Dell :: Inspiron 1545 Sata Drive ATA / AHCI
May 25, 2009
got a inspiron 1545 recently with a SATA 320 gb HDD / 4gb ram with Windows Vista Home Basic. Like most of us I hate Vista. So I created a partition & installed XP.
Used a program "EasyBCD" to setup dual boot. I get the dual boot screen at startup. But only XP boots. After a little probing, came to know that there are only 2 options in the BIOS for SATA operations. AHCI & ATA. If I select ATA I can boot only to XP. If I select AHCI then I can boot only into Vista. Searched around but the solutions were a bit over my head. Really appreciate if anybody could come up with something in lay mans terms.
View 10 Replies
ADVERTISEMENT
Aug 31, 2007
I just got my new 1720 Inspiron, and I had a problem when trying to create an image of the C and D drive using the Ultimate Boot CD (BART), it would never see my hard disk partitions. I changed the BIOS setting for the On Board Devices from AHCI (default) to ATA for SATA operation. I also had to change the Flash Cache Module to be disabled, it was enabled in the Factory Default. The result of these changes was good, I was able to see my C and D drive when booting from my Ultimate Boot CD. What these changes do? Should I leave my BIOS at the new setting, or will I lose performance from my hard disk?
View 5 Replies
View Related
Feb 17, 2009
i have Pavilion DV5-1112ea with limited BIOS
i want to change my IDE SATA TO AHCI...
how i can do this ?
View 3 Replies
View Related
Aug 9, 2008
Acer Extensa notebooks usually come with SATA drives. However, my impression is that models with Intel Core 2 Duo CPU's have built-in SATA/AHCI support in Vista, while AMD Athlon 64 X2 models do not:
- Device Manager shows the drive and controller as IDE/ATA, not SATA, even when the drive is SATA;
- there is no option in BIOS (even latest version) for switching from ATA compatibility to SATA/AHCI
It looks like AMD does not support SATA/AHCI, while AMD does not.
View 5 Replies
View Related
Jan 13, 2009
Is the hard drive interface SATA or SATA II?
View 10 Replies
View Related
Jan 11, 2010
How do I tell what type of hard drive I have in my Inspiron 1520? I am pretty sure it's IDE/ATA, but I am seeing info in my web research that says SATA. Not sure which to buy. Maybe this is a dumb question.
View 6 Replies
View Related
Feb 6, 2014
W540 20BG001CGE, had BIOS 1.05 and RAID 1 with two Samsung 840 EVO 1TB working fine under Windows 7 - x64. Did a (by lenovo update tool recommended) BIOS Update with the bios update manager to 2.05. Update ran fine. After Rebooting (and loading defaults, disabling Intel Rapid Start, Changing BIOS boot option to legacy first ... I recognized SATA Option (AHCI or RAID) in BIOS is gone. At boot Intel Matrix Storage Configuration doesnot appear anymore (where you can build RAID etc).
Boot then brings up message "missing operating system".
Downgrade to BIOS 1.05 impossible, due to ISO File on www.lenovo.com support is not system compatible, message "Lenovo Group Limited - Invalid system disk; Replace te disk, and then press any key")
(The link to the ISO File version 1.05 at the bottom of this page links a non bootable ISO image [URL]....)
Also the downgrade to BIOS version 1.08 found here [URL] .... does not work, CD also messages "Lenovo Group Limited - Invalid system disk - Replace ...").
Rewriting BIOS version 2.05 (GNET57WW) does not work (says "BIOS update not necessary").
Embedded Controller Version GMHT25WW (1.10) ME Firmware Version 9.0.22.1467. How to get back my RAID controller?
View 9 Replies
View Related
Jul 19, 2007
I purchased SATA 7200 RPM hard drive from newegg.com
[url]
My notebook is the brand-new Inspiron 1720 which only supports SATA.
The problem is that the hard drive didn't come with a "connector" (or "gender changer" or whatever... I don't what's this thing called).
So, I am unable to connect the hard drive to my notebook. I contacted newegg.com and they said it doesn't come with the connector.
Anyone know where I can get this connector?
I tried googling like "SATA connector 2.5-inch drive", but I cannot find any information.... Also, what's this thing called exactly?
View 10 Replies
View Related
Jan 20, 2015
I have a Inspiron M5040 (mid 2011) I ran a system test and was informed that there was a drive critical error with a hard drive ST95032 5AS SATA Disk Device FAILED... What does that mean, is it fixable and how much?
View 3 Replies
View Related
Jan 30, 2013
My existing hard drive is failing. So I purchased and installed a new hard drive in my laptop. Ran diagnostics. Failed the hard drive "confidence test" and got error reading 4400:011A target not ready. I ran the "device self test" and it passed. The other possible tests "read test" and "verify test" are grayed out probably because the diagnostics/system cannot see the hard drive. At the dos prompt I can access C drive and run its DIR and CHKDSK. So the new drive appears to be physically installed but the computer system does not recognize or identify it.
