HP/Compaq :: DVD Drive Connected To Laptop With Sata To Esata Cable, Drive Is Not Recognized By Windows 7
Feb 22, 2010
I connected a dvd drive to my laptop using, a sata to esata cable. my laptop has a ESATA port.
I don't know if you should post some kind of config summary (if yes let me know, I will do it promptly) basically I have a HP DV6t quad edition with an Intel 5 serie chipset,
PM55 express chipset (dont really know if it make any sense but still, I will just say state it) so I installed Intel Matrix Storage and when I connect the drive I can see it, but windows 7 does not see it, it's like I didn't plug anything in. [url] also my bios is almost configurable, I don't know why I can change the time, the date, the admin password, the boot order, virtualization, fan on/off that's pretty much it. so what options do I have if I want to make this dvd drive work?
View 10 Replies
ADVERTISEMENT
Jan 10, 2010
2.5" SATA Hard Drive to IDE 44 Pin Adapter For Laptop Drives ....
View 4 Replies
View Related
Mar 11, 2009
I am having problems with some Blu-Ray DVDs in my DV9774ca with a optiarc BC-5500A ATA.
When I put some Blu-Ray DVDs in the drive starts to spin and makes the normal searching noises for 30 seconds and then it stops without doing anything at all.
I decided to try download a firmware update, but the site says not to flash SATA drives with PATA firmware.
How can I find out what it is? I can only assume its SATA. The firmware I found is for PATA!
Also I assume that the firmware I already have is older than the downloadable version (not from H.P.). The downloadable version is 1.05 from November/08. I bought my laptop in Feb/08.
View 3 Replies
View Related
May 27, 2009
Simple...Installed Windows 7, everything was working fine...till today when the dvd drive isn't recognized by windows. Nothing in my computer..
I can insert/eject a disc only during the boot sequence.
View 7 Replies
View Related
May 1, 2010
the hard drive quit. after 2 years. lucky, they are not that expensive anymore. I bought the same as the original from Amazon. After trying to install Win XP Pro, it gave me the message: no hard drive found.
Means, it does not have a partition, no format. The drive ( a Toshiba) did not come with a CD to do that. (WD usually has that utility). I did a Diagnose from the Bios, didn't work either.
Does anybody know what I have to do to make the maschine recognize the drive , how I can add a new partition onto it ?
View 3 Replies
View Related
Jan 13, 2009
Is the hard drive interface SATA or SATA II?
View 10 Replies
View Related
May 28, 2014
I need Windows 7 64 bit driver for AMD model HP 15-b103au Product D5F70PA,I cant even Install windows as its asking for sata driver for drive.
View 3 Replies
View Related
Nov 9, 2009
I have a 3.5" enclosure for HDD that have an horizontal "L" e-SATA interface but i don't know what kind of e-SATA have DV7 that i ordered. Can someone tell me what kind of e-SATA cable should i buy?
View 3 Replies
View Related
Jul 17, 2014
I was able to install a new: PNY Optima SSD7SC240GOPT-RB 2.5" 240GB SATA III Internal Solid State Drive (SSD) in my ThinkPad X220 model 4287. I installed the latest BIOS before the upgrade and did a clean install of Windows 8.1 Pro. The installed went smooth with no issues. I proceeded in installing all Drivers and utilities. Then I noticed that when I restart Windows, the BIOS does not recognize the drive and proceeds to try to boot from the Network, Intel Boot Agent. It does not seem to recognize the SSD drive.
The only way I can get it to boot from windows again is to TURN OFF using the power button and then turning it back ON. I tried the Lenovo SSD firmware update utility to see if my drive needed an update but it did not find any update for my drive. I also tried to the PNY support site and downloaded the firmware update to see if it found any updates for my drive and none where available. I hope LENOVO can release an update to their SSD firmware update tool to fix my problem. I am also not sure if any of the utilities that I installed may be the root of the problem. So right now the only way I can get Windows to load is to turn off and turn back on the laptop. Windows restarts will not work.
