I am new to this p2p support group. I have an aspire 5672WLMi with 2G RAM and factory configuration. I need to transfer files from my SD card with the 5 in one card reader slot. However after I insert the card I don't see it in the my computer as removable media.
How do I read the SD card? What am I doing wrong?
Do I need additional drivers or manuals for this?
Is there any one who can guide me to download my data using this SD card reader slot.
I have had a long and complicated history with the product. I bought it back in March.
Then, I got a virus on the system. I did not get a restore CD with the laptop so I installed XP on the laptop (initially it came with Vista). This installation was on a separate hard drive than what came initially with the laptop. Also, my monitor got broken so I had to replace it with one from an older HP laptop of mine.
Now the product had some problems, but ran with XP fine. There were problems with my video card since the drivers I needed to install were integrated with Vista.
Now, I finally reinstalled Vista on the laptop. Everything is almost back to normal... except I have one BIG problem. My device control reads that I have a "standard vga video adapter" for my video card. This is entirely false as I have an Nvideo card.
I have tried installing drivers from Acer's website but to no avail. I have gotten the error message :"Nvidia setup program could not locate any drivers that are compatible with your current hardware"
I have tried everything to get this SD card reader to work but to no avail. Even a fresh install of W7/32 ... nothing... Every time i insert an SD card in the slot... i get a message. USB device not recognized ... one of the usb devices has malfunctioned & Windows does not recognize it... I am also just using a 2 g SD card not an sdhc card.
In the Device Manager.... it shows up as "unknown device" yellow highlight... try to update the driver ... says i already have the best driver..... when i take the sd card out...unknown device disappears... i have also re-installed the drivers from here for the card reader... but nothing....
Furthermore... it seems to lead to an error code 43 ..
My sister believes the fan has failed (again) in her Acer 5672wlmi laptop. Last time I replaced the entire heatsink/fan unit, but I can't find them anywhere anymore. I have, however, found a fan that's supposedly compatible...
Has anyone here replaced a fan in a heatsink module without replacing the heatsink as well? From what I remember they really seem to be built quite firmly together... but if the store says this is compatible I have to assume there's some way to take them apart.
ive just bought this laptop when i got it the person i bought it from told me sometimes you need to reinstall the graphics driver for it to work alright,the screen went all messed up then back to normal,but when you scroll down the pages on the net it sort of flips over on its self and really slow went moving down the page.so i think i need to reinstall the graphics card driver,problem is how do i do this,i read on here that someone had said its on the recovery disc in the patch/vga folder ,i went to this folder vga but its empty,so any ideas how i can reinstall it,if not has anyone got the driver for this model x1400 512mb please,please,please as ive spend hours reading up and checking the acer web page with no luck,plus whats the best way to look after this model so it keeps running alright like is there any common problems which i should change or look out for
I used to use Omega drivers on mine until I upgraded to Premium x64. I have another 5672 issue (not entirely sure if I should have made a thread of it or not though).
On removing the HDD: The USB bus for the ports on the left side of the laptop rests under the HDD. When I removed the HDD the USB cable was stuck to it and, therefore, lodged out of it's motherboard connection. I can't see or find where to slide it back in. It "looks" as if it connects to the motherboard the same way the keyboard cable does.
I have an Acer Aspire 5672Wlmi and recently my battery went completely dead. I went to the Acer website to find out that they are out of stock which meant that I am out of luck. A quick search on amazon gave me some promising results and a few days ago I bought a battery that is an equivalent of the one I need.
If I try to boot the computer using the battery I get an error saying that I have the wrong battery and I should insert the correct battery and press any key. This message is shown immediately after the Acer logo flashes momentarily during the POST so I guess this restriction comes from Acer's BIOS. Right now it seems my chances of having the right battery are as high as being able to find a key that says "any" o my keyboard.
However I know that the battery is fine because it runs fine if I insert it once the latop has booted. Even if I remove the power plug after that it runs just fine. Also the fact that I am able to read the message when the latop is running only on battery is sufficient to convince me that my battery is fine and my BIOS is wrong.
My questions is, what should I do to fix this problem? I have already contacted the seller but I thought you guys might know more about how to fix this. I guess it would involve flashing the bios which is fine with me.
If it matters for the BIOS version, the laptop was bought in the UK.
I Just upgraded my 5672 to Windows Vista with a clean installation, installed all drivers from Acer's site. When I am using skype with bluetooth headset (Samsung WEP200) it crashes my computer to a blue screen does a memory dump and reboots. This happens every time after about 10-20 minutes of skype usage. Everything else seems to work fine for hours on end.
Secondly I still have an unknown device in device manager after installing all the drivers from Acers site, anyone know what device that could be? The hardware ID is "ACPISMCB000"
Hoperfully somebody can help me out, I am completely out of ideas.
I have an E1705 and am running Vista Home Premium. There are two issues and are most likely related.
1) My internal xD card reader keeps asking me to format a card even though nothing is inserted in there, and to be quite honest I can't even remember the last time I used an xD card.
I have tried uninstalling the device/driver and reinstalling using the most recent as well as even older drivers with no luck ....
I just bought a refurbished Elitebook 2530p that didn't come with a wireless card, so I bought a "Broadcom 4322AGN 802.11a/b/g/n Wireless LAN adapter (Sangria) - For use in Most of World (MOW)". This WLAN card was listed on HP's parts page for the 2530p here.
