bought a new macbook pro 13.3in one with the basic specs, 2.26ghz, and 2gb ram. I am thinking of updating the ram to 4gb, and wanted advice to where to get one? i found many but dont know if there are anything specific for mac, and specific for this one. my computer says its 2gb 1067mhz ddr3.
I downloaded this updated for my unibody Macbook Pro, and I think it's pretty vital. However, it gave me this error when I tried to install it: "You cannot install Macbook, Macbook Pro software update on this volume. This update requires Mac OS X 10.5.5 or newer." Now don't tell me that I have selected the wrong partition to install the update, or that I need to update my OS to 10.5.5 because I already have 10.5.6 and I chose the Macintosh HD partition to install the update.
Is it possible that problems with implementing the new Core ix series processors in the 13 inch MBP be the cause of the hold up?
I know that Dell faced this problem with their XPS 13 line. There was a problem with the chassis and it could not be upgraded. So instead continuing to sell a laptop with no future, they just decided to scrap it altogether.
Is it possible that the 13 inch simply does not have enough room for the new processor + whatever type of graphics solution they want to add?
Someone over at the official Apple forums noticed that the description of the Macbook Pro 17" keys was different from the 15", then apple silently updated the wording on the 15" models too to match the description of the keys from the 17" models.
There is speculation, that since there have been some complaints about the Macbook Pro keyboard, Apple have silently updated it for the Macbook Pro 17" and for every Macbook Pro 15" manufactured since early to mid January onwards?
So I was wondering, does anyone here have a Macbook Pro 15" that was manufactured since mid January (not just store stock purchased since then), and are the keys "better" than the earlier model Macbook Pro's?
To start I should remind everyone that i'm not a mac user. I have never owned a mac or used OSX properly before today. As such, my opinions should be taken as coming from someone who has much knowledge and experience as far as PC's are concerned, but who is a total mac n00b.
When I first walked over to the Macbooks I was quite taken aback. The build quality is out of this world. In fact, I immediately walked over to the latest PC laptops to compare and immediately thought "manufacturing FAIL". Really, the Macbooks are italian sports cars, and PC's are 30 year old farm tractors to use the typical "car analogy".
I really only had any interest in the Macbook when I first went to the Apple stand, but came away with the intention of buying a MacBook Pro. Let me explain:
The MacBook's build quality is awesome. It's solid, no creaking plastic or flexable build, completely and utterly solid. Awesome.............
I bought a black macbook this summer and every night when I'm in bed trying to do work I can barely see which keys is which. Obviously this wouldn't be a cheap fix but is there a way or is it possible to install the new light up keys of the new macbooks onto a pre-remodel macbook?
So I'm definitely getting a 13" Macbook or Macbook Pro. Apple has some great prices on refurbs so that's probably the route I'll be going however I'm having trouble discerning the difference between the 13" Aluminum Unibody standard macbook and the 13" Unibody Macbook Pro. From what I've read they both have the upgraded screen, they're obviously both unibody, both have the large button-less trackpad, and both have the 9400m. They even have the same dimensions and the only difference I can see between the images is a slightly different case bevel (also the firewire and sd card ports, both are useless to me).
Unfortunately, none of the Apple stores or BestBuys in the area have a non-pro unibody 13" Macbook for me to actually handle and compare. So, basically, what makes the pro version with the slower cpu and smaller hard drive at the same price point worth it?
If I make an image of my hdd from my white macbook with disk utility onto a hard drive I take out of a unibody macbook pro will it work and boot properly?
I will do this by taking the 250gb hdd out of the unibody macbook pro and putting it into a sata external usb hdd enclosure, then making an image of my current 120gb white macbook and writing the image onto the 250gb. After, I plan to put the 250gb hdd back into the macbook pro and boot it up normally as if everything from my white macbook was just copied onto the macbook pro.
She has a white macbook with leopard I think, and has a separate partition in which she has boot camp, she uses specialized software that can only run in windows (doesnt run in vm). She got a new macbook air but wants to keep everything intact.
Do programs like duper clone drives with all files intact, including partitions? Keep in mind that the windows side is more important, installation of this software can only be done remotely from Russia, so it's a bit of a hassle if we screw up, we have to contact IT at a specific time and get them to do it.
Would I have to take the drive of the macbook air out? Or can i just clone to an external hard drive and then move that to the mba hard drive, in target disc mode or something.
I really love the black color of MB404, but is it good? does it crack easily?(is it plastic?)
Hows screen quality?
What do you think? which one should i buy?
I really wanted to buy Alu one before i hear about slanted keys and loose battery covers(i know %99 of them don't have that, but it's hard to risk when there's no way to fix it in here), because there's no Mac center in my country and i'm SO picky.