View 9 Replies
View Related
Nov 16, 2009
Does anyone have an external drive connected via esata, ideally to a XPS 1645 but if not any other XPS 16 will do, and if so what sort of transfer speeds do you get?
I ask as I need to sort out some external storage and I was all set to get a small cheap NAS such as a Netgear Readynas Duo but from the reading I've done the transfer speeds seem pretty low even when using a gigabit network (around 24 MB/s reading and less than that writing)
View 6 Replies
View Related
Jan 3, 2009
Something recently happened to my laptop, and now whenever I boot up my laptop, I get a message stating that "No drive detected", and I don't know if the hard drive might be damaged or not.
I tried connecting the hard drive directly to a desktop pc since it's a sata hard drive, but my desktop pc just froze on the boot screen whenever this hard drive was connected.
I also was going to try and use a hard drive external case to maybe connect it to the pc this way, but I wasn't sure if it would work
View 10 Replies
View Related
Oct 25, 2014
I have a HP 15 Notebook PC with no dvd drive recently I was sent the system recovery cds from HP. I dont have an external dvd drive. What i do have is a Toshiba Satelight laptop with Widows 7 and a good dvd drive. Also I have a 500 GB external hard drive. I was thinking maybe I could copy the disks onto the external harddrive with the Toshiba dvd drive. Then attach the external hard drive to my HP 15 Notebook by usb port and install Hp recovey disks from the external hard drive.
View 2 Replies
View Related
Dec 28, 2009
Laptop is an Acer Aspire 1640. 2.26GHz, 2gb RAM.
Laptop was working fine with the factory Hitachi HTS541680J9AT00 80gb drive.
I purchased a Samsung HM160HC 160gb drive as it's supposed to be the fastest PATA laptop drive available.
I put it in and the laptop just kept saying "no operating system found" with the XP disk in the drive.
I tried several optical drives and got the same issue with all of them.
I then hooked a USB optical drive up and it wouldn't boot from it.
I removed the internal optical drive and the system then booted from the USB drive and loaded Windows fine.
I just assumed it was a fluke and once Windows was done loading I removed the USB drive, installed the factory internal optical again and turned it on...
"No operating system found".
This is where I'm stuck. If I remove the optical the system boots into Windows fine. There were no issues like this with the other hard drive.
I have tried setting the hard drive as Master, Slave, and Cable Select with no change.
Laptop has the newest BIOS.
Samsung does not offer firmware updates on their hard drives.
View 9 Replies
View Related
Jan 7, 2009
Been trying to get all my ducks in a row for when my 1510 arrives, DLing drivers and such.
Been reading some old threads/how tos here on doing a fresh install of Windows XP. It was suggested to put the SATA drivers on a bootable flash drive for installation during the Windows install, so you would be in AHCI mode when finished and not have to try to do it later.
Is that the current method of installing the SATA drivers for AHCI?
View 6 Replies
View Related
Nov 28, 2008
I am considering a 24" monitor which I need t share as a second on my 1710, as well as the primary on my gaming rig (2X8800GTX SLI).
I want to drive it @ 1920*1200. I don�t want to use the VGA connector for one of the machines, when I do resolution drops to a max of around 1600*1100. So, I am looking at some of the monitors that have DVI and HDMI connectors. The thought was to connect one of the machines via HDMI with a special cable like one from bluejean cable, and use the other straight through, and choose a monitor with an easy one touch toggle between the two.
I read some horror stories that the HDMI link via a DVI-HDMI cable isn't optimal, and someitmes has its own resolution or sync limits. Does anyone know about this?
My other choice is a cheapo DVI switch, but it would be cool just to hit the input button.
View 10 Replies
View Related
Aug 15, 2009
I posted earlier a message about my Vostro 1500 which suddenly won't start. I called Dell and a local repair shop, and both indicate it's most likely the motherboard, and will cost anywhere from $300-$500 to fix.
