader slot. However after I insert the card I don't see it in the my computer as removable media.
How do I read the SD card? What am I doing wrong?
Do I need additional drivers or manuals for this?
Is there any one who can guide me to download my data using this SD card reader slot.
The title says it all. The SNID is not recognized by the Acer site in the registration process. I was able to use the SNID to pull up information about the device, but no registration.
View 2 Replies View RelatedI have been able to install most all of the missing drivers after my new OS install.......
The only problem I'm having is the wireless adapter is not recognized in device manager. There is a "network controller" that has no driver. I have installed the broadcom driver from acer site, but it won't work.
When I press the wireless button, it will toggle between wlan enabled, and wlan disabled, but I can't figure it out
I using an ACER Aspire 7520 Laptop.
I have desktop internal hard-drive that I use as an external hard-drive via usb/sata cable.
Recently I cloned my Internal laptop hard drive to the desktop internal hard drive that I mentioned above, but the problem is that whenever I connect the desktop hard-disk again to my laptop via usb/sata calbe the drive doesn't show up, it is detected by the BIOS and Windows Device manager but it doesn't show up along my laptop internal hard drive with an independent letter like it used to before I made the cloning.
Whatever I do it does not show the hard drive - it only shows the small C drive (in the screen part).
View 2 Replies View RelatedMy card reader stopped working. I read somewhere that it could be burnt out. Is there a way of checking this and or replacing it?
View 5 Replies View RelatedMy laptop is Acer Aspire E5-572G. Im having problems connecting a Samsung 840 EVO SSD through a 2nd disk caddy.
I mean, it cannot be recognized at all even in BIOS. I am thinking to install new BIOS system , but when searching for it , I don't find anything and I don't want to flash wrong BIOS update.
[URL]] ....
It is exactly this model , I have entered the serial number I got from Ace's system information software. Any way to recognize the 2nd disk caddy along with the SSD?
I successfully upgrade an old laptop so that it will run well and not be too costly to upgrade either? So slow at present....
Laptop is:
acer travelmate 4502WLMi running xpsp3
Was thinking that probably the only upgrades worth considering were ram and hdd.
If this is the case what size mem and spec will work?
If the hdd is worth upgrading do I go for internal or external? and what size ?
ive just re-installed vista home premium on my acer travelmate 5320 but now the led for the wireless is reversed, so when the wifi is on the led is off and vice versa does anyone have any ideas whatsoever as i am at a loss with this one.
View 4 Replies View RelatedI have just been given a TravelMate 530 2.2 cpu Lappy
Fine for all I need but I would love to upgrade the memory. I see it says it can only go up to 1 gig and that it has 256 as standard.
I see there is a slot under a cover on the back, but only 1 slot (Unless I'm not looking properly)
Can I just stick a 1 gig unit in this slot and all will be fine or is there some unusual method to upgrading the memory. Hope it's nothing like the old Dells
=i bought a new travelmate 5730 it came wth basic Linux.....so i formatted it nd installed windows XP 2......then i installed all drivers.......n stufff
actually i want that "empowering techoonology"......how to get it?
i installed everything frm the given CD......bt wen i press the button "E"
it shows error "file cannot b found"
so how to get tht "empowering technology" also want tht "e-recover,PSD,n other features of "empowering technology".......