View 2 Replies
View Related
Jan 4, 2015
I replaced the hard drive on my inspiron 1545 and tried to restore it with the dell data safe disks that I made when I got the machine. Windows 7 loaded but I couldn't do anything with it, It was very slow, I couldn't even get it to update. So I loaded in the windows 7 disk that came with it and now I have windows up and running and updated. My question is what drivers do I need to install. I went to dell/support and entered my service tag number and it came up with a list of drivers (46 of them), some I know I need but others seem to be for things I don't know if I have on the computer. How do I know which ones I need?
Also I read something about a file called Dell System Software but its not on the drivers list. Do I need it or not?
View 4 Replies
View Related
Aug 1, 2012
My hard drive turned bad few days back and i now purchased a new WD3200BPVT 320 GB internal hard drive for my system. I installed it myself after reading all instructions and guidelines. But when i start it, system says, hard drive not found, try to reseat it. I have also reset it, but again same error coming. I dont know whats gone wrong with the hard drive or system..?
View 15 Replies
View Related
Apr 22, 2013
I have a Dell Inspiron 1545 running Windows 7 64 bit SP1. Recently I cloned my old original SATA hard drive for a larger Seagate (600Gb). All is fin apart from no windows update and an annoying request to activate. When i try to update I get a message that my service isn't running and I need to re-boot. It is running and a re-boot makes no difference. In System properties the laptop says it is activated but Windows thinks otherwise.
View 5 Replies
View Related
Nov 5, 2014
Unit powered up fine before, no issue's....worked like a champ until drive failure.
Had a hard drive error code, replaced w/ upgraded 500GB from 320GB. Computers are not my acumen although I found that I can take them apart and put them back together w/o issue-so far. Rebuilt my old Toshiba Satellite 455...new base, top, charger jack, screen, etc..works perfectly! It would be the drive which slides in on the left,, held by two screws, not the disk drive unit.
Powered up fine, than several minutes later powered off. Charger is fine, I replaced the charger jack, still won't power up.
I broke the WLAN white connector, pulled the male end off the board by accident., black OK. It broke when I went to replace the charger port. That wouldn't cause it to not power up though right?
I replaced the complete charger port board, not just the port. Seems something happened after I replaced the new driver card
View 1 Replies
View Related
Dec 8, 2014
My uncle has a Dell Inspiron 1545 with 3Gb RAM, 160 Gb HD and Windows Vista Home Premium. On boot up there is an error message stating that a back up should be performed immediately as the hard drive has a serious problem.
The good news is that I managed to make a clone of the 160 Gb HD to a 1000 Gb HD (Western Digital Blue) using Paragon software before the original drive failed. The bad news is that the cloning process stopped at 42%, but this 42% included the recovery partition and another part of the HD called Dell Utility.
I installed the cloned WD drive and pressed F8 on boot up, but the advanced boot menu did not appear. Instead I get the error message 'no bootable devices'.
I ran the diagnostics program using F5. All the tests were completed and 'passed'. The BIOS recognizes the new drive as 1000 Gb.
Question: how do I boot the laptop? My uncle does not have any recovery media.
View 5 Replies
View Related
Nov 20, 2014
My Recovery E: Folder is full -- 31.9MB free of 14.6GB - Windows Vista. I keep getting pop ups/messages saying that my E: folder is almost full, and occasionally that I should close my internet browser so I don't lose information.
Some of them discussions said to go into the E: folder and delete files which should be there (can't access it the folder -- there's only a warning message) or to change the Drive Letter (get a message that says it cannot remove "the letter drive of your volume", and now I'm not sure what I should do next.
View 1 Replies
View Related
Apr 18, 2013
The hd on my Inspiron 1545 has crashed and subsequently will not boot up. I have purchased a new hd and fitted it.
The recovery disks I have go through the local dell recovery routine but fail on the second disk. I only have the utilities cd from dell no other CDs.
I have windows 7. What I need to restart the laptop?
View 5 Replies
View Related
Mar 8, 2013
I replaced my WD 250GB RPM 5400 with a WD 500GB RPM 7200 and I get a "No boot sector on internal hard drive" "No bootable devices" I have both original disks ( Operating System Windows 7 and Applications.) I've checked the BIOS and it shows the new HDD. I put the Operating System CD in and started the computer than I hit F12 went to CD/DVD and hit enter I received the message "No boot sector on Internal hard drive" "No bootable devices"
View 3 Replies
View Related
Feb 22, 2010
I connected a dvd drive to my laptop using, a sata to esata cable. my laptop has a ESATA port.
I don't know if you should post some kind of config summary (if yes let me know, I will do it promptly) basically I have a HP DV6t quad edition with an Intel 5 serie chipset,
PM55 express chipset (dont really know if it make any sense but still, I will just say state it) so I installed Intel Matrix Storage and when I connect the drive I can see it, but windows 7 does not see it, it's like I didn't plug anything in. [url] also my bios is almost configurable, I don't know why I can change the time, the date, the admin password, the boot order, virtualization, fan on/off that's pretty much it. so what options do I have if I want to make this dvd drive work?