Just not worth it - I'll get me a new lighter laptop instead. However, read where you can get a hard drive case to get the data off the hard drive and to use as a backup drive
View 7 Replies
View Related
Jun 15, 2009
My setup is as follows:
Acer 5315-201G08Mi
Intel(R) Celeron(R) CPU 550 @ 2.00GHz (Socket P)
TOSHIBA MK8046GSX
Intel GL960 chipset
IO chip being 82801HBM (ICH8-M).
2G DDR2 533 ram
Vista Home Basic
MB - ICL50
I've noticed that the supplied Toshiba SATA II drive is running in SATA I mode and not SATA II even though the controller chip supports SATA II.
Perhaps the BIOS has disabled SATA II?
In addition, I'm keen to upgrade the CPU to a T7300, I assume if I follow the directions on this site, everything should work fine? Any known problems with this model?
View 7 Replies
View Related
Oct 23, 2009
I was checking my hard drive with hdtune and saw something interesting...the program said that my hard drive is SATA I. Am I mistaken or is this for real? I have a CTO VGN-FW490J, got it in June 2009. The hard drive is a Fujitsu MHZ2320BJ. I did a quick google and the descriptions say it is SATA II, so I'm confused. Is it the motherboard that determines the SATA speeds or the hard drive? What's even more confusing is that in the official FW thread, someone said they installed a SSD and they're getting sequential reads at about 250mb/sec so that person definitely is in the SATA II range. I attached an image of the part that shows my hard drive info.
View 3 Replies
View Related
Jul 18, 2009
What concerns me is that the model I'm looking at (SR490PBB) states that the interface runs at SATA150 when pretty much everything is set to 3Gb/s. Does anyone know if the hard drive is SATA150
View 4 Replies
View Related
Apr 9, 2009
Yeah so my brand new E4200. Went to install Ubuntu on it. Voila the Esata cable connecting to the external drive refuses to come out of the notebook.
Please tell me there is a magic button that I have to pus
View 6 Replies
View Related
Jan 11, 2010
How do I tell what type of hard drive I have in my Inspiron 1520? I am pretty sure it's IDE/ATA, but I am seeing info in my web research that says SATA. Not sure which to buy. Maybe this is a dumb question.
View 6 Replies
View Related
May 25, 2009
got a inspiron 1545 recently with a SATA 320 gb HDD / 4gb ram with Windows Vista Home Basic. Like most of us I hate Vista. So I created a partition & installed XP.
Used a program "EasyBCD" to setup dual boot. I get the dual boot screen at startup. But only XP boots. After a little probing, came to know that there are only 2 options in the BIOS for SATA operations. AHCI & ATA. If I select ATA I can boot only to XP. If I select AHCI then I can boot only into Vista. Searched around but the solutions were a bit over my head. Really appreciate if anybody could come up with something in lay mans terms.
View 10 Replies
View Related
Feb 27, 2013
I have a Dell Inspiron 1750 and everything works fine EXCEPT I can't access C:. What did I do wrong?
View 1 Replies
View Related
Jun 14, 2009
i recently bought a vantex nexstar 3 external hard drive with the option of usb and e-sata. The problem i am having is with e-sata. The e-sata is the prefered method of exchanging information dur to its speed rather than usb.
I would like to know from the community in large if there is anyone who has experienced these problems or has connected an external to their m4400 laptop.
The external laptop has a seagate 7200 rpm FFS(free fall sensor) inside.
The problems:
1) When connecting the exHD to the laptop for the first time the HD spins (i can feel it) but then stops. Windows does not pick it up as well as Intel Matrix Storage manager. Only when i restart the laptop still with the exHD connect does windows pick it up as well as Intel Matrix Storage manager.
I did in both cases check to see if the exHD needs more power and it is sufficient.
