My lovely Dell Inspiron 1720 notebook was working quite happily but then the next time I switched it on and used a browser it started filling the URL box with letter 'd' by itself.
It then returned to work normally for a minute or so but then started filling a page with the letter 's' then 'a'. Sometimes I can get it to stop doing this by pressing another key but 'a','s' and 'd' have stopped working altogether except when they spring into life by themselves.
Virus checker says it's clean. What checks can I run to determine if it is a driver fault or keyboard hardware fault?
I have done a search on this so forgive me if its been addressed already. I found no answers.
I have seen taht a number of Inspiron 1720s have the 8600m GT card in them with 512 mb of memory, while others such as mine have the same card, but with 256mb memory on them.
I'm getting ready to start doing some photoshop work as well as some CAD work. I'm going to start my engineering degree as soon as I finish my current degree. Would this increase in memory help out in what I will be doing?
Will it also help in gaming? I pretty much use this laptop for everything and am trying to learn what I can about it so I fully understand it's capabilities and such.
I was bored tonight so I ran some benchmarks on my 1720, Specs in Sig Only change was the GPU was overclocked.
1st Pic is 3DMark @ stock clocks.--------3449 2nd Pic is 3DMark Overclocked-----------4366 Old 4259, 4271, 4280 3rd Pic is Vantage @ stock clocks--------P1115 4th Pic is Vantage Overclocked-----------P1457 Old P1410
I didnt get time to finish a Vantage run on my last set oc clocks since it needed tweaking due to display driver crashes. GPU temps never reached higher the 67*C when overclocked
my friend bought a new inspiron 1720 with an 8400m graphics card and he is trying to play counter-strike and it sucks so he wants to replace that with a different a better graphics card what are his choices, does he have the opportunity to put like a 7900 gs or no
anyone run a benchmark utility such as Lavalys Everest or Sisoft Sandra or similar to tell me the name of the manufacturer of the Firewire chipset in the Inspiron 1720 please? Not the motherboard or CPU chipset, just the firewire component of the laptop, please.
The benchmark software is free, and they tell you what components are inside your particular computer.
Reason I'm asking is that I have an external firewire soundcard (for professional music recording), and for maximum compatibility the soundcard manufacturer recommends the soundcard only be used with certain firewire chipsets.
i just bought a new dell laptop 1720, dual core T5250, 2gb memory, and nvida geforce 8600 gs, and im trying to play some source but its really laggy, i dont know if its my internet or what but im getting about an average of 50 fps, and my internt coneection i ested is download speed at 4922kbps, and upload speed at 489kbps.
The 4GB RAM Module is purchased from newegg. Unfortunately, newegg doesn't ship products to Singapore, so I had to use Vpost (Vpost gave a US address and everything)... Then Vpost will ship it to Singapore.
This is a follow up thread from Does the Inspiron 1520 Support 8Gigs and How to upgrade your M1530 to 6GB of RAM
Installation procedure: As usual, I only installed the RAM on DIMM A. I have not tested it on DIMM B, not too sure if it works or even to the extent of the BIOS or mobo detecting it.
UPDATED (Friday, Oct 3, 2008; 11:52am): DIMM B also works. See this screenshot for details.
I got myself a black keyboard. Just ignore it. No, it's not an Inspiron E1705 people. My friend from the UK (Migrated here, now living in Singapore) didn't want his Vostro 1700 anymore, so for no reason, he gave me the keyboard.
As usual, open the hinge cover and gain access to the DIMM A RAM underneath the keyboard. Instructions can be found here: [url]
Make sure you slot it properly into the slot...
Once fixed, especially the keyboard and hinge, boot into your BIOS to double check it. Here, it is written as 6142MB.
Also, make sure you're using the latest A09 BIOS released from Dell.
Things just don't stop here. Just because it "sees" or, "detects" 6GB of RAM, doesn't necessarily mean we can assume that the 6GB will be utilized because, it is widely stated that the 1720 cannot support more than 4GB of RAM, and so as most Santa Rosa machines. The same goes for the others. Here, I did some interesting "Mythbusters" style tests... I got lots of drawings and graphics that I do everyday, like 3DS Max and all those workstation stuff. But specifically, I am going to launch 2 of the most vicious RAM eaters out there. They're non other than Photoshop and Corel PhotoPaint.
Tuesday 8 Oct 2008 11:17am UPDATE: VMWare Workstation v6.5 will be tested!! This will really help to see if there's a performance boost with 6GB RAM installed, and be utilized..............................
