Dell Inspiron 6400 :: Will Not Read EXE Files
Mar 4, 2013I deleted a file, Google search toolbar, After I deleted it, all my files went to ' lnk ' files...
I tried reloading ' windows xp ' but the computer will not let me.
I deleted a file, Google search toolbar, After I deleted it, all my files went to ' lnk ' files...
I tried reloading ' windows xp ' but the computer will not let me.
I am looking into replacing my old Dell Inspiron 6400, as it has been excellent -I think I should buy another Dell!
I am looking at the new Inspiron 15, which has a 15.6" display.
Can anyone tell me whether the actual laptop itself is bigger or smaller than my current 6400? I am interested in knowing width.
I see a lot of dead space on my 6400, and hopefully Dell realized this, and instead of making another 15.4" with dead space, they made use of this and gave a better display!
can I use any 15,4" lcd panel with 30 pin connection or what other things do I have to consider when buying one
is it important if its a glossy/glare/matt lcd or is it just a matter of taste .......
I have a Dell Inspiron 6400, Intel Centrino Core 2 duo 1.83GHz and Nvidia 7300 GO 128MB.
Current RAM is dual channel interleaved 1024MB total DDR2 SDRAM CAS 5-5-5-15 while in use is 667MHz (memtest+).
Memtest+ reports my FSB to be 166MHz.
I'm looking to get 2GB total memory, I currently have 1GB.
I searched the forums, but haven't been able to get the info I need, which is . . .
1.) What is the maximum ram supported by Inspiron 6400? and what happens if I plugin more than this? currently I have 1g
2.) What type of ram do I get for Inspiron 6400? Which of the following are ok? will all work fine?
a.) SODIMM 1 GB PC-5300/667 MHz DDR2
b.) SODIMM 2 GB PC-5300/667 MHz DDR2
c.) Corsair 2GB DDR3 SODIMM (1066 MHz)...............
I have a Dell Inspiron 6400 that current has a Intel T2400 1.83Ghz (Core Duo) and I'm wondering if anyone has upgrade recommendations for this? Currently I have .99GB Ram so that would probably be okay but any ideas would be appreciated.
Also, anyone know of an online maintenance manual for the Inspiron 6400?
All of a sudden, after some time, when I turned the laptop the screen has become very dim and I can't get it back to normal. I tried Fn+Up but it doesn't work.
My laptop is Dell Inspiron 6400.
The thing is that my aunt started downloading updates and things from Dell (as she told me,
I wasn't there) and in one of those updates, there was the bios, she updated the system, and then it never came back to life...,
so I was wandering if there is a recovery method with a usb floppy drive (I have one),
since I've tried the Windows Key + F and Fn + F with no avail, is there other option, other than replacing the motherboard? (I live in Chile, and here all computer related things are very expensive... and I don't have credit card to order overseas )
I am not a computer wizzard and take all the help you can offer. Here is my problem. On my inspire 6400 the sreen went black. After this happened, I connected an auxilery monitor which worked perfect.
View 9 Replies View RelatedI need to know if I can change the color an Inspiron 6400 (gray to black), using the plastic pieces of a vostro 1000 (black). I think they are the same.
If is possible, i need to know if I just need these parts:
- Dell Vostro 1000 Palmrest and Touchpad DX354 (BLACK)
- Dell Vostro 1000 15.4" LCD Front Bezel Trim PM606 (BLACK)
- Dell Vostro 1000 15.4" LCD Back Cover KT786 (BLACK)
- Dell Vostro 1000 Power Button Hinge Cover HX873 (BLACK)
firstly i thought may be antivirus problm but i uninstall that one.....soooo now again same problm........after 1-2 hours
when i click on the "show hidden icons" in taskbar then the taskbar icon display is veeeery very slow...and overall performance is much much much slow .....
In the forefront we can see the hinge, and in the background we can see the piece behind the hinge (PBTH) - I have no idea what to call it, so from now on it will refer to it as the PBTH. =)
Ok, the problem I've had - for years - is that the PBTH does not stay where it is supposed to stay.. the three plugs do not stay in their holes. This has caused the outer plastic part of the LCD cover to split when I close the lid.