2)Another issue is that i have windows reporting to me that an external hard drive has been connect to my system even though i havn't plugged it in .....
View 4 Replies
View Related
Jul 5, 2009
I already posted this in the "what notebook should I buy?" forum however, I apologize, and I realize it belongs here.
What is most important for me which ever one causes less heat.
View 10 Replies
View Related
Jul 19, 2007
I purchased SATA 7200 RPM hard drive from newegg.com
[url]
My notebook is the brand-new Inspiron 1720 which only supports SATA.
The problem is that the hard drive didn't come with a "connector" (or "gender changer" or whatever... I don't what's this thing called).
So, I am unable to connect the hard drive to my notebook. I contacted newegg.com and they said it doesn't come with the connector.
Anyone know where I can get this connector?
I tried googling like "SATA connector 2.5-inch drive", but I cannot find any information.... Also, what's this thing called exactly?
View 10 Replies
View Related
Oct 14, 2012
I can't get past BIOS when my W530 is connected to an external hard drive, in my case a WD My Book Essential 3TB (USB 3.0).
Here are some previous threads I've found:
-W520 hangs on boot when a WD SES USB drive is connected
-W520 won't boot with SES device connected to USB
-W530 stuck or won't boot when WD external drive plugged in.
I would be satisfied if I could disable USB Legacy Support in BIOS and move on, but I can't find that option anywhere on my W530.
Here's what I've tried so far:
-Updated BIOS to the latest version (1.11) and updated WD My Book firmware.
-Changed the port (tried both USB 2.0 and 3.0, powered and unpowered) that the drive is connected to.
-Removed everything except my MSATA drive in boot priority. I can't enter BIOS settings when the WD drive is connected so I can't actually exclude it from the boot priority, but I've tried to enable Boot Order Lock.
-Disabled USB options in BIOS (USB UEFI BIOS Support, Always on USB, etc.).Switched between Quick and Diagnostic boot. With Quick it's stuck at the Thinkpad splash screen, with Diagnostic I just get a black screen.
-Tried with both GPT and MBR partitions styles for the external drive.
-Changed between UEFI and Legacy.Tried it with my friend's Thinkpad T520, wouldn't boot either with the drive connected...
Other information:
My Thinkpad is docked to a Thinkpad Mini Dock Plus Series 3 with USB 3.0 (170W). I haven't bothered to try it undocked, but judging from the other posts it's not likely to fix the issue.
Surprisingly I don't have this issue with my older WD My Book Essential Edition 2.0 1TB (USB 2.0) external hard drive. I don't think it would work to simply remove the drive from boot priority. I've removed my other external hard drive but I can still hear it spinning up during boot (when the Thinkpad splash screen shows up), which suggest that it's still being identified during boot. Is there really no workaround other than "get a different enclosure" or "unplug it when powering on"? Are there any >3TB external hard drives, preferably USB 3.0, that are known to work?
View 9 Replies
View Related
Mar 27, 2013
My system (Inspiron 1564 - Windows 7) is still configured as I received it from Dell. The C drive is 58.5 Gb and the D drive is 164 Gb.
The problem is that everything saves to the C drive and nothing uses the D drive.
I do not want to reformat in one drive, happy to keep 2 but want pictures, documents etc to be saved to the D drive as the C drive is getting full up. How do I make the change to point these files to the D drive?
View 3 Replies
View Related
Dec 1, 2014
I think I made a mistake in purchasing my Inspiron 15 without a CD drive. This laptop came with Windows 8 (I hate it) and I would like to install Windows 7 (I love it), but not sure that I can. Forget it. I am not thinking. I just need to attach an external drive.
View 2 Replies
View Related
Dec 31, 2014
having issues with my Dell Latitude E5440. The BIOS does not recognise it, I tested the HD with a external caddy and it works fine. I messed a lot with BIOS thinking it could be a settings but had no luck.
View 8 Replies
View Related
