Dell Inspiron 1521 :: Clean Install Windows 7 Home Premium On New 500gb Hard Drive
Dec 6, 2014
I had a problem with my old windows vista, and cannot restart windows. I put in a brand new 500hd. The windows 7 goes through the whole install procedure, but the last step "completing installation", it does not complete, but locks up. I have tried several times, and even removed the cd before the final restart, to have it search the HD for start-up soft ware, as I have read, but nothing works.
I have a Latitude E6410. Hard Drive crashed. Bought a new HD, installed and installed Windows 7 Home Premium. Got no wireless. Looking at Device Function I see no driver for:
why is my installation of vista freezing on the last step? its either freezing or taking a very long time. its been at the last step for about 20 minutes so far. It did this last time i tried to do a clean install with a dell disc without knowing about installing vista on hp machine with a dell disc. but now i have used vlite and made a anytime upgrade disc and took out the tell stuff according to this tut. the green progress bar isn't moving either. at the bottom of the screen where it says the upgrade may take several hours to complete, my screen doesn't have that.
I had to re-install Windows after a hacker locked my system. I hadn't had the unit long, so didn't lose tons of important data or files. But, I hadn't had time to really get to know my system either....so now I have the new issue of trying to determine what all the hardware is that is not recognized. I thought I would come to hp.com, find my drivers, download and be DONE.
(HP ProBook 4440S running WIndows Home Premium, 34 Bit)
I have yellow exclamation marks on the following devices in Device Manager:
1. Base System Device 2. Base System Device 3. Ethernet Controller 4> Network Controller 5. PCI Simple Com Device 6. USB Controller 7. Unknown Device
If there weren't SO MANY drivers, this could be simple!
How can one empty the recovery without to much risk to the system? D Drive is 89% full on Pavilion M6 1045dx entertainment PC - OS Windows 7 Home Premium
I have an Acer Aspire 7750 running windows 7 home premium. When I insert a flash drive in the usb port, I hear the sound that indicates the flash drive is inserted, but the drive does not appear on the 'My computer' window.
I have an Acer Aspire 7750 running windows 7 home premium. When I insert a flash drive in the usb port, I hear the sound that indicates the flash drive is inserted, but the drive does not appear on the 'My computer' window.
I installed some windows updates to my computer. The next time I turned on my computer it didn't act normal at all. It went to a start-up repair screen which scanned for a long time only to tell me "start-up repair cannot fix this computer" so I shut down and left my computer. I called Dell's support line and talked with technical assistance, the guy had me run some tests and in the end told me that there was nothing wrong with the hard drive and that it was my systems software that was the problem. didn't wanna restore at that point because wanted to save my pictures.
I ended up taking the hard drive out, transferring pictures onto my brothers computer and then I did a full system restore ( by tapping f8, choosing repair my PC, then choosing "Dell data safe restore and emergency backup" in the system recovery options screen. ) This actually worked and I restored my computer, however after installing updates again (quite a few too, when I shut down my computer it said installing update 1 of 72?! )
My computer went back to the start up repair screen and did the same thing as before. restored my computer one more time, and now again after updates were installed my computer will not work correctly. I do have the windows product key under the battery but would like to know how I can fix this problem. Will have to reinstall my windows software?
I want to do a clean Vista install on the above notebook, and if the time comes, restore the setup (OS) to the default config with minimal effort. Read a lot of threads on how to do this, but just need some help/advice on the following.
Currently the HDD partitioned as: 110MB (EISA Config), FAT16 Pri 10GB, RECOVERY (D:), NTFS Pri 136GB, OS (C:), NTFS Pri Act 2.5GB MEDIADIRECT, FAT32
Discs supplied with laptop: Vista Reinstall DVD, Dell Drivers & Utilities, Roxio, Dell MediaDirect
What I want is to do a clean Vista install to the OS (C:) partition (formatting it), but still keep the other partitions in case I have to resell my notebook. My main concern is not being able to restore the factory image back to C .....
It seems like every time I delete a file, I get a whit bar on my desk top that says Delete and the only way on getting ride of it is to restart my laptop, this white bar is on my display all the time on mater what I am doing.