After a few years of this, the bezel cracked on me... so I decide to get a new bezel, and I tried to fix the hinge problem.
I'm not sure what mechanism was used to keep those 3 prongs in their holes, but I was going to try contact cement (for a lack of better ideas) - if you have any other ideas, please let me know.
But now my problem is this:
Last night I glued the PBTH into place, put everything back together..tried close the lid - was met with major resistance - and the glue/PBTH bond broke.
I want to upgrade the ram on an older Inspiron 6400 from 1gb to 2gb. When I look online (including old posts on this site), it seems there are 2 options:
2 x 1GB Module 1024MB-533MHz DDR2-533 PC2-4200, 200p SODIMM; or
2 x 1GB Module 1024MB-667MHz DDR2-667 PC2-5300, 200p SODIMM.
Would my system be compatible with either types of ram? It currently runs 2 x 512MB 533MHZ DDR2-533 PC2-4200 .....
She's been getting a message when she turns it on that the battery has lasted as long as it can last and need to be replaced but she NEVER unplugs the system (
It's a 17" desktop replacement so she can sit in the kitche. (lolstereotypes))
My dad told her that it now wont turn on because the battery final bit the dust but it wont turn on plugged in.
It wont turn on without the battery in it either when it's plugged in. My dad ordered her a new battery she doubts it will fix it
I have a Dell Inspiron 6400 which I bought in the UK new from Dell in April 2007.
The battery is a 9 Cell type (upgraded when bought).
Within the first year it got used on the battery most of the time.
After that it has been plugged in with battery (for backup incase of power outage) about 95% of the time.
Now the power only lasts a few minutes before it totally dies. It charges up to 100% and discharges normally down to roughly 85%. Then this is the strange part, it jumps all the way down to 6% charge .....
I'm currently using a Dell inspiron 6400/E1505 notebook although i wish to upgrade to a studio 15 or 17 i cannot afford it at the moment i can however afford to upgrade the notebook i have a little bit more, the 2 upgrades i'm considering are,
Upgrading the RAM to 2 x 2gb (I spoke to someone on these forums a while ago about it and apparently it is possible) but i'm unsure if its worth it because i can't see anything that'll be different enough to warrant the upgrade .....
Whenever I play any type of game that needs a moving screen or any graphics at all, my screen will just shut off.
No sound comes out of the computer, the backlight isn't on, the screen is just dead.
I've been turning it off by taking out the battery and removing the power plug but haven't tried holding down the power button yet
I have a question. I'm trying to figure out if the inspiron 1505 and the inspiron 6400 have identical keyboards?
basically, i bought a 6400 a few years ago, it's still under warranty. It got stolen not long after i bought it.
I got my GF a 1505 and considering it was so cheap i didn't bother with an extended plan. now her keyboard is having problems.
So, basically i want to know if i can call dell and get them to send me a 6400 keyboard, (because it's under warranty), then put it in the 1505? then just send them the 1505 keyboard back?
My original Dell motherboard recently got fried (smoke, zap noise etc). I ordered a new one from eBay as Dell Canada doesn't sell them. The new one arrived today and I put it all back together.
When trying to power up, the green lights turn on for a couple seconds then goes off and nothing happens. The fan doesn't even power up.
Could it be something I did wrong (I've triple checked everything!), a bad replacement motherboard, or perhaps something else that got fried when the original one died.
Will the LCD from the 6400 fit on a 6000
View 4 Replies View RelatedI DID search but found conflicting information.
I have a Dell here that I just picked up free due to having a busted screen and a bad battery. Luckily I have a HUGE pile of dead laptops and had these parts!
The laptop says Inspiron 6400 on it but the service tag shows up as a E1505 on Dell's site. The service tag is 4Q38YB1 if that helps.
I put two 1gb DDR2-800 sticks in (though it comes up as 533MHz) and a 120gb SATA drive in.
I have an old Inspiron 6400 with Win XP, 80 GB, 2 GB RAM, Intel Core TM2 CPU. I want to install Win 7 Home Premium and use the laptop simply as a standby in case my newer Inspiron 17R 5720 is out of action. Is it possible to upgrade?
