I have an Inspiron 7010 which is 2 years old. In control panel devices it tells me to troubleshoot the laptop and cannot rectify problem with Broadcom virtual wireless adaptor. Secondly running the diagnostics say the Read test is not running. These are the only problems but are not affecting the efficiency of the PC. Should I ignore it?
I've had this thing for a little over a year now. Played a bunch of games on it since I got it. Mostly source, with some other lowend stuff. I had been playing Fallout 3 a lot since it came out. I guess that wasn't such a good idea. While I was playing a few days ago, the game froze up with a bunch of artifacts. After that it was pretty much fine, but would do it every so often. Now, I can't play anything rendered realtime without really bad FPS, artifacts or BSOD. I've reinstalled the driver about 4 times now but that doesn't help any. Is it safe to say the graphics card got damaged? What do I do if that's the case? I was on a budget when I bought it and couldn't afford any improved warranty. Which means my "Limited hardware warranty" ran out about 2 months ago.
Just got an Inspiron 1420 at the dell outlet for 390 bucks. Comes with T2390, 8400M GS, 2 gb ram, 120 gb hard drive, 6 cell battery. first is this a good deal? second where can a get an OEM 9 cell bettery for the 1420? everywhere I look there selling knockoff batteries.
I've searched all over for an solution to this and can't seem to find any straight answers.
I'm trying to upgrade my Inspiron 1420 to wireless-n, but I'm running into some problems. I know that the recommended card is the Intel 4965agn, but that card only uses the 40Mhz band at the 5Ghz frequency (at 2.4Ghz, it only allows 20Mhz).
My router (Linksys WRT-160N) only uses the 2.4Ghz frequency, so if I use the 4965, I would only get 130mbps. I was led to believe that the Intel WiFi Link 5300 would work at both bands on 2.4Ghz, but I just installed it, and it doesn't seem to be compatible with my computer. I get a code 10 (unable to start) error.
So my question is this: Is there a wireless-n card that is compatible with the Inspiron 1420 and that will utilize the 40Mhz band at 2.4Ghz?.
I updated the bios on my 1420 from A09 to A10. I downloaded this from Dells support site. The utility runs from within windows and looked like it was working fine. It stated it would shutdown windows then reboot. Well it never rebooted. It is briecked. It gives me two LEDs onthe front and does nothing, no hard drive, no POST beeps.. nothing.
I called Dell and guess what, I'm 18 days past my warrenty. They are not much help.
I've searched for a way to revert back to the last bios but it seems laptop makers don't keep the old version on the chip like desktops do.
I've seen some people have had luch with a USB floopy drive but this is for Mini 9's. I've tried removing the battery and hlding the power button down for 20 secs but it does not start up (didn't think it would).
Does anyone know of anyway to restore the bios? I definately don't want to replace the motherboard.
I try to stay up-to-date with new models coming out, and have noticed that Dell is releasing a 17", 16", and 15" model with the new i7 processors. My question is will there be a 13-14" model coming out soon, or is that form factor too small for the new i7 processors? I have an aging Inspiron 1420 I am looking to replace sometime between now and the holiday season, but don't want to be waiting around for something I'm never gonna see.
I removed everything - but in the process - the camera board - located behind the bezel - broke. I figured that the screen should still work - until a camera can be bought - but it does not. It lights up a bit: dim black - but it will not show a picture.
Do any of yo know - if there could be another cause: cables not not plugged in right - etc? I just don't see how the camera board could be the cause since it's just an extra device.
There are two white and black connectors - under the keyboard - that are part of the lid - which I plugged in. There's also the power plug for the screen (also under the keyboard) and that's plugged in. The only thing I can think of is the camera board. Let me know if I'm missing something - though - because - if so - I'll just do something to fix it now.
Has anyone tried windows 7 on inspiron 1420? how is it running? is there any benefit apart trying something new? a user experience description would give some insight before becoming unnecessarily brave ...
is there a rweal diffrence in size and weight? i currently own a r1705 and its increadibly big and heavy, how can they compare to mine? I am about to sell mine but i cant decide wich to get, since 1900$ for a similiar xps is just too much...
My graphics card failed, they sent me a new one under warranty. It seems slower. I play richards burn rally, and I used to be able to play it with no problem, but now it freezes or slows down all the time. What the heck? I can't even play the game now.
I have a Inspiron 1420 from 2007. Computer will not turn out at all. When you plug the adapter into the call the light on the adapter works but when you plug the adapter into the computer the light on the adapter goes out and the computer will not turn on. No lights or anything.
The laptop is on its last legs but there are things I need to get off the hard drive.
I've got an Inspiron 1420 running vista ultimate. I've had some bug issues in the past where I would set the screen brightness to 100% in both battery mode and plugged-in mode and it will still look dim but those issues always got resolved after a reboot.................................................
I did some searches and found very old posts pertaining to bluetooth issues...
Whenever I start Windows from Stand By or Sleep the bluetooth connection is hit or miss...If my bluetooth mouse does not work I go to device manager where my Dell Truemobile 355 + EDR has issues and if I shut it down/start it up it works fine.
How can I fix this, its frustrating going into device manager every other time I start up my laptop!
I've downgraded my Inspiron 1420 recently to XP SP3 with all the device drivers properly installed. Everything seems works fine except that I found fan1 & fan2 always on at max. high speed (very noisy) and CPU always max. at 1.5GHz (seems lost SpeedStep control, checked enabled in BIOS, with SpeedStep control cpu speed should drop to lower rate while the notebook is idle), the fans and cpu speed status are checked via the utility program I8KFANGUI.
If I enabled automatically temperature control in I8KFANGUI then fan1 can turn off as cpu cool down to below 55c and only turn on at Low speed at 60c (still very quiet, noise no noticeable) but still fan2 is always high at 4XX RPM constant rate, I8KFANGUI in fact reported fan2 is not controllable even for just turn on and off .....
why, there is a black dot in my lcd panel, the dot can be seen whether the lcd turn on or turn off, are there a leaked of my lcd liquid? can the forums help me, cause i'm a girl, and i do not know about notebook, cause i had used it for about 2 weeks,
i turned on my laptop and the screen had a horizontal line splitting into mirror images. it also has monochromatic horizontal lines all over the display. sometimes it will boot windows, sometimes it wont. i get an error saying windows cannot start do i want to start windows repair. it usually doesn't work and i end up going with the factory image restore.
i've gotten back to running windows and i've updated drivers, updated the bios, and nothing seems to stick. i've had it working perfectly (perfect display on the screen), but it seems after i did a windows update and it rebooted that it stopped working again. split screen, lines, the works.
i took apart the lcd screen to ensure all the cables were attached and they seem to be ok. i hooked it up to an external monitor and i didn't get the split screen mirror image, but i did get the monochromatic horizontal lines over the display. i can still use windows and the internet and everything.. it's just really hard on the eyes.
also, if it's the video card i know that most are integrated into the motherboard. mine is the nvidia geforce 8400m gs.. please tell me i can replace these independently.