So I've had the laptop since Aug 2007, works great, specs in sig. Only have one problem with it. the laptop likes to punish me. It shocks me. Literally shocks me. I think it's where the paint as worn off on the base. Around the corners, the bottom, ect. If I have it on my lap I need to make sure I don't wear shorts. I can feel a slight amount of electricity sting my legs, or forearms. It's a slight stinging sensation. Anyone else experience this? It's been going on for a little while. I thinking the only fix would be to A) repaint it or B) get a new base for it. Don't really want to repaint it as it might look crappy. Other than HDD issues from time to time, I've never had a problem with it and it's still my main computer.
Anyone else encounter this? Could it be that I have a pinched wire thats exposed and making contact with the base? If any, I think it would be the monitor wires, I seem to recall them being nicked and exposed.
I really need to know what compatible processors are avail for this Laptop my warranty is almost up and i want to spend about 300-400 bucks in upgrading the PROC and memory so would gladly appreciate some help i currently have the T7500 c2d 2.20
After putting up with countless BSOD's and failed harddrives on the Inspiron 1720, they send me a refurbished Studio 1747. Bigger hard drive space, HD screen, and twice the ram are very enticing to keep this machine. But the Inspiron's GPU AND CPU processors are faster (compare Intel Core i7 720QM processor and ATI Mobility Radeon 4650 graphics to the dual 2.0GHz centrino duo nvidia geforce 8600m GT). And I also found it silly that they would include an HD screen but not a blue-ray disc reader. So since DELL told me over the warranty phone line that they would "match the specs of your [my] old computer," should I just keep this or run some benchmarks on some games and figure this out? I don't want to spend more time on this if I have to if it is common knowledge that I got a good ad deal.
edit: forgot to add that the studio runs windows 7 64bit and inspiron is running w7 32 bit
I have a bit of a query in regards to the temperature of the Inspiron 1720 (Specs in sig) especially when under heavy loads, e.g. Gaming.
The laptop is designed for gaming as far as I know due to it containing a rather powerful graphics card (Nvidia 8600M GT), however when playing a game such as Left 4 Dead I have seen the temperature of the CPU peak at 91 Degrees..
I was just wondering if this is normal as I've heard reports that high temperatures going up and over 100 degrees would most certainly degrade the internal components...
So after the last couple years in school, my speakers are shot. I have an inspiron 1720 and was wondering how hard it is to change out the speakers.
I was looking around and found these: http://www.parts-people.com/index.ph...n=item&id=4807. I looked through the manual and couldnt find a tutorial on how to change the speakers or get to them or anything.
I'm looking to upgrade my 1720 to windows 7 64 bit. Drivers are not listed on the dell site. Only Vista 32bit and Windows XP. I'm looking to go windows 7 since it offers TRIM support for SSDs. I have a spare SSD and was going to put it in the 1720 prior to giving it to my brother.
I purchased CT699854 4GB kit (2GBx2), 200-pin SODIMM from Crucial.com for my Dell Inspiron 1720 laptop. The machine already had 2GB in two 1GB chips for both slots.
When I installed the new chips, Windows Vista Home Premium refused to boot. BIOS recognized the new RAM without problems, but when Windows started to load I immediately got a 0x7b stop error. This is strange, because that usually coincides with an AHCI problem, but that's already turned on in the BIOS with Turbo Memory and works fine.
When I take ONE of those 2GB chips out, leaving an empty DIMM slot, it boots fine. When I use one new 2GB chip in conjunction with one of the old 1GB chips, it boots fine and Vista recognizes 3GB of RAM. But when I push it to 4GB, I get the 0x7b BSoD. I've used all combinations of new and old chips, and it appears the new chips aren't bad as far as I can tell.
i really want to get rid of this stupid annoying speed-step technology. there is an option in bios that will allow me to turn it off, but it will put the processor at 1.2 Ghz, i want it at its fullest at 2.00 Ghz,
I have an older Inspiron 1720 laptop with T5450, which is showing it's age. Based on the Intel Santa Rosa platform. I have maxed out RAM to 4Gb already. I have a chance to cheaply acquire Intel T6400 ($50) or T6500($60) CPU.
I know that 1720 supports 800FSB CPUs according to docs (officially T9500 is the fastest). What I was wondering if it will support this newer T6400/T6500 cpu...
Hi There! I've got the Dell 1720 Inspiron since 2 years ago. No problems until these 2 past weeks. I use to play the NBA 2k10 with my laptop since last december, and everything goes right, but from last 2 weeks, if I play more than 3 or 4 games (15min. per game), the laptop shuts down by itself. I've checked the CPU and GPU temperatures with Everest, and with this game running they get 70-77 degrees...It's not so hot, is it? The fan normally gets fast in short periods of time, but it's not at highest speed during the game... I don't know how to improve the heat contro; I've update the BIOS, Graph. drivers and so... Any ideas? Thanks