Dell :: GPU Hits 95C After 2 Mins W/ Rthdribl (M1330)
Nov 6, 2008
after a long ordeal that included, crashes and vertical lines, faulty nvidia card, technician coming home, heat sink being stucked, endless chats with Dell representatives, laptop going to the depot, getting motherboard and heat sink replaced, etc... I just got my laptop back yesterday.
After experiencing certain familiar symptons (again!), I decided to run Rthdribl... After just 2 mins, the GPU temp (measured with CPUID Hardware Monitor) rose to 95C very fast! I got scared and stopped it there (so who knows if it could get even higher).
I guess this is not normal, and that I may have gotten another faulty video card, right?
When Im watching and HD movie or editing HD video material at some point the playback starts to halt and hiccup. Ive noticed that it happens when the GPU core temps hit 75 to 80. If I then wait a while and it goes down to 72 everything works fine again.
Is my computer downclocking maybe? Can I do anything to make it more stable, I dont mind if the fan works a bit more.
my studio xps 16 lags after 20 minutes of playing WoW any idea why? it runs at 40-60 frames then after a bit it drops down to 20ish. im also plugged in and running on "high performace"
"Hydrocarbon fuel cell? 600 degrees Celsius. Large Hadron Collider? -271 degrees. Microwave drill? 2,000. Your run of the mill Core i7 MacBook Pro can't compete with these extreme temperatures, but that won't keep it from burning your lap. PC Authority recently put the latest edition of Apple's sleek silver classic through a series of torture tests, and found that running Cinebench could cause the CPU temperature to climb over 100 degrees Celsius. The metal shell proved ineffective at dissipating the heat as well as the similarly equipped Fujitsu Lifebook SH760, which finished the same test at 81 degrees, and actually required PC Authority to run the MacBook Pro on its side (see pic above) to complete certain tests. The site thinks that Apple's cooling solution may be inadequate for a Core i7, but these results could be a fluke -- in our experience with the machine, we actually noticed an improvement over the egg-cooking solutions of yesteryear."
I have dell inspiron n4110 laptop. Every time i boot the system it takes 20 to 30 mins. But after booting my system works fine with out any hang. But booting alone it takes very long time even i formatted my system and tried. So i ran the diagnostics i got the below error
Error Code 200-01 42
Validation 10522
Msg: Hard Drive 0 - S/N 5WS2Q5WB, self test unsuccessful. Status = 7
is there something wrong with the f21 bios? my dv5t shuts down after 20 minutes of use after I flashed it in. To top it off, the only reason i installed it was because a hp csr guy said it would increase battery life!
I was wondering if the battery on the laptop is covered by warranty, i had my computer for about 9 months and i just ran a program to see my laptop battery life and it rated it at a 45% wear level
The laptop battery is 57720mWh stock and mines at 31402mWh now
I used to be able to run through 2- 1 hour classes on power saver with full brightness
I downloaded and installed the GlobeTrotter Connect in order to use 3g/HSPA on my z11wn.
I could make may lap connect to internet via the inserted sim. However, the connection only last for few mins, then drops. The only way to make it works again is turn off wwan, turn on and restart GlobeTrotter Connect, sometimes I need to restart lap aswel. this is very annoyed, because I can use mobile internet for only few mins, then must shut down and reset the WWAN adapter.
Recently I noticed that my touch screen sometimes starts to hits randomly at the bottom of the screen. This problem cause some windows became minimize and maximize on its own and when i'm watching video, the video keep pause, play and pause again. I tried to find any crack on the screen but found nothing.
Lately my laptop would freeze and I could see faint white lines only at the top of my screen. (lines do not go all the way down) This has happened twice in a day. Ctrl Alt Del doesn't work so I have to power down the system and it runs normal after that.
I'm really afraid its the dreaded vertical lines issues. I had my mobo + GPU replaced a year ago, still under CC warranty but its such a pain.
I am wondering if anyone know whether dell fixed the video card and heating issues (like many in this forum mentioned) yet?
I am very interested in this machine but I don't want to risk buying something that would burn out later. I am also interested in the new studio XPS 13 as well though I would love to know how it handles heat and the video card (i hate burned-out video cards..
i have been having problems with my xps m1330 ive had it for 3 years now and its been decent to me... 3 months ago when my warranty was up i sent it in to get the gpu and mother board replaced because of the warranty. Just recently it started acting up bad...