I've been looking at basicly two models, both got almost the exact same price tag here in Norway, so I'm not sure which one to go for.
The first ones is a MacBook Pro 15" with High-resolution 1650x1080 glossy screen, featuring the top of the line Intel Core i7-620M CPU the other is a MacBook Pro 17" with even higher resolution (1920x1200) glossy screen, featuring the slightly slower Intel Core i5-540M.
I don't list the other specifications as I don't really care about them, I already got a pair of 4GB 1600MHz CL7 (2x2GB) DIM's and a Intel X25-M 80GB SSD that I'll be using anyway.
There will be lots of movies and series played on my MacBook Pro, that's why I don't really considering paying a premium for the anti-glare screen, even though I love anti-glare and tend to struggle with glossy screens I don't see the point in actually paying more for it. And when watching movies and series, in often very dark rooms the glossy screen actually have some advantages.
The hard thing to decide here is slicker and lighter, with smaller screen and lower resolution, but better CPU versus the bigger, more heavy but featuring bigger screen and Full-HD+ resolution but slower CPU.....................
1-a 13" MacBook Pro, primary use will be Internet and e-mail and manipulating music files. Will my husband really notice a difference/benefit between the basic 2.26 and the 2.53GHZ (and is it worth about $250 more)? If he uses it for video downloading will that make a difference?
2- a 15" MacBook Pro- here I'm debating between the 2.66 and 2.8. My daughter uses it for Office apps, PhotoShop, music, Internet and e-mail. Again, would video downloading make a difference?
I am currently returning a dell studio xps 16" as its so sooo much hassle to deal with dell and the fact that i got 3 messsed up replacements in a row. i am looking to get a macbook or macbook pro. i would prefer a macbook pro (lowest model) although the cheapest method i can find is £1163 from the higher education store. is there any other way or place that sells it for less? apple seem to charge crazy prices for a low spec. een £100 would be expensive but maybe afordable. only discounts i found for the macbook/macbook pro are 14% higher education (the one i am looking to use) and 6% EPP and school discount. iv looked at the macbook but im going to use the laptop for movies, work and internet. movies on a 13.3" arnt exactly enjoyable to watch so thats why im looking for a macbook pro.
A friend of mine is debating which model. I noticed some small differences, but for 200 bucks it almost seems worth getting the pro model. It seems as if it's a higher quality build, firewire, backlit keyboard, is the screen the same? What do you guys think? Can the Macbooks without the dedicated video card run a game like Sims 3?
I want to buy the Macbook Pro 15 inc Unibody, there are 2 models
Model 1 Model 2 Intel Core 2 Duo 2.4GHZ 2GB Memory 250GB hard drive1 NVIDIA GeForce 9400M+ 9600M GT with 256MB
Model 2 Intel Core 2 Duo 2.66GHZ 4GB Memory 320GB hard drive GeForce 9400M + 9600M GT with 512MB
A difference of £343. My reason for Macbook Pro over any Windows laptop is simpy becuase OSX and that the laptop fits my needs, its not too big like the 17 inch and not too small like the 13 inch, also it has an express card slot 34 which I can then add a memory card reader. I will be editing/converting a lot of photos and videos and looking forward to buying Final Cut Studio 2.0................
I have a 3 year-old MBP 15" 2.4, 4gbram and I have not liked it from day one but I ran into some problems. Applecare has no idea what I should do so I am going to see what the experts say.
I downloaded and installed a firmware critical update for the fan functioning. It was for OS Tiger
Now my fans I never hear come on and the bottom near or above the battery and the top above the keyboard get hot. I would say hot because I touch it and it is amazing something does not burn. I would definitely think plastic if left there for a while it would start to bend.
I know the downloads are on apple/support but I will just damage it more. has anybody heard of this, did anybody download this update? It said what it was before it started downloaded it.
it is indeed handy to have coolbook on the menu bar and it shows that at the time when temperature went up to 80~90; the cpu was running at full speed.
at the task i was running where i underclock down to even 800mhz things were fine, but it just shot up to 2.5k ghz for no reason.
and after locking at the range of 800-1600, the temperature did indeed dropped to a more desirable temperature of 60 but still sticked to the upper limit at 1600 w/out reason.
all temperatures stated are Celsius. there weren't any cpu intensive tasks running either; once again, i turned off everything after seeing the temperature went up. since it has nothing to do with the GPU(every unibody mac user love to say this, but no, not the gpu this time.
for those who didn't know what happened prior; my macbook pro loves heat and more so reaching 80~90 w/out reason. venting is clean enough there is no visible dust gathered, it had been used with a cooler at home so it wouldn't be the entrapment from desktop material either.