I've had my M1330 for about 1 1/2 yrs now. The first issue is that at one point 3 months ago,
I was being randomly electrocuted by my laptop when I placed my hand on the open space below the keyboard. About a few days after the random electrocution started, the battery died, and won't recharge at all.
Lastly, there is a constant whistling sound that was coming from the laptop ever since I bought it.
I'm out of warranty. Am I able to buy a new warranty for my laptop at this time or is it too late for me? And if it is too late, should I attempt to make repairs through Dell, or am I better off selling the laptop,
and then use the cash towards a lower pc, like those mini/EPC's that these companies are selling now?
Lately my laptop would freeze and I could see faint white lines only at the top of my screen. (lines do not go all the way down) This has happened twice in a day. Ctrl Alt Del doesn't work so I have to power down the system and it runs normal after that.
I'm really afraid its the dreaded vertical lines issues. I had my mobo + GPU replaced a year ago, still under CC warranty but its such a pain.
I am wondering if anyone know whether dell fixed the video card and heating issues (like many in this forum mentioned) yet?
I am very interested in this machine but I don't want to risk buying something that would burn out later. I am also interested in the new studio XPS 13 as well though I would love to know how it handles heat and the video card (i hate burned-out video cards..
i have been having problems with my xps m1330 ive had it for 3 years now and its been decent to me... 3 months ago when my warranty was up i sent it in to get the gpu and mother board replaced because of the warranty. Just recently it started acting up bad...
Would freeze left and right start running check disk when i tried to restart it...so i decided to reformat it seeing some scan i ran in dos was saying i was missing a system file. So i cleared the c drive and installed vista fresh... re-put my 60gb of music over and everything seemed fine for 2 days... not today it froze up on me ... i tried to restart and got a blue screen that flashed to fast to read and i tried to restart again and got a 2000-0141 error and alot of beeping and crap... so i restarted it and it was gone...
recently I've installed nVidea driver from MS windows update ,then the fan is always run, then I installed nVidea driver from dell support site, but still same thing.My bios is A09 ,
and have I to update my BIOS to A15 ? or keep it A09 ,because I thing it will afect the battery run time (i.e the fan need more energy and then battery need discharging quickly)
I recentley just formatted my M1330 and installed the AHCI driver but i am still getting BSOD right after the green bar on start up? The only way to get around this is to disable AHCI and enable ATA from the BIOS. Is there a solution to this
I have a new XPS M1330 on the way. I originally purchased a refurb. M1330 and had a few issues with it and dell agreed to build me a new(non refurb) one with same specs. (crimson,T9500,LED display,4GB's ram,vista ultimate etc.). In the meantime my company has ordered us new latitudes and I don't really see need to keep the new 1330. My question is, when it arrives should I not even open it and sell it either here or E-bay and my second question would be how much could I expect to sell it for ?
My 1330 is my second XPS after owning the Origional 9100XPS tank.
I have the fully built M1330 with the best factory options Dell offers. Running Windows Home Premium.
I was very pleased with my PC however, I didn't like all these extra features taking up room. (Media Center, Back-up HD, ect)
So, after a little thought, I did a complete format of my HD. I removed all the other Partitions and only loaded the OS.
After doing the updates, re-installing my McAfee Suite, Office 2007 and the other basics; This computer is NIGHT and DAY compared to what it was. It was never a slouch by any means but I can't even explain how much better it runs now.
For anyone that doesn't need the silly stuff. I HIGHLY suggest you take the time to clean sweep your HD and reinstall from scratch.
I wanted to change my hard drive back to my original one and it turns out that when I first changed it in May I have screwed the low quality screws too tight. When I tried to unscrew them again, 2 of them (the ones that are towards the middle of the laptop) failed to unscrew and I pretty much turned them unusable with my repeated tries.
I'm not going to rant about the fact that Dell could actually use STEEL screws to prevent this type of thing, I'm just going to ask you Dell XPS M1330 owners if there's any other way around getting the hard drive out.
If I'll unscrew all other screws, can I take my XPS apart? Is there anything I should be particularly careful with (other than unscrewing the low quality screws that is)? Or do you have any tips on how I could unscrew the faulty screws?
I've owned a Dell XPS M1330 for about a year and am very happy with it. I want to buy a laptop for somebody as a gift, and I was thinking about the Inspiron 13, which I never actually saw. I know it's basically the lower quality brother of the 1330, I'm just wondering how lower the quality is.
I bought my M1330 a few days ago and am just waiting for it in the mail. I'm not so sure if I should downgrade to XP as I have heard that Vista is becoming more stable now that SP1 is out. First, my setup:
My intentions are to run a TrueCrypted system that can run for as long as possible.
