I currently have the X300 in my laptop (inspiron 9300). I'm buying a second laptop for my sis and it's a dell 6400 and it happens to have the X1400 in it.
I was wondering if we can swap video cards...
Thoughts? I'm open to any modifications this would take to get it working.
I currently have the X300 in my laptop (inspiron 9300). I'm buying a second laptop for my sis and it's a dell 6400 and it happens to have the X1400 in it.
I was wondering if we can swap video cards... so that she gets the X300 and I get the X1400.
I think my graphics card is pooping out. Looking for another economic alternative. Way back when I bought this 7800 GTX GO for $250 direct from Dell.....now they want $500+ for it.
I know the x300 (64 and 128 MB), 6800 vanilla, 6800 Ultra, and 7800 GTX will all work with this system...because I've owned them all:-)
ANyone know if these ATI x1400's will work?
I really need a card cheap as possible......going to have to quit gaming till I get a new PC.
[url]
I was using a 7900GS in the laptop but that died...(excellent product from dell, dies after about 2 years)
Anyway I was just using it as a HTPC so I don't need gaming graphics.
Anyway, I was outputting fine 720p to my reciever and then TV, after replacing the card (with an X1400) I can't output anything to the recieiver. When I plug it in it says nothing is there?
I've also dried the DVI-hdmi adapter...instead of DVI-hdmi cable which shouldn't make a difference but I gave it a shot....
I tried plugging it in directly to a normal LCD instead of the reciever and still nothing
How do these two cards compare?
I assume the 8600m is better but how much better?
my 9400 was overheating badly, and the screen was blacking out etc.
dell decided to replace the system
i receive an old crusty 9400 from the depot that looks like someone had used it for a place to set their coffee for a while, and the outer shell cosmetics are chipped,scratched, and generally low quality.
but, thats not my real issue....this laptop has an X1400 card in it.
my original system had a 7800 card.
i didn't think this was a "like-for-like" replacement, so i escalated my case. the supervisor i spoke with didn't understand what the issue was all about i guess, cause she kept telling me that i received the SAME laptop as a replacement
she even got some guy from tech support on the phone with us to have him verify the specs between the 2 cards....but after about 20 minutes of him saying that my replacement system has the IDENTICAL card in it as the original. (7800 and X1400 are different....thats why they have different names and part numbers...)
anyways, i asked that the tech support guy get the actual card specs for each one out so he can see that the 7800 is 256 dedicated memory and X1400 has only 128 dedicated memory.
he puts us (yeah, the supervisor lady is still hanging out on the phone cause she says she can't request another replacement until she gets verification from tech support that the cards are in fact different...so much for knowing anything about these products).......anyways, we're on hold for about 5 minutes, we hear a click, and then he's gone.
this was horrible and amazing at the same time because the supervisor lady started saying "hello?...are you there?....HELLO?....tech support are you on the line?"...so i guess she got to see how wrong an frustrating dell customer service can be
horrible because she's like "well, let me got ahead and dial back into the tech support queue so we can get another rep...". i said no, she should work it out with the proper department and get back to me, cause it'd had been almost a full hour at this point.
so my question is, is there something special i need to say to get them to understand that an X1400 card is not comparable to a 7800 card? i remember seeing people posting on here with a similar situation a while back, but i can't find those old threads. as an aside, the laptop is still under the original 3 year warranty as well as complete care.
Some of you make think this is probably one of the most retarded things done, that may be so, but I also no use of the other graphics card seeing it doesn't fit in the newer e1705 frame.
I wish it did.. if there weren't any resistors where a pipe for a screw goes, then i would have done it, but.. that didn't happen to be the case, so here I am with a dual pipe X1400.
I just got done playing some CoD World at War, and here I am.. idling 15 minutes later, and I still can't get the X1400 above 125 degrees F, meaning that the dual pipes have dropped the idling temperature down by 30 degrees F!
Yes I have used Arctic Silver 5, I did on the single pipe frame too, but it seriously didn't make that much of a different if one at all, maybe a whole 3 degrees tops. Seriously can't beat this haha, now I should be able to get a little more performance and possibly even be able to O/C this card just a touch to get some more performance out of this bottom of the line card.
Just for those curious, even when I was running CoD WaW the graphics card never got hotter than the CPU core.. I can't believe how much of a difference this thing is making.
Because the dual pipe frame did come from the XPS Gen2/9300 body I did have to make a slight modification and chop off one section of it. And for spending a whole 15 minutes chopping it off, one would never suspect it wasn't supposed to look like that.
