How hot do MBP models get when used for graphic intensive situations? My HP reaches 88 deg C, and sometimes it powers off instantly. Any users seen situations similar to mine (more importantly, powering off)?
a lot of people that owns the white macbook complains that it gets too hot, well the area that gets hot is the gpu and the cpu heatsink.
well i decided to open that baby up and change the thermal compound. from just using it for the past hour it seems to still heat up but at a slower rate and the final temp is noticeablly lower, not to mention that it haven't gone through the break-in phase.
unfortunatly i didn't take any pictures and a lot of people have done this so if you really want to, you can search of it online. but i didn't find some information that can help you make the process easier.
taking off the keyboard cover is pretty easy. after removing the screws make sure you keep track of them, this is the hardest part. the right side does not come out that easier, don't be afraid to bend it a little bit. the trick is try to remove the keyboard ribbon right now if you can't get it completely off, then you don't have to worry about using a bit more force, there's really nothing to keep you back...............
i would just like to know how hot the 15 inch macbook pro unibody runs after being under load for a few hours. I will be playing games 3-4 hours straight some nights.
i heard it runs at 70 degrees celsius under load and it stays around there, but if its running that hot:
Is it uncomfortable to use on your lap? will you want to take it off your lap after a few seconds?
Any tips on keeping it cool? i dont understand how a notebook cooler helps that much, as there are no intakes on the bottom of the notebook. And because of that how does keeping the macbook on your bed affect its temps at all? as long as you keep the vents sucking air in and blowing air out clear shouldnt it not matter?
I'm using (handbrake) software for conversions to iphone and the heat builds up and even with smc fan control set at 6000 rpms it hits 82 degrees and tops out, is there a notebook cooler for my unibody macbook pro 17", I could get to keep it cooler ?
should I worry about thermal paste drying up on this cpu inside this notebook ?
I've had my MBP unibody 17 for almost a year now... it's been heating up for the past couple months (or longer?). I really haven't thought to talk about it until now.
Basically, my fans start to kick it quite often after just regular web browsing. It happens quite often if I start streaming a video or watching youtube. I don't have many apps open either. My laptop is in a cool place on hard surface that doesn't absorb heat easy either. I almost want to by a fan to put under it.
I installed SMC fan control and "fan control" since the beginning. I currently have fan control only.
Is there anything specific I can check that causes the laptop to heat up or if I messed with any "internal" settings by accident to cause it to heat up?
I almost want to think I to think it's something I downloaded or something I screwed up. My brother has the exact same computer and it runs around or under 50 all the time while running more programs than I do at times.
I'm just browsing right now with adium and and chrome running and it's running at 62 degrees.
I was wondering if there are any ways to lower system temperature on MBP? My machine gets hot (particular the left side) even though I am just doing simple tasks like surfing and word processing.
I'm playing a lot of movies online from netflex and others and I keep playing with the fan speeds and was wondering what's the safe temp to stay at I'd like to get a notebook cooler but I'm using one of those notebook rolling tables so theirs no room for one unless they have some kind of fans I could hook on top and have them cool the keyboard down,
I think pushing this to a max i'm going to dry out the heat sink paste in a few months or less, any thoughts on this !
do they sell USB fans for the top of the screen that I could point down to the keyboard?
I am considering purchasing a 256g SSD for my late 2008 MBP. Of course the speed increase is a given, however I have read in numerous reports that SSDs significantly reduce heat.
If I were to replace the HDD with an SSD will heat issues disappear completely or will the MBP still be too hot for a lap due to heat generated by the video card?
To start I should remind everyone that i'm not a mac user. I have never owned a mac or used OSX properly before today. As such, my opinions should be taken as coming from someone who has much knowledge and experience as far as PC's are concerned, but who is a total mac n00b.
First Impressions
When I first walked over to the Macbooks I was quite taken aback. The build quality is out of this world. In fact, I immediately walked over to the latest PC laptops to compare and immediately thought "manufacturing FAIL". Really, the Macbooks are italian sports cars, and PC's are 30 year old farm tractors to use the typical "car analogy".
The Macbook
I really only had any interest in the Macbook when I first went to the Apple stand, but came away with the intention of buying a MacBook Pro. Let me explain:
The MacBook's build quality is awesome. It's solid, no creaking plastic or flexable build, completely and utterly solid. Awesome.............
