I'm using an Inspiron 1564 and I just tri ed to watch a movie from Internet on my TV
I checked with configuration panel the sound output on HDMI connection, it was activated but not connected and, of course, I got no sound on my TV set.
What did I forget in order to have the sound over HDMI ?
Whatever I try to get sound with the HDMI, It won't work...
View 2 Replies View RelatedI have a Sony Vaio 17 inch full HDMI laptop using Vista. I have been using a HDMI cable connected to my TV for a few months now all working fine yet today for no apparent reason the sound has started coming through my laptop rather than the TV. I have gone to the control panel and tried switching the default sound to the realtec digital however this did not work and I ended up with no sound at all.I have tried two different players both VLC and Zoom player.
View 3 Replies View RelatedI am trying to find both the graphics and sound drivers for my compaq 8510p. I have tried all the recommended things...
View 1 Replies View RelatedI bought a Roline DP to HDMI cable hoping to be able to watch HD content in my livingroom and not having to plug an extra audio cable as DP should carry sound too.
When I do the same as on the youtube video, I get the following settings in the control panels: [URL] ....
But there's no sound coming out of the TV. I've tried it on my SyncMaster PC/TV Screen and on my Samsung TV in the living room. On the TV in the living room, the windows audio manager shows the device, but it cannot be selected as show above. It stays grey.
I've got a T420s with discrete nVidia Optimus graphics (Quadro NVS4200M). Driver version is 1.2.19.0 for nVidia HD-Audio and 8.17.12.6696 for NVS 4200M. This information comes from the device manager. I installed my system from scratch and used ThinkVantage System Update 4.
Where the problem comes from? I could only imagine that the cable isn't capable of carrying audio, but that seems rather illogic, does it?
I have recently purchased Dell Inspiron 15R 5521N laptop with Windows 8 Pro. When I try to connect my laptop to an Acer monitor with an HDMI cable, it gives me a no signal error. But when the same laptop is connected to a Philips monitor using the same cable, it works perfectly. As usual I thought that the monitor was the culprit, but when I connected another laptop to the Acer monitor using the same cable it worked without any errors. So where does the problem lie. The HDMI cable is OK, the laptop is also OK as also the Acer monitor?
View 3 Replies View RelatedI own a Studio 1555 and i am having this peculiar problem with my onboard LAN connection. The LAN cable is connected to the NIC, yet it is displaying cable not connected. I need to reconnect the cable (remove it from the NIC and reconnect it) and it displays cable is connected and the connection ensues. Once i restart the machine, the same is displayed and i will have to reconnect the cable once again in order to get connected.
I do not want to reconnect the cable every now and then, when i reboot the laptop..
Ive got an E6400, great machine.
im trying to hook up my LCD (LG 720P) with DP to HDMI cable
the video is great but there is no audio, ive tried with my friends tv (sony 1080P), audio goes great, im on win7 and th graphics chip is intels GMA
windows recognizes my tv but there is no audio
I'm a proud owner of a DELL xps M1730 laptop. Recently I experienced using my laptop on my television screen (LG). However, recently something went wrong. When I try to establish the HDMI connection my laptop won't change it's screen to the television screen.
It changes the resolution on the laptop screen and that's it. When my friend get's here with his xps m1730 it does work for him.
I tried connect a screen trough the DELL quickset but nothing I do seems to help and it is hard to find information on the web concerning this issue. Maybe it is a very easy procedure and I misschanged some of the settings....
I am considering a 24" monitor which I need t share as a second on my 1710, as well as the primary on my gaming rig (2X8800GTX SLI).
I want to drive it @ 1920*1200. I don�t want to use the VGA connector for one of the machines, when I do resolution drops to a max of around 1600*1100. So, I am looking at some of the monitors that have DVI and HDMI connectors. The thought was to connect one of the machines via HDMI with a special cable like one from bluejean cable, and use the other straight through, and choose a monitor with an easy one touch toggle between the two.
I read some horror stories that the HDMI link via a DVI-HDMI cable isn't optimal, and someitmes has its own resolution or sync limits. Does anyone know about this?
My other choice is a cheapo DVI switch, but it would be cool just to hit the input button.
I currently have a 13" Unibody Macbook and I'm looking to hook it up to a 32" Sony Bravia LCD.