However, when I installed it and connected the antennas, the computer doesn't recognize it at all when booting up. It doesn't even acknowledge the presence of a new device.
Just tried to use my SD reader on my D4300 which I have had almost 2 years. It was upgraded from Vista Business to Win 7. The SD Card reader is not recognized at all!I I rebooted to look at the config, and it is checked off in the configuration. I have gone back through the Dell drivers area and do not find anything specific for the SD reader....
Lenovo x220 Winodws 7 64bit, up todate MyDigitalSSD Super Cache2 50mm SATA III (6G) mSATA SSD
I have installed my mSATA card as instructed and that part went fine. Like a couple of other folks the drive is not being recognized by Windows 7. I have checked the storage management in windows 7 and the drive is not there in any form. I have disabled all caching as suggested in some posts in the polices for the drive in windows 7. Again no drive being recognized.
I just bought this new computer, an inspiron 17r se 7720 and whenever i try to open the nvidia control panel it says that in the system there isn't an nvidia graphic card when actually its there.
The graphic card its an nvidia gt 650m with 2gb of dedicated ram. I tried to flash the bios to the latest update but nothing. What can i do?
I'm starting to wonder, why in the hell acer installed vista 32 bit, which only recognize 3 gb ram max, in my 8920 while it has 4 gb ram. Or maybe there is a way in vista 32 bit for making it recognize the whole amount of ram. How much is vista ultimate 64 bit actually? Is it worth swapping OS if there is no other way?
I went to rip a CD and it didn't work, so I did some investigating and found that the CD/DVD isn't even showing up. It has worked in the past and no changes have been made to the system.
I had to replace the hard disk and reinstall the system from recovery CDs. Trying now to use the 3G connection results in (translated): "No 3G device recognised". I use the SIM card which functions with my pad. I tried then to repair the 3G driver then to deinstall and reinstall it but all without success. I also cannot recognise a corresponding entry in the Device-Manager. How I could get it working again?
The title says it all. The SNID is not recognized by the Acer site in the registration process. I was able to use the SNID to pull up information about the device, but no registration.
I have been able to install most all of the missing drivers after my new OS install.......
The only problem I'm having is the wireless adapter is not recognized in device manager. There is a "network controller" that has no driver. I have installed the broadcom driver from acer site, but it won't work.
When I press the wireless button, it will toggle between wlan enabled, and wlan disabled, but I can't figure it out
I have desktop internal hard-drive that I use as an external hard-drive via usb/sata cable.
Recently I cloned my Internal laptop hard drive to the desktop internal hard drive that I mentioned above, but the problem is that whenever I connect the desktop hard-disk again to my laptop via usb/sata calbe the drive doesn't show up, it is detected by the BIOS and Windows Device manager but it doesn't show up along my laptop internal hard drive with an independent letter like it used to before I made the cloning.
My laptop is Acer Aspire E5-572G. Im having problems connecting a Samsung 840 EVO SSD through a 2nd disk caddy.
I mean, it cannot be recognized at all even in BIOS. I am thinking to install new BIOS system , but when searching for it , I don't find anything and I don't want to flash wrong BIOS update.
[URL]] ....
It is exactly this model , I have entered the serial number I got from Ace's system information software. Any way to recognize the 2nd disk caddy along with the SSD?
I bought a new 8935G and found that the card reader cannot read my 2GB H-Type xD card. FDXGDFSGDFS The camera I'm using it in does not show any problem. GDFSGDFSG I tried reinstalling reader driver. GDSFGSF I teste the reader with an old 16Mb xD card and this works. FSGFSG When I put the 2GB card in, Windows Vista says it has to be formatted; at this point the card is already unreadable in the camera and must be formatted againg there.
If I try to format on pc, the process stops at about 90% with an error.
I bought a new 8935G and found that the card reader cannot read my 2GB H-Type xD card. GSDFGS The camera I'm using it in does not show any problem. GDFSGS I tried reinstalling reader driver. FGFSG I teste the reader with an old 16Mb xD card and this works. SFGF When I put the 2GB card in, Windows Vista says it has to be formatted; at this point the card is already unreadable in the camera and must be formatted againg there.
If I try to format on pc, the process stops at about 90% with an error.
ok so i hv this problem with my dell xps m1330 that it wont charge the battery. and when i turn the laptop on, it gives me message that tht AC adapter can not be recognized, and that the battery may not charge.
i tried reinstalling windows but it still didnt help :S. so i called Dell technical support and talked to this guy for 40 mins, he told me a bunch of stuff , like reseting stuff in BIOS etc. but it didnt work. so at the end he just said to send the laptop for repair.
Even though i still have the manufacturing warranty, but i CANT send my laptop in for repair, bc i really NEED it for my university. And also he wont agree to send me a replacement laptop or anything.
so i really dont know what to do. i know there are alot of experts here, who are way better than dell technical support team. so does any one has an easy way out for this problem
just did a fresh installation of Windows XP and all the drivers, but under the device manager, the ICH8 USB controller is not recognized, so I can't use any USB device attached to the computer.
I just recieved a PA-13.. My comp gives me an odd dos screen saying it dosent recognize the power adapter... Is there something i have to do to make it recognize..? or should it be automatically recognized..?
I have a 9400 and i was planning on putting a fx-2500 vid card in tonight... Whats wrong here..?