For those that don't know and are too lazy to look further into TrueCrypt, it essentially completely encrypts a hard drive so that it requires a password to boot into the operating system. Because of this, everything that goes on while the system is running has to have real time encryption and decryption. This adds strain to the CPU.
What is your opinion? Should I downgrade to XP for the speedier system and longer lasting battery life, or won't it make much of a difference? For those who are running XP on their M1330, do you like it? What is the general difference between XP and Vista?
I placed an order last night for a refurb m1330. The spec for the system says that it is the LED screen and has a 2.0mp camera. I thought this config didn't exist -
My current configuration is the following: CPU: T7500 RAM: 2GB
Is it worth upgrading to T9500 and 4GB of RAM?
Should I do it through Dell or by my own? I know that doing it by my own is much cheaper but what's happening with the guarantee? Moreover, will I need a new charger? How much does it cost approximately?
Is there anything else that I should take into account?
I wanna get rid of my inspiron 9100 and carry around something smaller. I've currently got the mr9800 video card and do some low detail gaming (mostly old games...BFV, BF1942 demo, WoW). I do need to use it for Second Life as part of my job. I also do presentations and stuff for work.
The cost/benefit ratio of lugging this thing around in comparison to its performance is waning. I've been thinking of forgetting the whole desktop replacement thing and take a cut in gaming performance for portability. The portable computers are getting to a point that even with low end graphics card they are comparable to my 9100 with the mr9800 (almost).
I've been looking at the m1210 with keen interest...it's pretty compact and cool. But, I've read the extensive thread about complaints related to the screen. If I went with the m1210 I'd be getting the AV package in hopse of the AUO screen which is supposed to be marginally better.
I've also been looking at the m1330 because of the LCD screen...it's a little bigger, but lighter. It's also about a thousand dollars more expensive (decked out with a decent screen, video card, blue tooth, etc.).
When all is said and done I'm looking at nearly identical specs, except for the LCD screen, the fingerprint doohickey, and the new dx10 capable video card. And, like I said, the m1330 is bigger, but lighter. In your opinion, is it worth it? Bear in mind that if I went with the m1330 I'd have to wait until there was some sort of coupon/sale or it turns up in the outlet...cause I can't drop 2,000 on it. I'm looking at 1200 tops. The m1210 is available decked out for 1100 (including tax). I'm just a little nervouse about the LCD problems...and the older technology.
Well I have the same problem again. I was usign the PC normally and then it turn off the display, still the computer is still running like normal (I know because sounds).
I dont think that this is GPU problems (NO vertical lines, no crash, no weird colors) in a old thread people says to me that this can be that the LCD is damaged.
so i will buy the HDMI cable and if this happend again I will connect the PC to a Maybe this can be a program? OS problem? a virus?..
My AC Adapter isn't being recognized by my system and won't charge my battery. Windows installed a couple updates recently, but other than that
I can't think of any reason that it would be doing this... Its the same adapter that came with the system, the only one that I've ever plugged into this computer ......
lost/forgot all passwords(embarassing event) now notebook locked in boot menu F2-F12 with screen that says please type in admin oradmin password.also disc stuck in drive as it will not eject in boot up system.
When I turn on the laptop, it says something about checking some files (the first is NSTF files, and the second is OS files) and that it recommend that I do it but it would let me skip it also.
I would do both, skip and let it continue, but both would end up having a blank screen afterward. It was working fine before ....
M1330 LED backlit LCD core 2 duo t7250 @2.00 GHZ 3 gigs RAM Vista home premium 32 bit windows experience of 4.1 (graphics card n vidia )
Well, for some reason, the other day when I clicked on the IE Icon on the desktop, the window would open to full size and then immediately close out.I could not keep the window open.
My apple Safari browser will work normally however. I thought malware or virus, but It continued to do this even after running spyware doctor, McAfee, ad-awatch and windows defender.
Finally I was able to run IE browser only if I disabled all browser add-ons . Then I re-enabled them one at a time, and the culprit seems to be McAfee Site Advisor Toolbar. If I leave this disabled, it seems to work ok but it still seems a little slow. Any reason why this happens? Also wondering if I should disable some of the other add-ons or are they there as a necessity .........
My friend has an XPS m1330 that cannot scroll in certain places. For example, on the program list in the Start Menu, it cannot scroll up or down. It shows the "scrolling" symbol next to the mouse cursor. This same problem occurs in certain games.
All drivers have been installed. Is this just a Synaptics issue?
