i recently bought a vantex nexstar 3 external hard drive with the option of usb and e-sata. The problem i am having is with e-sata. The e-sata is the prefered method of exchanging information dur to its speed rather than usb.
I would like to know from the community in large if there is anyone who has experienced these problems or has connected an external to their m4400 laptop.
The external laptop has a seagate 7200 rpm FFS(free fall sensor) inside.
The problems:
1) When connecting the exHD to the laptop for the first time the HD spins (i can feel it) but then stops. Windows does not pick it up as well as Intel Matrix Storage manager. Only when i restart the laptop still with the exHD connect does windows pick it up as well as Intel Matrix Storage manager.
I did in both cases check to see if the exHD needs more power and it is sufficient.
2)Another issue is that i have windows reporting to me that an external hard drive has been connect to my system even though i havn't plugged it in .....
How do I tell what type of hard drive I have in my Inspiron 1520? I am pretty sure it's IDE/ATA, but I am seeing info in my web research that says SATA. Not sure which to buy. Maybe this is a dumb question.
I was checking my hard drive with hdtune and saw something interesting...the program said that my hard drive is SATA I. Am I mistaken or is this for real? I have a CTO VGN-FW490J, got it in June 2009. The hard drive is a Fujitsu MHZ2320BJ. I did a quick google and the descriptions say it is SATA II, so I'm confused. Is it the motherboard that determines the SATA speeds or the hard drive? What's even more confusing is that in the official FW thread, someone said they installed a SSD and they're getting sequential reads at about 250mb/sec so that person definitely is in the SATA II range. I attached an image of the part that shows my hard drive info.
What concerns me is that the model I'm looking at (SR490PBB) states that the interface runs at SATA150 when pretty much everything is set to 3Gb/s. Does anyone know if the hard drive is SATA150
I have a Inspiron M5040 (mid 2011) I ran a system test and was informed that there was a drive critical error with a hard drive ST95032 5AS SATA Disk Device FAILED... What does that mean, is it fixable and how much?
I have a HP 15 Notebook PC with no dvd drive recently I was sent the system recovery cds from HP. I dont have an external dvd drive. What i do have is a Toshiba Satelight laptop with Widows 7 and a good dvd drive. Also I have a 500 GB external hard drive. I was thinking maybe I could copy the disks onto the external harddrive with the Toshiba dvd drive. Then attach the external hard drive to my HP 15 Notebook by usb port and install Hp recovey disks from the external hard drive.
I'm trying to understand the options available for a secondary hard drive on the Precision M4400. When configuring a new M4400, a 'Second Hard Drive' option is shown, but the only options are either a 120GB 5400rpm HD 'E-Module' or 64GB SSD 'E-Module'. It also says the following: Quote:
"Modular secondary storage devices can be used in both the system as well as in an External E-Modular Bay. They do not come with an external E-Modular Bay".
Here are my questions: 1) What does the 'E-Module' after the 120GB HD and 64GB SSD mean? 2) What is the Exterenal E-Modular Bay mentioned? A docking station or similar? 3) Could these options also apply to a Latitude E6500, although not offered directly from Dell?
I have a two month old M4400 with a ST9320423ASG hard-drive that hovers at around 40-41 deg.C (as reported by HDTune) under very light use (basically just Thunderbird and Firefox ).
I'm running Win7Ultimate 64-bit and the power plan is most of the time either on "balanced" or "dell". This is what hdparm says about this drive (excerpt):
Code: Advanced power management level: unknown setting (0x8080) Recommended acoustic management value: 208, current value: 208
I wanted to know whether this temp is considered normal under my described usage conditions and if there's any tweaking that can be done to lower it.
Another bit of interesting information about this drive is that it used to click like crazy when it first came from Dell, until I installed the firmware update in mid Dec. It's been quiet like a mouse since then but I'm wondering if the new firmware could have made it run hotter.
Bought a 2nd harddrive caddy /modular bay for my M4400 laptop,installed the SATA seagate harddrive,but Windows Explorer doesn't show the new harddrive.In my task bar it appears as new hardware.
Something I clicked is making it become a recovery disc for my master drive,which I never wanted in the first place.Just wanted the new drive for additional data
I did some research on the Dell M4400 I ordered a few days ago. I got the minimum amount of Dell memory they would sell me of 1GB. I did the same with the hard drive (80GB/5400RPM) knowing I could get it a lot cheaper on my own.
Hard Drive I've found a hard drive (Fujitsu MHZ2320BJ-G2 320GB 7200 RPM 2.5" SATA 3.0Gb/s Internal Notebook Hard Drive - OEM) and a laptop drive comparison/ review in Laptop Magazine. Here is the hard drive listed above @ $69.00 for 320GB/7200RPM. [url]. I'll try it however I have been a WD guy for my desktop.
