Dell :: Using DVI-HDMI Cable To Drive External Monitor
Nov 28, 2008
I am considering a 24" monitor which I need t share as a second on my 1710, as well as the primary on my gaming rig (2X8800GTX SLI).
I want to drive it @ 1920*1200. I don�t want to use the VGA connector for one of the machines, when I do resolution drops to a max of around 1600*1100. So, I am looking at some of the monitors that have DVI and HDMI connectors. The thought was to connect one of the machines via HDMI with a special cable like one from bluejean cable, and use the other straight through, and choose a monitor with an easy one touch toggle between the two.
I read some horror stories that the HDMI link via a DVI-HDMI cable isn't optimal, and someitmes has its own resolution or sync limits. Does anyone know about this?
My other choice is a cheapo DVI switch, but it would be cool just to hit the input button.
I have recently purchased Dell Inspiron 15R 5521N laptop with Windows 8 Pro. When I try to connect my laptop to an Acer monitor with an HDMI cable, it gives me a no signal error. But when the same laptop is connected to a Philips monitor using the same cable, it works perfectly. As usual I thought that the monitor was the culprit, but when I connected another laptop to the Acer monitor using the same cable it worked without any errors. So where does the problem lie. The HDMI cable is OK, the laptop is also OK as also the Acer monitor?
When i turn on the laptop, display doesn't turn on even when external monitor connected via VGA/HDMI.. I hear CPU Fan sound, keyboard lights on, power light on.
My Aspire 5738 is hooked up with AOC brand 27" HDMI external monitor by HDMI cable. This monitor is without any speakers. I made this monitor PRIMARY to 15" Aspire 5738 screen.
When I play a DVD/CD using ROM drive NO SOUND comes out from built-in speakers of Aspire laptop. But picture runs on AOC monitor which is not useful. Aspire 5738 has TWO sound processors in device manager. One is Intel (Default) and other one ReaLTek, both are HD quality.
"How to configure (If Possible) any of the TWO sound processors to HDMI" OR any other practical solutions?
My Aspire 5738 is hooked up with AOC brand 27" HDMI external monitor by HDMI cable. This monitor is without any speakers. I made this monitor PRIMARY to 15" Aspire 5738 screen.
When I play a DVD/CD using ROM drive NO SOUND comes out from built-in speakers of Aspire laptop. But picture runs on AOC monitor which is not useful. Aspire 5738 has TWO sound processors in device manager. One is Intel (Default) and other one ReaLTek, both are HD quality.
"How to configure (If Possible) any of the TWO sound processors to HDMI" OR any other practical solutions?
I recently just purchased and received a fancy Dell e6400 from one of the many dell deals. My eyes are light sensitive from looking at many computer screens over the years and due to this I avoid LCD screens and much prefer flat CRT monitors. My goal is to use the e6400 as my workstation computer while using the VGA out to power my 19in Sony CRT .....
i dissasembled my presario cq60 and when i put it together the monitor won't activate.
i tried using an external monitor and the monitor refused to turn on from standby, a safety feature of the monitor. the small card in the underneath with 2 wires leading 2 the monitor, (i assume that is the laptop version of a graphics card) is fine, inserted properly, and i had a slight issue with the plugs fitting, but that was soon resolved.
im trying to hook up my LCD (LG 720P) with DP to HDMI cable the video is great but there is no audio, ive tried with my friends tv (sony 1080P), audio goes great, im on win7 and th graphics chip is intels GMA windows recognizes my tv but there is no audio
I'm a proud owner of a DELL xps M1730 laptop. Recently I experienced using my laptop on my television screen (LG). However, recently something went wrong. When I try to establish the HDMI connection my laptop won't change it's screen to the television screen.
It changes the resolution on the laptop screen and that's it. When my friend get's here with his xps m1730 it does work for him.
I tried connect a screen trough the DELL quickset but nothing I do seems to help and it is hard to find information on the web concerning this issue. Maybe it is a very easy procedure and I misschanged some of the settings....
I currently have a 13" Unibody Macbook and I'm looking to hook it up to a 32" Sony Bravia LCD.
I am looking to purchase the Monoprice Mini-DP --> DVI dongle and hook that up with my Monster 400 HDMI to DVI cable.
I have the very same cable which I use to connect my HP desktop to my Sony LCD TV.
My only concern right now is what I read about DVI-I versus DVI-D. On the cable's packaging it says "SINGLE-LINK Connection ... For connecting HDMI to DVI components up to 1080i resolution"
I'm looking at the pins on the DVI portion of the cable and its group liked this:
9 pins (3x3) SPACE 9 pins (3x3) SPACE horizontal metallic piece.
The Monoprice adapter and the Apple adapter looks different in terms of the slots which the pins will go through.
I just want to make sure I have right components before I buy the adapter.
I have a Latitide E6500 with the Nividia Quadro NVS160M graphics card. I'm running Vista Business 32bit. My E6500 vid outs are s-vga and displayport. I use my laptop mainly in my home office and I would like some more real estate, when in the office 1440x900 is just not enough. When looking at monitors displayport does not seem a common input but most have HDMI.
I then looked at monoprice and saw two possible options for displayport -> HDMI, an adapter or a cable. What is the difference between the two and which should I use if I want both audio and video signals transmitted? Or am I stuck using a monitor that has a displayport input?
I'm using an Inspiron 1564 and I just tri ed to watch a movie from Internet on my TV
I checked with configuration panel the sound output on HDMI connection, it was activated but not connected and, of course, I got no sound on my TV set.
What did I forget in order to have the sound over HDMI ?