I am looking to purchase the Monoprice Mini-DP --> DVI dongle and hook that up with my Monster 400 HDMI to DVI cable.
I have the very same cable which I use to connect my HP desktop to my Sony LCD TV.
My only concern right now is what I read about DVI-I versus DVI-D. On the cable's packaging it says "SINGLE-LINK Connection ... For connecting HDMI to DVI components up to 1080i resolution"
I'm looking at the pins on the DVI portion of the cable and its group liked this:
9 pins (3x3) SPACE 9 pins (3x3) SPACE horizontal metallic piece.
The Monoprice adapter and the Apple adapter looks different in terms of the slots which the pins will go through.
I just want to make sure I have right components before I buy the adapter.
I have a Latitide E6500 with the Nividia Quadro NVS160M graphics card. I'm running Vista Business 32bit. My E6500 vid outs are s-vga and displayport. I use my laptop mainly in my home office and I would like some more real estate, when in the office 1440x900 is just not enough. When looking at monitors displayport does not seem a common input but most have HDMI.
I then looked at monoprice and saw two possible options for displayport -> HDMI, an adapter or a cable. What is the difference between the two and which should I use if I want both audio and video signals transmitted? Or am I stuck using a monitor that has a displayport input?
I have a dv6500t computer. I recently bought a 23" lcd monitor (HP w2338h) to go with it. I was using the vga cable that came with it, which works perfectly fine. I then bought a link depot hdmi cable to use to connect my monitor. The cable works fine, but when I restart my computer (with the hdmi cable still plugged in) my computer brings up the blue screen that says my computer was shut down to prevent further damage. But when I take the hdmi cable out, this screen doesn't pop up and shut my computer off. Why does the hdmi cable do this?
View 5 Replies View RelatedDoes anyone here own these cables [url], or a different brand? If so, would you care to share what you think about them and if it's better than using the MDP to DVI converter?
I'm thinking about pulling the trigger on these but it seems that this is a new product and there aren't that many reviews yet so I'm still a bit hesitant.
What are your thoughts?
Or if anyone owns the adapter [url] .
Also, I'm seeing that you can't get audio through the adapter for the MBP. If that is the case, would I be able to get audio if I went through the MDP -> DVI ->HDMI route?
How do I connect my laptop to my HD TV with a HDMI cable? I've tried all the suggested routes, checked the TV and cable, but still get a blank screen. Are there updates or drivers I need to install?
View 3 Replies View RelatedI have an Aspire V3-571. Please see summary below in bullet points:
1. Used to work fine when connected to my TV (via HDMI cable)
2. One night, when laptop was connected to TV, picture started flickering
3. After 20 minutes, HDMI signal cannot be detected from the laptop
4. Updated Intel HD Graphics 3000 driver (Date: 1/29/2014 Version: 9.17.10.3347)
5. Tried using different HDMI cables
6. Pressing Fn+F5 does not do anything
My TV's HDMI port works with other devices when connected to it. What am I missing here? Is there a hardware defect with my laptop?
Does something like this exist?
View 10 Replies View RelatedI have a Pavilion dv6 with windows 7 operating system. the cable works with my friends computer to the tv but not from mine to the Tv.
View 9 Replies View RelatedI'm trying to connect my Pavilion dv6 to my HDTV using an HDMI cable. I'm getting video, but not audio from the TV speakers. The problem started after I upgraded from Vista to Windows 7. I had no problems with HDMI with windows Vista.
I've tried updating/reinstalling the audio drivers from HP's website, but it doesn't work. I've also tried going to the control panel and changing the playback device, but the HDMI audio device icon no longer appears in the playback devices dialogue box. The only playback devices are Speakers and Dual Headphones, Independent Dual Headphones, and SPDIF (Digital Out Via HP Dock.)
Why is the HDMI device not shown in the playback dialogue box?
I have a hp probook i3 4320s, and recently i buy a new lg led tv, my problem is my new tv cant get signal from my laptop....
View 6 Replies View RelatedI have tried two HDMI cables for 3 year old HP Pavilion g6 to connect with HDTV. Both cause the HP to overheat and shutdown. It worked a year ago but former cable broke. I have dusted by blower underneath. I was trying to watch free movie on HULU. Does not overheat when using otherwise.
View 3 Replies View RelatedI connected a dvd drive to my laptop using, a sata to esata cable. my laptop has a ESATA port.