And now since beginning typing this the GPU has gone up to 127 but has been sitting there for quite some time now.
One last thing, for those curious... the half hour I did play CoD WaW.. the GPU fan never even turned on
I have been having some problems with my E1505 and graphics lately so i am running i8kfungui and see my cpu is peaking around 52 degree Celcius and my gpu is around 69 degrees celcius memory around 55 c and chipset at 49c..
View 7 Replies View Relatedjust got my less `than a year old` 9400 back from dell repairs UK
they relaced the m/board and 7900gs, but with a crappy x1400
When i rang dell, tech says we dont have any gs`s and we dont know if we will be getting any. but we got it going did`nt we? so its fixed!
Do they still make 7900gs?
Hey all. I read from alot of places when I talked about me still using Omega that I should switch since Omega hasnt updated in ages.
Now I remember finding a ati install file when I was looking for new Ubuntu 9.10 drivers that said it supported the x1400. (A real ati catalyst driver)
I cant seem to find it now tho..
So anyways, whats the best to use for gaming on the X1400 for my Dell E1505. And if you have a link? =) Omega hasnt failed me yet.. but doesnt supply anything new either, so if someone could link me to that ati catalyst driver I did find that was updated. (The one that DOESNT support ubuntu 9.10, I rem a older one kinda did, but you needed the later one for 9.10, which wasnt released)
Can I fit an X1400 in a dell Inspiron E1705 that came from a E1505 aka 6400 ?
My backlight burnt out on my laptop and on my external monitor there are Horizontal lines every where in different colors, like a redraw problem. So I figured graphics card.
I have a go 7800 and after a year and 1 month this happens >_<;
Is it cheap to repair a backlight? or Inverter board?
the GPU gets to 75 degrees and the fan doesnt spin.
Same with default cooling and 18kfangui.
What type of replacement fan do i buy for Dell 9400 with x1400 graphics?
Any checks i should do prior to opening the laptop.
I've got an e1705, configured with an ATI x1400.
I bought the nVidia GeForce GO 7900GS to upgrade.
After installing, I get these blocks and pixels during boot (see photo below)
Vista begins to load but never makes it to the logo or login screens. I get a blue Memory Dump message for a split second and then the system reboots.
I reinstalled the x1400 after this happened. I ordered a replacement for the 7900GS but the replacement has the same problem.
This obviously isn't a driver problem since it happens during POST, before any drivers are even loaded.
why this would happen with two different 7900GS cards?
For the record, I'm a Dell Certified technician for the Inspiron series.
It will work fine for awhile then all of the sudden it will freeze.
I Googled this, and people said tick Enable Hardware Acceleration to off.
I did so but now the video is slow pretty much all the time. What is causing this? I upgraded my video drivers in the hopes of it solving this problem, but it did not
Am totally new here. i need to change my HD that is 100 gb came with. i bought 250 gp but i dont know how to remove old hard drive. how can i remove old hard drive from Acer Aspire 5670 ? I opened the HD lid but then lots of stuff in side under silver cover.
View 4 Replies View RelatedI have a stock dell 9300 and it won't boot into the desktop? It turns to a black screen and nothing happens? I can go into safe mode but can't use system restore from there?
View 15 Replies View RelatedI have a Dell I9300, its starting to feel its age. I was playing COD4 today, and even though it played it pretty well I feel the video card is dying.
I was thinking about maybe pin-modding a CPU and buying maybe the 7800 GTX.
Is it worth it, and how hard of a swap would it be? I remember when I used to frequent the forums there were a few threads stickied about pin-modding, but I cant find it.
BEEN a While and A long time...
I currently order a Pentium M 735 1.7 Ghz 400FSB to overclock up to 2.26Ghz@533Mhz. Still waiting on shipping. Anyways, I am looking forward about upgrade my GPU Go 6800 OCed 370Mhz/700Mhz to Go 7800 (NON-GTX).
Yeah, GTX one is pricey for me.
I am wondering does the Non GTX version of Go 7800 still need 130Watts Adapter?
I did a lot of search all I could find is people talks about 7800GTX version.
In my thought I think 6800 to 7800 different is more pipelines and pixel fill rates and etc and the power needed is the same. Right?
So do I need 130 watts or I just keep 90 watts adapter which is perfect for NON-GTX Go 7800
My Beast's 80 gig 5400 rpm HDD is on its last legs, and I was wondering what Hard Drives are available for me to replace my old one. I will definitely be looking to upgrade.
