i have the inspiron 640m laptop and i have just bought a new bush 42" hdtv im looking to hook my laptop to my tv but im not sure exactly wich type of wire i need i know its a hdmi but i dont know whats the other end that connects to my laptop can anyone let me know and if you know were to buy the right cable can you leave the url on the thread or you can mail me at...
View 5 Replies
I was amazed by the passion put by some people here, in older threads, about Dell not including HDMI ports on Inspiron.
IMHO, not using any kind of DRM-enabled interface it's a GOOD THING (tm) - please look why:
http://www.defectivebydesign.org/
Maybe that's not a coincidence that 1525s are listed as 100% free-software compatible...
http://www.dell.com/content/topics/s...973&lid=471885
http://www.ubuntu.com/dell
I'm doing a bit of shopping for friends... they're on a tight budget and have basic needs, so I thought the Inspiron 17 would be a good choice.
I was looking at the core i3 model listed at 799$ here.
In all the images we can clearly see an HDMI port on the left side of the laptop, but it is not listed in the Tech Specs section.
I asked a sales rep through chat but he couldnt provide me with convincing evidence that this laptop did/did not have an HDMI port.
I recently hooked up my Inspiron to a Sharp 32 inch LCD panel through an HDMI connection. Now, the video works beautifully on it, but I am having some problems with the audio. Instead of going through the Sharp 32 LCD speakers it still goes through the laptops. What can I do to make it go through the Television speakers?
View 10 Replies View RelatedI've had my laptop for over 20 months now and for about 80% of that time I have been connecting my laptop to a samsung HD tv - model LE19R86BD.
However about 2 weeks ago when I unplugged my hdmi cable.
My laptop wouldn't connect to my tv no more. When I plug in the cable I get a no signal message. When I unplug the cable from the laptop I get a no cable connect message (on tv).
I am owning Inspiron 1545 laptop and i own a TV which has only HDMI inputs. Any way to connect the laptop to the TV's HDMI Input.
My understanding is: Inspiron 1545 does not have HDMI outputs, only VGA.
My HDMI port does not work. I have a N7010, 17R. I tried downloading other drivers but nothing seems to work. Is there a way to tell is it's a mother board issue or driver issue?
View 7 Replies View RelatedWhen I looked at the "Overview" on the Inspiron 1720 at Dell's site I noticed that there were no DVI/HDMI video output ports. Can someone please confirm this? Is the only monitor output a VGA port? If so I think this royally sucks! My e1705 comes with both VGA & DVI...
View 14 Replies View RelatedNo Second Screen displayed while using HDMI port on Inspiron 1464 Laptop. I am trying to connecting my Samsung Plasma TV with HDMI to Inspiron 1464 Laptop but no second screen displayed....
View 3 Replies View RelatedI'm using an Inspiron 1564 and I just tri ed to watch a movie from Internet on my TV
I checked with configuration panel the sound output on HDMI connection, it was activated but not connected and, of course, I got no sound on my TV set.
What did I forget in order to have the sound over HDMI ?
I went to connect my wife's M1330 HDMI to my Sharp Aquos and nothing happens. I even tried the detect function and FN+8 and still nothing.
I tried every option in every control panel.
If I hook it up to a monitor hdmi to DVI, it works.
If I hook it up to the TV, it doesn't unless....I press FN+8 while vista is booting. Then I see vista booting on the TV. Once vista loads, it default back to the laptop screen and I can't choose to output to the TV.
Arrgghh
I even tried to update to a new intel graphics driver but stupid laptop says when I run the exe that it's not allowed or is unkown or something or if i manually upgrade the driver, it says i have the latest driver, which i don't.
Anyone have any insight to how to get HDMI working on this laptop?
BTW, this is on the intel onboard video card.
I have recently purchased Dell Inspiron 15R 5521N laptop with Windows 8 Pro. When I try to connect my laptop to an Acer monitor with an HDMI cable, it gives me a no signal error. But when the same laptop is connected to a Philips monitor using the same cable, it works perfectly. As usual I thought that the monitor was the culprit, but when I connected another laptop to the Acer monitor using the same cable it worked without any errors. So where does the problem lie. The HDMI cable is OK, the laptop is also OK as also the Acer monitor?
View 3 Replies View RelatedI have a dell studio laptop with hdmi out that works well with my hdtv but only have one hdmi input on my tv and is being used by something my question is if I get an adaptor that has hdmi to compontent output will it work
View 3 Replies View RelatedSo is there any way for the Latitude E series to ouput HDMI to a TV/Monitor?
View 6 Replies View RelatedI'm trying to get 5.1 sound through HDMI on my XPS M1330 with my Sony HT-CT 100 soundbar.
Is there any way to get 5.1, because I always get 2.0 .
Which version HDMI does studio 1555 have ? I dont know why computer manufacturers hide that information, cant they say HDMI 1.3 or HDMI 1.2 instead of just saying HDMI .. i am sure USB is not confusing since most USB are 2.0 now.
View 4 Replies View RelatedI have a Dell Studio 1537, and I reguarly use my TV with my laptop as an extra monitor, and when I plug the HDMI cable in, the audio switches over to the TV with no problems.