I have been speculating over this prospect giving the direction that Apple took with the starting price of the 24" iMac (upgrade everything else and downgrade the VRAM).
I mean, this is something I would like to see, but I wonder if it is a smart move on Apple's part given how much they make off the current MBP's with the so called Apple Tax.
And, if they made this move, one has to wonder if it still would be considered a Pro.
This is going to be my very first Mac. I'm really excited about it, but I don't know which one I should go for... I narrowed it down to these two models. Which one should I go for and why?
I bought a black macbook this summer and every night when I'm in bed trying to do work I can barely see which keys is which. Obviously this wouldn't be a cheap fix but is there a way or is it possible to install the new light up keys of the new macbooks onto a pre-remodel macbook?
I downloaded this updated for my unibody Macbook Pro, and I think it's pretty vital. However, it gave me this error when I tried to install it: "You cannot install Macbook, Macbook Pro software update on this volume. This update requires Mac OS X 10.5.5 or newer." Now don't tell me that I have selected the wrong partition to install the update, or that I need to update my OS to 10.5.5 because I already have 10.5.6 and I chose the Macintosh HD partition to install the update.
So I'm definitely getting a 13" Macbook or Macbook Pro. Apple has some great prices on refurbs so that's probably the route I'll be going however I'm having trouble discerning the difference between the 13" Aluminum Unibody standard macbook and the 13" Unibody Macbook Pro. From what I've read they both have the upgraded screen, they're obviously both unibody, both have the large button-less trackpad, and both have the 9400m. They even have the same dimensions and the only difference I can see between the images is a slightly different case bevel (also the firewire and sd card ports, both are useless to me).
Unfortunately, none of the Apple stores or BestBuys in the area have a non-pro unibody 13" Macbook for me to actually handle and compare. So, basically, what makes the pro version with the slower cpu and smaller hard drive at the same price point worth it?
If I make an image of my hdd from my white macbook with disk utility onto a hard drive I take out of a unibody macbook pro will it work and boot properly?
I will do this by taking the 250gb hdd out of the unibody macbook pro and putting it into a sata external usb hdd enclosure, then making an image of my current 120gb white macbook and writing the image onto the 250gb. After, I plan to put the 250gb hdd back into the macbook pro and boot it up normally as if everything from my white macbook was just copied onto the macbook pro.
I was having bad battery life (under 2 hours) And noticed my fans were not spinning up to counter the increase in heat.
I called Apple and they had me reset my PRAM. With that done the system worked fine for a day.
Currently my Unibody will not stay connected to any wireless networks. I have tried 2 of my own routers and a friends. It will not stya connected, either on AC or battery.
Next issue involves CPU hitting 95c before the fan go past 2k rpm. Try and and play wow and the system locks up when the CPU hits 98c and the fans are still at 2k. Tried reseting the PRAM again, no luck.
1.I really didn't find much info on the (now not so) new white unibody Macbooks, expect some items for sale. And please, don't tell me that just buy the aluminum model for the extra $200, my question is strictly from an engineering point of view: heat. We all know aluminum Macbooks are quite hot, right? But how does the white unibody compares to the aluminum regarding heat issues?
2.What might be the reason that the whole bottom of the white unibody contcts the table beneath it, compared to the aluminum model, which has four rubber contact points on the four corners?
3.On the other thread I read a dedicated graphics card does not really add to battery consumption. Can you confirm that?
My main usage profile is office, web and seeing (HD, if available) Youtube videos. This one is rather a 15" vs. 13" Pro question, and half hypothetic. Let's say, all things are being equal on two models, the processor none the least, the only differences are one model has the integrated Nvidia, the other the integrated Intel plus discreet Nvidia combo, which one would serve me better, regarding performance and battery life? The discreet graphics would at least turn on when playing the HD videos?
4.Running native Windows (7 or XP) still suck on Macbooks, because of the drivers?
She has a white macbook with leopard I think, and has a separate partition in which she has boot camp, she uses specialized software that can only run in windows (doesnt run in vm). She got a new macbook air but wants to keep everything intact.
Do programs like duper clone drives with all files intact, including partitions? Keep in mind that the windows side is more important, installation of this software can only be done remotely from Russia, so it's a bit of a hassle if we screw up, we have to contact IT at a specific time and get them to do it.
Would I have to take the drive of the macbook air out? Or can i just clone to an external hard drive and then move that to the mba hard drive, in target disc mode or something.