I don't care if the performance is sluggish - it's just a standby. It would only be used for emails and internet if my newer Inspiron is down. I used the Service Tag for the 6400 to look at the available drivers. For my Service Tag, the only drivers seem to be for XP or Vista.
Whenever I switch on my Inspiron 6400, either via the On/Off or Media Direct button, the screen almost always goes blank within less than a second. I would like to reset the computer to its original factory settings via F8 or reinstall the operating system via F12 but cannot do so because of the blank screen. Occasionally, I hear the sound which accompanies the window screen a few seconds after switching the computer on; the computer will also sometimes whirr and the number lock and wife symbols will illuminate, all whilst the screen remains blank.
This problem first developed yesterday when I received the message "NTLDR is missing". With a bit of perseverance yesterday, I could eventually get the computer to work by repeatedly switching it on an off, but this no longer seems possible today.My computer has Windows Vista.
I need to reinstall xp on my Dell Inspiron 6400. I don't have any recovery disc or what so ever, only windows xp disc.
The weird thing is that the laptop won't boot from anything but the HD. To format the drive i had it connected externaly to other computer then formatted it from there. I tried using boot selector menu (F12) and selecting cd-rom - nothing happanes.
Also tried booting from bootable usb drive with xp installation on it - nothing happens. Also tried changing boot sequence in BIOS - no affect.
I thought my disc maybe is bad - but i checked in other laptop and it boots great,both from my disc and from my usb flash drive. How to make it boot? Tried resetting the bios to its default.
Also, I thought maybe its sata drivers issues which needs to be slipstreamed onto the windows xp installation - but i hardly think that's it, cause this laptop doesn't even have an option for AHCI mode.
I have a DELL INSPIRON 6400 (aka E1505 in some countries)....with the following configuration:
INTEL C2D T7200 (2 GHz, 667 MHz FSB, 4 MB L2 Cache)
1 GB DDR2 RAM
120 GB HD
Windows XP Pro SP3
Rest basic stuff.
MyHard Drive for Inspiron 6400 died! I am photographer and need to get this running as soon as possible.
It came with a 120GB 5400RPM SATA Hard Drive.
Trying to replace it with a bigger HD.
Not sure what to get.
Would the 7200 rpm be better.
Would the Seagate ST9160411AS Momentus 7200.3 SATA 3Gb/s 160 GB Bulk/OEM Hard Driven work? ...
I've had my trusty Dell Inspiron 6400 since 2006 and it's still going strong, but over the last couple of months
I've noticed that the screen doesn't appear to be as bright as it used to be. It's as if the brightness isn't set to full, but when you try to increase it you discover it is at full brightness.
Can LCD screens become dimmer over time and would a replacement screen fix this?
I have a Inspiron 6400 laptop which has a tru life screen, but it's the shiny type that is more of a mirror than a monitor
I've just upgraded to a latitude 6500 and the wife is having mine but hates the screen, so I need to get a matt finish one..... I guess cheapest place is eBay???
I also want the new screen tosupport a higher resolution, would this mean I need a new gfx card, as I'm sure it uses a intel one built into mobo ....
On new years eve i knocked a glass of wine onto my Dell Inspiron 6400 and immediately unplugged it and removed the battery in order to let it dry out for a bit.
After trying it a few times and the laptop not turning on the battery light began flashing 3 times in red and then nothing still not turning on.
A day or 2 later when i tried it again it this time turned on and was working fine all day (about 12 hours) untill i accidentally pulled out the AC plug in the back and it turned off and now wont switch on at all. When i now press the power button the battery light turns red but doesn't blink and still get no power.
The USB ports can recognize USB mouses and keyboards. However, it will not recognize external HDDs or her Ipod. So far, I've taken the liberty of reformatting her computer but the problem still persist.
I've updated all the drivers to the latest editions and I have tried multiple methods of resetting the USB. (Complete power down of the laptop, Uninstalled the USBs from Device Manager) Does anyone have any suggestions?
Laptop Specs:
Dell Inspiron e1505 (6400)
Windows XP Media Center Edition
Intel Core Duo T2500 2.00Ghz
2GB RAM
100GB HDD
ATI Mobility Radeon x1400
Broadcom 440x 10/100 Integrated Controller
Intel Pro Wireless 3945ABG Wifi
SigmaTell HD Audio