This last time, I deleted the contents or my of my recycle Bin
My HP Pavillion dv7-6153nr notebook AMD Quad Core computer, using Windows 7 Home Premium is not working..It comes on, trys to boot, but I got Oxc000000f on screen with message that said: The boot system failed because a required device is inaccessable..Then I got the message saying System Disabled and number 58620517.
I just bought a new hp zbook 15 that comes with FreeDos and I bought Win7 Home Premium SP1. I installed the windows and it works until i try to connect to the internet. It says "no connection available" and the icon has a red x on the bottom right. When I checked the "device manager", I saw that i don't have either the network controller nor the ethernet controller. I have looked for then it the drivers section but i cant find them...
I've worked out the physical process of replacing the installed 200GB 2.5 inch Hard Drive to a 500GB Werstern Digital 500GB 2.5 inch Hard Drive. Overall it looks pretty easy. It's what happens once the drive is fitted and I turn on the laptop that I'm a bit worried about.
Do I just load the recovery discs as usual or is there something I need to do in BIOS? Also will the motherboard cope with a 500GB Hard Drive?
I am very computer savy and have built my own systems and overclocked etc for many years but this is my first laptop so any thing you think I should know just tell me.
Here I go , Why does this laptop have 5gb (4gb system ram and 1gb on the gpu) and a 32bit OS? I am waiting on the windows 7 upgrade but that will also be 32bit, Can I download a copy of windows 7 home premium x64 and use my genuine key, And if I do this can I get all the apps and drivers I need for full functionality of the laptop?
Also, When I turned it on brand new it is using 43% system memory, How much crap is on this thing lol? Is the upgrade cd for windows 7 a full new install or does it just upgrade the os without formatting the drive? Will the drivers needed for the laptop be bundled in the upgrade cd?
I am having problems with the internal microphone located at the top of the display on the HP G60 notebook PC, pre-loaded with the Windows 7 Home Premium operating system. All OS, PC drivers and system ROM have been updated to current.
The sound it produces is at best barely audible or usually completely inaudible. This is true when I use the internal Sound Recorder app as well as when I try to utilize Windows Live and Skype for either audio or video calls. The fact it behaves this way using Sound Recorder proves it has nothing to do with firewalls or internet latency. Also, I can hear and see the people I'm trying to communicate with just fine.
I first noticed the problem on an HP G60t system I purchased from hpshopping.com in early December 2009, which was a custom build and shipped to me. I opened a case with support and they told me I would have to ship it back for repair or I could just return it. I returned it.
Figuring I was just unlucky enough to get a bad system, I then went to Best Buy in late December 2009 and bought a second HP G60, this time a G60-535DX, which was similarly configured. Guess what? The exact same problem.
I have been researching these HP support forums and the customer reviews posted at bestbuy.com for the HP G60. It seems many people are having the exact same problems. I have tried all of the suggestions I have found, including the following, but nothing changes the fact the microphone quality on two HP G60 notebooks purchased from separate retail outlets / inventories is extremely poor and essentially non functional.
Updated HP Drivers and ROMUpdated Windows softwareUninstalled Conexant Pebble High Definition SmartAudio driver in Device Manager, then reinstalledUnplugged and removed battery, pressed power for 60 seconds, reassembledAdjusted Conexant Pebble High Definition SmartAudio driver property settings, including changing the Default Format, Exclusive Mode and Signal Enhancement settings.
i want to install leopard fresh on the new 500gb drive. so from my understanding, there's a migration assistant that will help me transfer my apps, my music, my photos, etc from my old drive (attatched via usb) to my new installation right? what happens to software licenses and stuff? i use mostly opensource software, so my main concern is will my ilife installation remain intact? I use omnioutliner too. it was bundled with my mac... will my registration remain valid?
I have an Inspiron 1525 with windows 7. I use system mechanic 11.7 for PC clean up. Every time I started the computer I was getting multiple hard drive errors and had to run deep clean followed by scan check. I thought I had a faulty hard drive so I bought a new one and completely reloaded my OS.
The notebook comes with an restore disc, but I really would like to have a simple and clean Win8 install, without any unecessary pre-installed stuff and separate partitions for system and personal data.
Can I make a clean installation of Windows 8 on my new Inspiron 15R SE? Does it affect warranty?