Memory I have been pricing DDR2 and DDR3 and found other posts saying DDR3 wasn't worth it and will not work on this forum at this thread HERE and will not work in the M4400 however this review says it will HERE
The memory I found HERE is priced @ $57.99 Crucial 4GB (2 x 2GB) 204-Pin DDR3 SO-DIMM DDR3 1066 (PC3 8500) Dual Channel Kit Laptop Memory Model CT2KIT25664BC1067 - Retail
Quote:
"As a matter of fact the Montevina platform would in general also support DDR3 RAM modules. According to Dell, the standard equipment does not include DDR3 modules, because they still cost much and the availability is still limited while the performance gain of the new chips is rather small. But, they do not exclude that they will offer them later."
I bought my first laptop--an inspirin 17R. I would think in this day and age---being able to boot from USB would be a gimme!
I have a bootable Toshiba Canvio external drive that I have images for restoration stored on. I know you can boot from a dvd drive with a bootable DVD (which I did create) But---if the drive itself is bootable---why does the BIOS not have that option?
What does one have to do in this day to boot from USB?
i want to purchase a external hard drive for my macbook pro that i just purchased. But i do want it to be something like a "Western Digital My Passport" Series (as in a 2.5" or smaller so that it is very portable). I am also interested in getting it with a Firewire 800 port - which is where the problem i am having on finding what i want.
I have a Dell Inspiron E1505. I just reinstalled XP earlier today and now everything is like new again. Unfortunately, my files and movies from my external hardrive are taking too long to transfer onto my computer.
I did one movie at a time and it's taking like 35 minutes to transfer, when before it only took 3 minutes to transfer. Anyone know why this is happening
can I get any external hard drive for my Macbook? Because I see ads for external hard drives for Macs, as if they're specially designed and made for Macs. Is that legit, or can I buy any one I want?
And while we're on the subject - any suggestions as to which one is the best (fastest, most reliable, etc.)?
what would you recommend as a good and reliable external hard drive that I could use with Time Machine.
What do you think of this: Iomega eGo Portable 500 GB External hard drive - 800Mbps(FireWire800)/400Mbps(FireWire)/480Mbps(Hi-Sp.USB)
Also, from friends I know I've heard only complains about external hard drives - problems with reliability etc. Has anything changed in this regard in recently?
Lastly, what is your experience with Time Machine? How much can I trust it?
I have the Beats Special Edition 15-p058n and my USB 3.0 WD My Passport which works fine on 3.0 Windows 7 is connecting and disconnecting continually every 10 seconds or so.
I have checked the internet and found a lot of similar issues so could be a combination of the hardware and Windows 8.1?
I have tried to turn off the power save setting for the usb root hubs in device manager to see if it is the extra power that the usb 3 gives, but this has not worked.
Is it possible to split my external hard disk into two partition? The drive is originally NTFS.. but I'm looking to split it so that the second partition is Mac OS compatible.
My plan is to use Partition Manager in Windows so that I can split the drive without having to lose data. Then plug it back into Mac OSX so that I can format the new partition to a Mac compatible format.
Unfortunately the internal keyboard and mouse on my MBP seem to have packed up for good. Fortunately, I can still use a USB keyboard and mouse.
Is there any way I can copy the entire contents of the hard disk onto an external USB hard disk (everything so that I don't lose desktop icons, filing structure e.t.c.) and then restore it when I get a new machine?
Will the mac pick up any wireless networks? I notice there is an apple brand wireless base, and wasn't sure if that was needed for the wireless to work?
Will any backup external hard drive work with the mac? For example, I have a WD Passport drive that I use with my Dell. Will it be compatible with the mac?
HP G56-122US running Win 7. Bought a replacement 320 GB hard drive due being told by a repair shop that the hard drive had crashed and could not be recovered. Turned out to be the CPU, so I bought a hard drive enclosure so that I could use the new replacement hard drive as an external hard drive. Connected it to the computer and got messages that the software had installed and it was ready for use. Now, if I go to "control panel", click on "devices", it shows that it is installed and operating normally. However, if I try to use it by clicking on an item such as music, document, or a video, and click on "send to", it does not show up as one of the choices. Info that came with the enclosure says it is compatible with Win 7.
I have an Acer Aspire 5750Z notebook which has fallen out with it's best friend the 2TB USB 3.0 Seagate expansion drive. The acer does not want to communicate with the external hard drive and will freeze, crash and stop responding. When the hard drive is not connected, the Acer is quite happy infact it works faster than it did before. Here is a list of the things:
1) I have removed the IDE ATA/ATAPI controllers software. The acer restarted 3 times (to be expected) and reinstalled the missing drivers.
2) I have managed to gain a limited amount of access to the seagate where I partitioned one sector but it crashed again before I have the chance to do the other, and I have been unable to access the seagate since.
3) When I view disk management, I am never able to see the seagate drive sectors E and F but occasionally after running the seagate drive settings software I will see drive E but I am unable to access it.
3) I have checked the device manager for hardware conflicts both with the seagate connected as well disconnected and there are no hardware conflicts
4) I am tempted but not sure if I should flash the BIOS with this BIOS_Acer_1.21_A_A
I've read that e-sata may or may not be powered depending on how the host is designed, does dell's e-sata/usb combo port self-power external 2.5" e-sata drives or do they need their adapters/usb cable used?