Would freeze left and right start running check disk when i tried to restart it...so i decided to reformat it seeing some scan i ran in dos was saying i was missing a system file. So i cleared the c drive and installed vista fresh... re-put my 60gb of music over and everything seemed fine for 2 days... not today it froze up on me ... i tried to restart and got a blue screen that flashed to fast to read and i tried to restart again and got a 2000-0141 error and alot of beeping and crap... so i restarted it and it was gone...
I've had my M1330 for about 1 1/2 yrs now. The first issue is that at one point 3 months ago,
I was being randomly electrocuted by my laptop when I placed my hand on the open space below the keyboard. About a few days after the random electrocution started, the battery died, and won't recharge at all.
Lastly, there is a constant whistling sound that was coming from the laptop ever since I bought it.
I'm out of warranty. Am I able to buy a new warranty for my laptop at this time or is it too late for me? And if it is too late, should I attempt to make repairs through Dell, or am I better off selling the laptop,
and then use the cash towards a lower pc, like those mini/EPC's that these companies are selling now?
recently I've installed nVidea driver from MS windows update ,then the fan is always run, then I installed nVidea driver from dell support site, but still same thing.My bios is A09 ,
and have I to update my BIOS to A15 ? or keep it A09 ,because I thing it will afect the battery run time (i.e the fan need more energy and then battery need discharging quickly)
I recentley just formatted my M1330 and installed the AHCI driver but i am still getting BSOD right after the green bar on start up? The only way to get around this is to disable AHCI and enable ATA from the BIOS. Is there a solution to this
I have a new XPS M1330 on the way. I originally purchased a refurb. M1330 and had a few issues with it and dell agreed to build me a new(non refurb) one with same specs. (crimson,T9500,LED display,4GB's ram,vista ultimate etc.). In the meantime my company has ordered us new latitudes and I don't really see need to keep the new 1330. My question is, when it arrives should I not even open it and sell it either here or E-bay and my second question would be how much could I expect to sell it for ?
My 1330 is my second XPS after owning the Origional 9100XPS tank.
I have the fully built M1330 with the best factory options Dell offers. Running Windows Home Premium.
I was very pleased with my PC however, I didn't like all these extra features taking up room. (Media Center, Back-up HD, ect)
So, after a little thought, I did a complete format of my HD. I removed all the other Partitions and only loaded the OS.
After doing the updates, re-installing my McAfee Suite, Office 2007 and the other basics; This computer is NIGHT and DAY compared to what it was. It was never a slouch by any means but I can't even explain how much better it runs now.
For anyone that doesn't need the silly stuff. I HIGHLY suggest you take the time to clean sweep your HD and reinstall from scratch.
I wanted to change my hard drive back to my original one and it turns out that when I first changed it in May I have screwed the low quality screws too tight. When I tried to unscrew them again, 2 of them (the ones that are towards the middle of the laptop) failed to unscrew and I pretty much turned them unusable with my repeated tries.
I'm not going to rant about the fact that Dell could actually use STEEL screws to prevent this type of thing, I'm just going to ask you Dell XPS M1330 owners if there's any other way around getting the hard drive out.
If I'll unscrew all other screws, can I take my XPS apart? Is there anything I should be particularly careful with (other than unscrewing the low quality screws that is)? Or do you have any tips on how I could unscrew the faulty screws?
I've owned a Dell XPS M1330 for about a year and am very happy with it. I want to buy a laptop for somebody as a gift, and I was thinking about the Inspiron 13, which I never actually saw. I know it's basically the lower quality brother of the 1330, I'm just wondering how lower the quality is.
I bought my M1330 a few days ago and am just waiting for it in the mail. I'm not so sure if I should downgrade to XP as I have heard that Vista is becoming more stable now that SP1 is out. First, my setup:
My intentions are to run a TrueCrypted system that can run for as long as possible.
For those that don't know and are too lazy to look further into TrueCrypt, it essentially completely encrypts a hard drive so that it requires a password to boot into the operating system. Because of this, everything that goes on while the system is running has to have real time encryption and decryption. This adds strain to the CPU.
What is your opinion? Should I downgrade to XP for the speedier system and longer lasting battery life, or won't it make much of a difference? For those who are running XP on their M1330, do you like it? What is the general difference between XP and Vista?
I placed an order last night for a refurb m1330. The spec for the system says that it is the LED screen and has a 2.0mp camera. I thought this config didn't exist -