Do I need a product key or is it attached to the BIOS and will not be asked when installing from a disc? The drivers on Dell website will keep the SSD mSata and AMD Commutable Graphics working properly or will I need some Dell software to make it happen?
I recently purchased a Dell Inspiron 14z Ultrabook. I am looking to do a clean install of Windows 7 Home Premium. I am attempting to boot the installer from a USB drive and keep getting the error:
"A required CD/DVD drive device driver is missing. If you have a floppy disk, CD, DVD, or USB flash Drive, please insert it now.
Note: If the Windows installation media is in the CD/DVD Drive, you can safely remove it for this step."
This is also my first time working with a computer that has an SSD drive in addition to the main hard drive. Is there anything special that needs to be done when doing a clean install in regards to the SSD? I just want to make sure that I will be able to get the SSD operating the same way as it currently is.
I have just bought Inspiron 1440. My configuration is - Intel T6600, Windows 7 Home Premium 64-bit, 3GB DDR2 RAM, 320 GB Hard Disk and 512MB ATI Mobility Radeon HD 4330.
Further I have also taken 1 Year Complete Cover Accidental Damage Protection plan.
I am thinking of doing a clean install of windows7 on the machine with two key objectives:
Although the Dell Inspiron doesnot come with a lot of bloatware still it has few programs which I dont require.
The notebook is about 5 yrs old and has the original 20Gb HD which I wanted to upgrade to a 120. The operating system is XP and the computer runs fine; it just needs more HD space. I purchased a new WD HD which will not install. When I put the new drive in (with XP install disk in CD drive) the system will hang for about five minutes before finally getting to the setup routine. The setup sees the new HD and prompts to format it and I did. Once the format is done and it reboots, I get a BIOS message saying "fixed disk failure." At this point, it will not proceed to install windows. I've also tried booting from a floppy. Basically, the machine will not boot from a floppy with the new HD installed. If I remove the HD entirely, the machine will boot from a floppy and it will also boot correctly from the XP setup disk. It will also boot from a floppy with the old hard drive installed and it also boots from the CD with the old hard drive installed. I have sent the drive back to the seller and they tested it and said they could find nothing wrong. I tried installing the new HD about a half dozen times and it behaved the same way each time. I just went through this proceedure with another computer (replace old HD with brand new one), so I know how it is supposed to work. There is nothing I can configure in BIOS as far as the HD is concerned, and I have not been able to find anything that would indicate that I need to update my BIOS. My basic question is; why will the computer work with the old HD, but not a new one if there is nothing wrong with the new HD?
I've been trying to help my roommate out on this one and I think that the issue is hard drive is corrupt, but I'm not sure. A few days ago, he told me that Vista has been taking ages to start up.
I tried looking at to see what was going on and we couldn't even get passed the welcome screen. At this time, there were no errors showing up before the Welcome screen loaded. I got the Dell Vista reinstall disc and attempted to repair the files. Doing that didn't do anything. Therefore, I figured that his only option was to reformat.
I followed that guide that's stickied which shows you how to install the mediadirect and vista to each of there own partitions. After doing deleting the partitions and installing mediadirect to its own partition, I proceeded to installing Windows Vista.
Vista then finished installing and restarted automatically as it normally does. After restarting and going passed the first black screen (here you can hit F12 to get to bios), I get an error that reads .....
I have been searching all over various forums and tech sites for an answer. Currently I have 2 GB of ram in my 1520 that's running Home Premium. I've done a clean install after adding the 1 GB Turbo Cache module. It was only about $30.00 and figured worth the risk to try for performance gains. I haven't felt much there.
Does anyone have any positive feedback on performance when upgrading from 2 GB to 4 GB of RAM? I am running 32 BIT and don't care that the full 4 GB are not recognized. I don't want to waste money unless it will make some difference.
Aside from the clean install, I've been using X-Setup Pro, Tweak UAC and TweakIV for optimizing the settings for a little speed. I've also tweaked the services according to Black Viper's web site. The software tweaking has helped immensely.
I appreciate anyone's feedback on upgrading to 4 GB of ram. Sorry if this has been an old discussion getting beat up once again. However, prices are right around $75.00 for 4 GB of G Skill from Newegg.