View 10 Replies View Relatedrecommend a good after market HD (pls provide model if you canl)for Dell Insp 9300. Right now I have a Hitachi 60 GB.
View 9 Replies View RelatedWhat exactly do I need to connect my Dell i9300 laptop to a regular tv? (not HD) I searched a bit but couldn't seem to narrow it down. I know I need a cable, but am not sure of the part number, and software if any. I want to be able to display what's on the screen onto a TV.
View 12 Replies View RelatedAre the Dell 9300 HD's SATA or ATA-6? I'd like to upgrade my 9300 with a larger hard drive, somewhere around 100GB or so. Any recommendations? Do I just need to look for a laptop SATA drive 7200RPM or are there other specs I need to consider?
View 15 Replies View RelatedI'm working on my friend's old 9300(It still has the factory Dell image installed)
This thing has been on probably 75% of it's life. I want to pull is apart, remove the dell thermal compound, and replace it with ICD7 thermal compound,
but I am afraid that after so long the dell stuff will have hardened to the point of breaking things as I try to remove the heatsinks.
I'm looking to upgrade my 9300. I currently have the 1.6GHz 533FSB Pentium M and I'm looking to move to the 1.6GHz 400FSB pin modded to 2.13GHz.
I just have one question: will the following processor work?
http://cgi.ebay.com/Intel-Pentium-M-Dothan-1-6-GHz-2M-400-Laptop-CPU-
SL89T_W0QQitemZ350165690041QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item35016569 0041&_trksid=p3286.c0.m14&_trkparms=72%3A1205|66%3A2|65%3A12|39%
3A1|240%3A1318|301 %3A1|293%3A1|294%3A50
Well it looks like my dell 9300 finally bit the dust. It has been a great machine. Dell is going to replace it under complete care.
I do not know what I am going to get but I am hoping for a 1720 with the 8600 video card.
How does the 6800go compare to the 8400 or 8600?
I have searched here and google and can't seem to find any comparisions between these specific cards. I think mine is too old as all I could find were old links comparing them to older cards..
Should I be satisfied with the 8400 or should I fight for the 8600?
Dell warranty has been great. I have never had a problem and they fixed all issues promptly. I don't want to take advantage and fight for an 8600 if the 8400 performs as good or better than my current card.
So speedtstep is enabled in bios and it says its running at the minimum which is 800 mhz and it shows a maximum of 1.8 ghz. I am running A05 bios.
I have tried all the different power settings in windows and they do not change it. I try running a few games and programs and it still sits at 800 mhz. I think something is messed up and don't know how to fix it.
Anyone know what I can do to see if the speedstep is working correctly so Im actually using my cpu to its max when needed.
When I power on the green light flickers and it's dead.
View 15 Replies View RelatedI put my Inspiron 9300 into hibernate this morning, tried to wake it back up and all I'm getting aftet the Dell logo and status bar (POST) is a black screen with a blinking cursor in the left corner.
When I hit the Play button on the front of the notebook, it brings up the Dell Media Direct logo screen, but nothing happens.
When I boot with my XP CD and go to the recovery console, I can see the hard drive and files, though I can't access most folders because I get an Access Denied message.
I tried booting from my flash drive, but when I do, the flash drive is recognized as the c: drive and the hard drive isn't listed.
I also tried unplugging my laptop and battery and held down the power button for a few minutes to discharge any electricity. No luck.
I need a computer to tune/log my ECU in my car. I i have my old dell inspiron 9300 that need a new OS, batt and charger. I lost the recover disk and my brother ripped the key code sticker so i cant see the first set of numbers,
it came with XP pro is there any thing i can do to save it with out buyin a new OS. Like i said im using this to tune ECUs and data log using romraider and
ecuflash. So should i fix the 9300 or get a netbook, any suggestions on netbooks under 300 cheaper the better or a place to get a Windows OS?
turn on the power and for the first couple boots, I could see the POST info, but it was really distorted. Now the backlight comes on and I get nothing. I can hear the machine booting, and everything else seems fine, but no display.
I pulled the display off another laptop and it looks exactly the same, so I'm assuming it's the 6800, but I don't have any way to test for sure.
Now... if it IS the vid card, I'm not sure I want to shell-out $200 - $350 for a new vid card. The rest of the lappy works fine (in fact, I JUST upgraded the CPU). Think I could get any money for it?
Also, would would be a good replacement for around $700? I'd like the something with the WUXGA screen like I have now and at least something comparable to the 6800 I have now as well.
