I purchased a new Inspiron 15 3543. Started using it and discovered it has no power led or any other leds to indicate hard drive is working, etc. No led whatsoever. Dell Support Chat confirmed it does not have any leds! Is this the trend to go to no led indicators? I kind of like to know if power is on and computer is on.Â
I am running Windows 7 64-bit on my laptop. When I originally got it from Dell, with all the software installed, it had a feature that would show "Caps Lock On" and so on when I turned on caps lock, or scroll lock.
I re-installed Windows since I upgraded the hard drive and want to know how to get this feature back. I installed the Dell Feature Enablement Pack, which gives me the "hotkey" menu, but no lock status options.
I've got HP Envy 6-1051er. I had to install fresh official Win7 x64 after my HDD totally crashed. After that I've installed all HP drivers from the official web-site:Â [URL]... Â But now there are no screen indicators when I adjust screen brightness or volume with Fn+F key. Â It works fine but without screen indication and it is really uncomfortably.Â
I have tried to put it in but there is a 1/4 in pin in the way. Is there a way to remove with out any harm. My Inspiron 9400 video card is having problems.
I have tried the 400 deg for 10 min but it did not last
Guide to Switching your Inspiron 9300/M170 WUXGA into the Inspiron 9400/M1710:
You can't simply replace the display screens. The instructions below must be followed for your screen to work properly.
Required Materials: - Small Phillips (I used #0 Phillips) - Either 2 monitors (9400 and 9300) or part #YPNL-N017B (Google the # to buy it).
Step 1: Remove the display assembly. Dell has an excellent guide for this on their website. [url] Click on Display)
Step 2: Remove the LCD Bezel (the gray trim around the screen). This requires removing the screws under the circular pads. I used a small flathead to pry open the bezel.
Step 3: Remove the 8 screws around the sides of the LCD. This will make it so your screen can be taken out. Do not worry about any screws on the top, they are for other things.
Step 4: At the bottom of the screen, there is a green circuit board. On the left side, you will see a screw holding the wire down. Remove this.
Step 5: Remove the LCD screen from the case.
Step 6: Look at the bottom circuit board again. This is the board we need to swap! Disconnect the 2 connections on the board. There should be on on the bottom and one on the side that is white.
Step 7: There will be 3 silver screws holding the circuit to the screen. Remove these screws. Note: This requires a very small phillips. I used a #0 Phillips to do the trick.
Step 8: Repeat steps 1-7 for your other monitor OR if you don't have another monitor...you will need to buy an inverter chip. The mfg # is YPNL-N017B. If you google that number, you should find a bunch of sites willing to sell it.
Step 9: Simply swap the bottom circuit boards between monitors or insert the new one that you bought.
Step 10: Follow steps 1-7 in reverse to reconnect everything back up! Before screwing everything back up. I suggest you plug it in first to test it out.
Congratulations. Your WUXGA LCD will now work properly on the Inspiron 9400. For anyone wondering, you MUST replace the bottom circuit board or the brightness controls will not work. You brightness will be stuck at the lowest setting and nearly impossible to see.
I am looking into replacing my old Dell Inspiron 6400, as it has been excellent -I think I should buy another Dell!
I am looking at the new Inspiron 15, which has a 15.6" display.
Can anyone tell me whether the actual laptop itself is bigger or smaller than my current 6400? I am interested in knowing width.
I see a lot of dead space on my 6400, and hopefully Dell realized this, and instead of making another 15.4" with dead space, they made use of this and gave a better display!
"Noise The Inspiron 15 is fairly quiet, though at times the fans did get a bit noisy. Basically you won’t hear this notebook at all in an environment with ambient noise, but if you’re in a library like quiet environment you might bother those nearby with some fan noise."
I am in the process of buying the new Dell Inspiron 15. I just want to know if i have made the right choice. It seems to be a really good laptop and i have seen some very positive comments within some review's on Youtube.
I got a phone status update a couple of days ago that said it was supposed to ship by Nov 5th (tomorrow). Normally when I order stuff from Dell, it shows up a lot sooner, but I guess the 11z is a hot item so it's taking longer.
I ordered mine pretty decked out... I got the dual-core Pentium CPU, 320 gig hard drive, Wireless N card, etc. I'll probably still stick a 500 gig drive in it and use the 320 as an external.
I recently looked to purchase another hard drive for my wifes inspiron 17 1720 and found that the hard drive came without a connector so some sort, it appears the dell needs a special connector to connect to the sata hdd. i looked at the 1st hdd and it has this connector, i contact dell and they didnt know what i was talking about
My Dell Inspiron has a problem, everytime i connect the power supply to charge it while its on the monitor will completely black out on me... Has anyone had or heard of this problem before?
BEEN a While and A long time... I currently order a Pentium M 735 1.7 Ghz 400FSB to overclock up to 2.26Ghz@533Mhz. Still waiting on shipping. Anyways, I am looking forward about upgrade my GPU Go 6800 OCed 370Mhz/700Mhz to Go 7800 (NON-GTX).
Yeah, GTX one is pricey for me.
I am wondering does the Non GTX version of Go 7800 still need 130Watts Adapter?
I did a lot of search all I could find is people talks about 7800GTX version.
In my thought I think 6800 to 7800 different is more pipelines and pixel fill rates and etc and the power needed is the same. Right?
So do I need 130 watts or I just keep 90 watts adapter which is perfect for NON-GTX Go 7800
I've owned a Dell XPS M1330 for about a year and am very happy with it. I want to buy a laptop for somebody as a gift, and I was thinking about the Inspiron 13, which I never actually saw. I know it's basically the lower quality brother of the 1330, I'm just wondering how lower the quality is.
So I'm trying to upgrade my ram, right now I have 2Gb that the system sees, however when I crack open the back all I see is 1 slot that has 1 chip in it which is a 1GB chip...
Long battery lifeCool and quiet operation of the machineSmall form factorRelatively lightFlawless, bright and crisp displayKeyboard has a good feel to it One of the major reasons I purchased this machine was because the hardware that came with it was plenty and mature. When I purchased the T400, the hardware was squeaky new but that brought with it tons of issues primarily with compatibility and bugs in the drivers. I'm a Linux user and the I13 worked out of the box with Debian and Ubuntu. The drivers are very stable and the machine is very quick.
This machine is *not* for gamers or heavy duty graphic artists. Its for the average Joes and Janes of the world who like to word process, surf the internet, watch movies and want to use Linux
I do have some gripes about this machine ( nothing is perfect you see ).The display seems to be a little loose. It wobbles while typing on a soft surface. Its not annoying but its something I dislike.It has only 2 USB ports. Dell could've put in atleast 3-4 ports. It would've been nice
Over all, my journey with this machine has been uneventful! Just the way I like it
My Beast's 80 gig 5400 rpm HDD is on its last legs, and I was wondering what Hard Drives are available for me to replace my old one. I will definitely be looking to upgrade.