I really love the black color of MB404, but is it good? does it crack easily?(is it plastic?)
Hows screen quality?
What do you think? which one should i buy?
I really wanted to buy Alu one before i hear about slanted keys and loose battery covers(i know %99 of them don't have that, but it's hard to risk when there's no way to fix it in here), because there's no Mac center in my country and i'm SO picky.
I've been looking at basicly two models, both got almost the exact same price tag here in Norway, so I'm not sure which one to go for.
The first ones is a MacBook Pro 15" with High-resolution 1650x1080 glossy screen, featuring the top of the line Intel Core i7-620M CPU the other is a MacBook Pro 17" with even higher resolution (1920x1200) glossy screen, featuring the slightly slower Intel Core i5-540M.
I don't list the other specifications as I don't really care about them, I already got a pair of 4GB 1600MHz CL7 (2x2GB) DIM's and a Intel X25-M 80GB SSD that I'll be using anyway.
There will be lots of movies and series played on my MacBook Pro, that's why I don't really considering paying a premium for the anti-glare screen, even though I love anti-glare and tend to struggle with glossy screens I don't see the point in actually paying more for it. And when watching movies and series, in often very dark rooms the glossy screen actually have some advantages.
The hard thing to decide here is slicker and lighter, with smaller screen and lower resolution, but better CPU versus the bigger, more heavy but featuring bigger screen and Full-HD+ resolution but slower CPU.....................
Just wondering if anyone has had any heat issues with the new i7 processors in their MBP's, and whether or not it would be worth NOT opting to get the i7, and just sticking to the i5 because of heat issues?
I would ask about battery life, but being a mac I imagine it gets at least 5-6 hours whether on an i7 or an i5 anyways correct?
I am still debating different laptop brands, but leaning towards a MBP upgrade now. I can get a 15" i7 antiglare, for only $5 difference from a 17" i5 antiglare so... just wondering if there is any significant advantage with one over the other.
I'd be doing graphics/3D work, and a game here and there perhaps.
1-a 13" MacBook Pro, primary use will be Internet and e-mail and manipulating music files. Will my husband really notice a difference/benefit between the basic 2.26 and the 2.53GHZ (and is it worth about $250 more)? If he uses it for video downloading will that make a difference?
2- a 15" MacBook Pro- here I'm debating between the 2.66 and 2.8. My daughter uses it for Office apps, PhotoShop, music, Internet and e-mail. Again, would video downloading make a difference?
I owned the 13" 2.53 Ghz with a 250GB 5400rpm HD and I was wanting to know how much difference there is between that and a 15" with the dual GPU setup? Compare both under normal useage and both under alittle stress.
I am considering going to the 15" but not if it is any hotter than the 13" I owned.
I am currently returning a dell studio xps 16" as its so sooo much hassle to deal with dell and the fact that i got 3 messsed up replacements in a row. i am looking to get a macbook or macbook pro. i would prefer a macbook pro (lowest model) although the cheapest method i can find is £1163 from the higher education store. is there any other way or place that sells it for less? apple seem to charge crazy prices for a low spec. een £100 would be expensive but maybe afordable. only discounts i found for the macbook/macbook pro are 14% higher education (the one i am looking to use) and 6% EPP and school discount. iv looked at the macbook but im going to use the laptop for movies, work and internet. movies on a 13.3" arnt exactly enjoyable to watch so thats why im looking for a macbook pro.
I finally decided that i am going to take my desktop HTPC from home to grad school for movies/TV and playing demanding games.
So now I cannot decide upon which notebook to get - the base Macbook Pro 2.4 or the base Macbook Air 1.6
I am going to be mainly doing work: taking notes, photo editing, and also some light gaming (2d games and old 3d games (red orchestra, combat mission) when away from apartment) on the notebook.
So I was wondering which is a better choice for me.
The macbook pro has a faster core 2 duo cpu, but the FSB and RAM are all the same speed. Obviously the 9600mGT is 2.5x faster than the 9400M, but I am not going to need it for intensive gaming.
Also the macbook pro has a larger screen.
But the Air is so much lighter and thinner, and would be a good thing to take to libraries. And it is 200 cheaper....................
A friend of mine is debating which model. I noticed some small differences, but for 200 bucks it almost seems worth getting the pro model. It seems as if it's a higher quality build, firewire, backlit keyboard, is the screen the same? What do you guys think? Can the Macbooks without the dedicated video card run a game like Sims 3?