However, it seems that whenever I restart my laptop, (even if it was turned off after having taken the HDMI cable out) the audio is being sent through HDMI, and I have to go and change it to the speakers of the laptop.
Is there any way of basically setting the laptop to send audio through HDMI if it is plugged in, and the speakers if not?
My SXPS13 is running Vista 64 with all the latest BIOS and drivers from the Dell website. nVidia driver version 7.15.11.7982.
I plugged my LCD 37" telly in my laptop via HDMI. At first everything was ok and l was getting an image on the laptop screen as well as the TV.
I was then abled to switch modes so l just had an image on the TV. The screen was a bit overstretched so l was loosing the top, bottom, left and right of the image.
I went into the nVidia control panel and found a utilitily where l could re-size the LCD TV image.
All seemed fine until l clicked apply. The screen went blank and it appeared the laptop had frozen as l was unable to get the CAPS LOCK key to come on
I am posting a new thread regarding another issue I recently experienced. It is related to HDMI.
Previously I had my mobo replaced, because one of the HDMI pins was melted. Once replaced I tried it again. I have connected the HDMI cable and my laptop crashed. The speaker started to beep, the screen picture was distorted. I immediately plugged it out and notice that the HDMI connector was really hot. Tried it again and the same thing happened.
What do you think can cause this? The HDMI cable is 3m long. I heard somewhere that using a HDMI cable longer then 1.5m could cause problems, but I have used this cable for 1 year with my HP lappy and my WD TV live.
i came across the fact that you can only monitor audio if you install the sigmatel audio drivers with XP SP2 compatibility, but now that i wanted to plug my XPS via HDMI to my flatscreen, lo and behold... no HDMI audio as it used to be.
is it possible to have both scenarios or does one cancel the other?
i just got a new HDTV and I want to watch movies in surround through it. Unfortunately, passthrough is not working, only 2ch PCM stereo, I know my sound system can decode it,
it has done it through an old DVD player on optical no problem (monsters Inc DVD)
I have been conecting my Studio 15 laptop to my 720p HDTV for months. Some days it works fine, most days it doesn't. When I hook up the hdmi, the screen will appear on the HDTV, several seconds go by, both screens go blank and then the picture is back on the laptop.
I have tried starting the computer with the HDMI already hooked up and the TV at the correct input. I havetried adjusting the resolution on the laptop to match the TV resolution.
if it's possible to get the HDMI (both video and audio) working running XP pro 64bit on the XPS 1530?
View 10 Replies View RelatedI got my xps 1530 on monday and I used vista media center last night to record some HD shows. Later on I connected my 1530 to my HD tv and set the audio out to hdmi instead of the speakers. When I played back the show, there was no audio on my tv, but when I started up media center, the start up sounds and the sounds when you navigate through media center played back through my tv speakers. Does anyone know how to get it so the shows sound will play back through my tv speakers?
View 10 Replies View RelatedI'm having issues getting sound to pass through to my TVs via HDMI. I've set HDMI as the default and the sound still only comes through the laptop when playing back blurays
View 4 Replies View RelatedIv just started using my laptop to output HDMI and iv got a problem with the audio. Iv set the laptop to output the audio and it does work, but whenever a program ends and i open up another one it runs silently, despite me having changed nothing except the program.
In order to get the audio back i have to randomly unplug the HDMi cable, mute it, pause it, unmute it unpause etc and eventually one of these fixes the audio issue
Can anyone shed any light on what could be causing the audio to work sometimes and not work others?
I just purchased a philip lcd tv (42PFL6704D/F7), I plugged it with a hdmi cable to my m1330, image works well, but i get not sound from the tv...
I did a lot of searches, every answer is about set the correct "sound device". I tried everything and had not luck
I have a Dell Inspiron 1525 with an HDMI port. While the port was hooked to my AV receiver, I hit a few buttons on the receiver and somehow disabled the HDMI port on the Dell.
I cannot figure out how to reactivate the HDMI port. I know this is what happened--cable, receiver, balance of computer is all fine. Somehow, the received "talked" to the Dell and turned off or disabled the HDMI port or its driver, is my best guess.
I had some movies on my XPS 1530, so I decided to connect it up to my parents Samsung 37 inch HDTV while I was home for Thanksgiving. This would be the first time I have every used the HDMI output jack on my 1530 and I have noticed some strange things. First, when I connected the HDMI cable my computer it detected the HDTV but every time I try to switch to it, either by FN+F8 or in the nvidia control panel, it reverted back to the notebook screen. The only way I could get it to work was by rebooting the machine with the HDMI cable plugged in. After it reboots, I can then change to the HDTV no problem.
So why would I need a reboot to get it to work?
Second, after I finally get connected the only resolution that seems to work is 1280x720(720P). If I try to go any higher the picture on the HDTV will flicker terribly. I have connected my 1530 to other displays using the VGA connector and have gotten higher resolutions before, so what's the deal with the HDMI connector?
Background info:
XPS 1530 (Bios A12)
Fresh installing of VISTA Business
Video Driver - (laptop2go modified) 177.98
Any ideas? I can only get Stereo.
This is what I see