I don't know if you should post some kind of config summary (if yes let me know, I will do it promptly) basically I have a HP DV6t quad edition with an Intel 5 serie chipset,
PM55 express chipset (dont really know if it make any sense but still, I will just say state it) so I installed Intel Matrix Storage and when I connect the drive I can see it, but windows 7 does not see it, it's like I didn't plug anything in. [url] also my bios is almost configurable, I don't know why I can change the time, the date, the admin password, the boot order, virtualization, fan on/off that's pretty much it. so what options do I have if I want to make this dvd drive work?
I recently purchased a Lenovo ... so I was trying to get some games running on my big screen with my lenovo y50 laptop which I should have set to always use the 860m dedicated card. But when I'm running a second display it defaults to using the Intel 4600 chip, obviously not great for running games. I've tried looking every where in the Nvidia control panel and Intels control panel but can't find anything to fix this issue. That HDMI port is the only display port on the laptop as well.
View 4 Replies View RelatedSo for a while now I've been using my laptop while it's plugged into my tv. But the parts of the screen are cut off (the top, left, right and bottom, which doesn't make sense since there is no reason to cut off all sides) I've seen guides telling you how to disable the overscan in the video card settings or in regedit but the thing is, I HAVE NO VIDEO CARD. The guides online assume you have one, but I don't my laptop is as plain as it gets. How can I disable the overscan (if possible)?
I have searched through my tv's settings but have found nohting even remotely related to overscan settings.I have a hp pavilion 15-n221sa running windows 8.1 and I'm trying to get the display to work on a samsung le46b650 tv.
my hp 2000 laptop doesn't recognize tv with hdmi cable. I get the "doesn't recognize any other monitor" error when I attempt to "detect".
I recently upgraded to windows 8.1
I have the AMD Radeon HD 6310 Graphics
The TV is a Hotel Phillips HD TV.
My game system works using VGA cable
When I connect my G505s laptop to TV via the HDMI port , the audio does not go through the TV.
I found similar topics, but nothing works [URL] ......
On CONTROL panel i select SOUND.
I do not have the HDMI Output listed under “Playback” tab, right click in the playback window and select Show Disabled Device and Show Disconnected Device. And still it didnt show the HDMI output. :/
Under Playback It shows only Speakers and Headphones. (Still after selecting Shoe disabled device and Disconnected Device). Under recording Stereomix and microphone.
What would fix this? Its my laptop missing any file/ program or driver? Or is there problem with audio card or display card?
( I download drivers from [URL] ....... so i mean its Updated).
When i turn on the laptop, display doesn't turn on even when external monitor connected via VGA/HDMI.. I hear CPU Fan sound, keyboard lights on, power light on.
View 1 Replies View RelatedI just got this U530 and wanted to use a dual monitor setup with a monitor that only supports DVI inputs (Samsung SyncMaster BX2335). I bought a cable for the purpose: an HDMI to DVI-D cable. I cannot seem to get the laptop to recognize that there is a monitor attached, however.
Am I going to have to use a port replicator instead or use some sort of USB 3 to DVI setup? I have no other video output options built into this computer.
I bought this computer which is running 7win64 to update my T60 which I use with my home TV, a samsung digital running at 1360x768 resolution. The computer's native resolution is 1920x1080. I bought an hdmi adapter for the displayport from lenovo when I ordered the computer. Initially, the display works and at first it ran long enough to get everything set for a nice crisp display that fits the screen perfectly. The sound is there too, and is passed on to my receiver by the TV. Very nice. But then it begins to blink off until it doesn't work at all (the sound is cut off too). Lately it won't stay on long enough to review settings.
All updates are in place, both from microsoft and from lenovo. This has Intel 4600 graphics built in, and intel has graphics drivers available, but won't install them because of the lenovo supplied drivers.
I can't get any support from lenovo support because another device is involved.
I read online of some early users who had this problem with a docking station and i guess the problem was resolved with an updated driver.
Anyone has a review on Inspiron 1564 please? I am debating on this one with studio 15. This inspiron has numeric keypad. That's why I love it. Since, I personalize this one. So I think that it is similar to stuido 15. However, studio 15 has i5 520. I dont know i5 430 is good or not? When will Dell have i5 520 on inspiron 1564?
View 10 Replies View Related