View 10 Replies
View Related
Dec 9, 2013
I installed a Samsung 840EVO 500GB SSD in my Precision M4400 last weekend. I managed to get it working but it only works in ATA mode. All others modes I tried brought me to the windows splash screen quickly followed by a blue screen that flashed so quickly I couldn't read it before the system rebooted. If I let it reboot it continues to do the same thing over and over. As I understand it I would really benefit from the performance AHCI offers, particularly when running multiple programs at once.
How I might get my drive working in AHCI mode?
View 7 Replies
View Related
Jan 7, 2009
Been trying to get all my ducks in a row for when my 1510 arrives, DLing drivers and such.
Been reading some old threads/how tos here on doing a fresh install of Windows XP. It was suggested to put the SATA drivers on a bootable flash drive for installation during the Windows install, so you would be in AHCI mode when finished and not have to try to do it later.
Is that the current method of installing the SATA drivers for AHCI?
View 6 Replies
View Related
Aug 15, 2009
I posted earlier a message about my Vostro 1500 which suddenly won't start. I called Dell and a local repair shop, and both indicate it's most likely the motherboard, and will cost anywhere from $300-$500 to fix.
Just not worth it - I'll get me a new lighter laptop instead. However, read where you can get a hard drive case to get the data off the hard drive and to use as a backup drive
View 7 Replies
View Related
Jun 14, 2009
i recently bought a vantex nexstar 3 external hard drive with the option of usb and e-sata. The problem i am having is with e-sata. The e-sata is the prefered method of exchanging information dur to its speed rather than usb.
I would like to know from the community in large if there is anyone who has experienced these problems or has connected an external to their m4400 laptop.
The external laptop has a seagate 7200 rpm FFS(free fall sensor) inside.
The problems:
1) When connecting the exHD to the laptop for the first time the HD spins (i can feel it) but then stops. Windows does not pick it up as well as Intel Matrix Storage manager. Only when i restart the laptop still with the exHD connect does windows pick it up as well as Intel Matrix Storage manager.
I did in both cases check to see if the exHD needs more power and it is sufficient.
2)Another issue is that i have windows reporting to me that an external hard drive has been connect to my system even though i havn't plugged it in .....
View 4 Replies
View Related
Jul 5, 2009
I already posted this in the "what notebook should I buy?" forum however, I apologize, and I realize it belongs here.
What is most important for me which ever one causes less heat.
View 10 Replies
View Related
Mar 11, 2009
I am having problems with some Blu-Ray DVDs in my DV9774ca with a optiarc BC-5500A ATA.
When I put some Blu-Ray DVDs in the drive starts to spin and makes the normal searching noises for 30 seconds and then it stops without doing anything at all.
I decided to try download a firmware update, but the site says not to flash SATA drives with PATA firmware.
How can I find out what it is? I can only assume its SATA. The firmware I found is for PATA!
Also I assume that the firmware I already have is older than the downloadable version (not from H.P.). The downloadable version is 1.05 from November/08. I bought my laptop in Feb/08.
View 3 Replies
View Related
Jan 10, 2010
2.5" SATA Hard Drive to IDE 44 Pin Adapter For Laptop Drives ....
View 4 Replies
View Related
Jun 15, 2009
My setup is as follows:
Acer 5315-201G08Mi
Intel(R) Celeron(R) CPU 550 @ 2.00GHz (Socket P)
TOSHIBA MK8046GSX
Intel GL960 chipset
IO chip being 82801HBM (ICH8-M).
2G DDR2 533 ram
Vista Home Basic
MB - ICL50
I've noticed that the supplied Toshiba SATA II drive is running in SATA I mode and not SATA II even though the controller chip supports SATA II.
Perhaps the BIOS has disabled SATA II?
In addition, I'm keen to upgrade the CPU to a T7300, I assume if I follow the directions on this site, everything should work fine? Any known problems with this model?
View 7 Replies
View Related
Oct 23, 2009
I was checking my hard drive with hdtune and saw something interesting...the program said that my hard drive is SATA I. Am I mistaken or is this for real? I have a CTO VGN-FW490J, got it in June 2009. The hard drive is a Fujitsu MHZ2320BJ. I did a quick google and the descriptions say it is SATA II, so I'm confused. Is it the motherboard that determines the SATA speeds or the hard drive? What's even more confusing is that in the official FW thread, someone said they installed a SSD and they're getting sequential reads at about 250mb/sec so that person definitely is in the SATA II range. I attached an image of the part that shows my hard drive info.
View 3 Replies
View Related
Jul 18, 2009
What concerns me is that the model I'm looking at (SR490PBB) states that the interface runs at SATA150 when pretty much everything is set to 3Gb/s. Does anyone know if the hard drive is SATA150
View 4 Replies
View Related
Jul 7, 2009
I've tried using the ones from the Dell web site but I cannot get them to work, just incase i'm being a dill can someone link me to the correct AHCI drivers please?
View 4 Replies
View Related