I have a dv6500t computer. I recently bought a 23" lcd monitor (HP w2338h) to go with it. I was using the vga cable that came with it, which works perfectly fine. I then bought a link depot hdmi cable to use to connect my monitor. The cable works fine, but when I restart my computer (with the hdmi cable still plugged in) my computer brings up the blue screen that says my computer was shut down to prevent further damage. But when I take the hdmi cable out, this screen doesn't pop up and shut my computer off. Why does the hdmi cable do this?
Does anyone here own these cables [url], or a different brand? If so, would you care to share what you think about them and if it's better than using the MDP to DVI converter?
I'm thinking about pulling the trigger on these but it seems that this is a new product and there aren't that many reviews yet so I'm still a bit hesitant.
What are your thoughts?
Or if anyone owns the adapter [url] .
Also, I'm seeing that you can't get audio through the adapter for the MBP. If that is the case, would I be able to get audio if I went through the MDP -> DVI ->HDMI route?
How do I connect my laptop to my HD TV with a HDMI cable? I've tried all the suggested routes, checked the TV and cable, but still get a blank screen. Are there updates or drivers I need to install?
I have a Sony Vaio 17 inch full HDMI laptop using Vista. I have been using a HDMI cable connected to my TV for a few months now all working fine yet today for no apparent reason the sound has started coming through my laptop rather than the TV. I have gone to the control panel and tried switching the default sound to the realtec digital however this did not work and I ended up with no sound at all.I have tried two different players both VLC and Zoom player.
I'm trying to connect my Pavilion dv6 to my HDTV using an HDMI cable. I'm getting video, but not audio from the TV speakers. The problem started after I upgraded from Vista to Windows 7. I had no problems with HDMI with windows Vista.
I've tried updating/reinstalling the audio drivers from HP's website, but it doesn't work. I've also tried going to the control panel and changing the playback device, but the HDMI audio device icon no longer appears in the playback devices dialogue box. The only playback devices are Speakers and Dual Headphones, Independent Dual Headphones, and SPDIF (Digital Out Via HP Dock.)
Why is the HDMI device not shown in the playback dialogue box?
I have tried two HDMI cables for 3 year old HP Pavilion g6 to connect with HDTV. Both cause the HP to overheat and shutdown. It worked a year ago but former cable broke. I have dusted by blower underneath. I was trying to watch free movie on HULU. Does not overheat when using otherwise.
I have Inspiron E1705 with WUXGA (1920x1200) which I want to connect to my rear-projection TV that has only component video inputs.
I've bought this S-Video to Component adapter: [url]
But when I switch to external monitor (TV) via Fn-F8, the screen switches to 1024x768 (TV starts showing in that resolution too), and there is no way I can raise the resolution.
But I really want HD 1080i !
I know my TV can support it, as I can switch my XBMC to 1080i and TV switches to it.
I tried to play with PowerStrip options, without much luck.
So for a while now I've been using my laptop while it's plugged into my tv. But the parts of the screen are cut off (the top, left, right and bottom, which doesn't make sense since there is no reason to cut off all sides) I've seen guides telling you how to disable the overscan in the video card settings or in regedit but the thing is, I HAVE NO VIDEO CARD. The guides online assume you have one, but I don't my laptop is as plain as it gets. How can I disable the overscan (if possible)?
I have searched through my tv's settings but have found nohting even remotely related to overscan settings.I have a hp pavilion 15-n221sa running windows 8.1 and I'm trying to get the display to work on a samsung le46b650 tv.
I just got this U530 and wanted to use a dual monitor setup with a monitor that only supports DVI inputs (Samsung SyncMaster BX2335). I bought a cable for the purpose: an HDMI to DVI-D cable. I cannot seem to get the laptop to recognize that there is a monitor attached, however.
Am I going to have to use a port replicator instead or use some sort of USB 3 to DVI setup? I have no other video output options built into this computer.
I connected a dvd drive to my laptop using, a sata to esata cable. my laptop has a ESATA port.
I don't know if you should post some kind of config summary (if yes let me know, I will do it promptly) basically I have a HP DV6t quad edition with an Intel 5 serie chipset, PM55 express chipset (dont really know if it make any sense but still, I will just say state it) so I installed Intel Matrix Storage and when I connect the drive I can see it, but windows 7 does not see it, it's like I didn't plug anything in. [url] also my bios is almost configurable, I don't know why I can change the time, the date, the admin password, the boot order, virtualization, fan on/off that's pretty much it. so what options do I have if I want to make this dvd drive work?
I bought a Roline DP to HDMI cable hoping to be able to watch HD content in my livingroom and not having to plug an extra audio cable as DP should carry sound too.
When I do the same as on the youtube video, I get the following settings in the control panels: [URL] ....
But there's no sound coming out of the TV. I've tried it on my SyncMaster PC/TV Screen and on my Samsung TV in the living room. On the TV in the living room, the windows audio manager shows the device, but it cannot be selected as show above. It stays grey.
I've got a T420s with discrete nVidia Optimus graphics (Quadro NVS4200M). Driver version is 1.2.19.0 for nVidia HD-Audio and 8.17.12.6696 for NVS 4200M. This information comes from the device manager. I installed my system from scratch and used ThinkVantage System Update 4.
Where the problem comes from? I could only imagine that the cable isn't capable of carrying audio, but that seems rather illogic, does it?
i came across the fact that you can only monitor audio if you install the sigmatel audio drivers with XP SP2 compatibility, but now that i wanted to plug my XPS via HDMI to my flatscreen, lo and behold... no HDMI audio as it used to be.
is it possible to have both scenarios or does one cancel the other?
