I DID search but found conflicting information.
I have a Dell here that I just picked up free due to having a busted screen and a bad battery. Luckily I have a HUGE pile of dead laptops and had these parts!
The laptop says Inspiron 6400 on it but the service tag shows up as a E1505 on Dell's site. The service tag is 4Q38YB1 if that helps.
I put two 1gb DDR2-800 sticks in (though it comes up as 533MHz) and a 120gb SATA drive in.
I want to upgrade my laptops hard drive. It currently has a Hitachi Travelstar 7200RPM 80GB Hard drive. I want to upgrade to at least 300gb capacity,
preferably not losing out on speed either. Another issue is heat, currently my laptop gets MEGA hot and sometimes even freezes up/slows down (Im pretty sure its because of heat) and I wouldnt want to get a hard drive that runs hotter than the current one.
I dont know whether I need SATA or SATA300, 8MB or 16MB, 2.5" SFF or 2.5"x1/8H. Also, if I got a 5400RPM replacement (effectively downgrading the speed)
would I really notice that much difference ?? I 80% web browse, but the other 20% I video and photo edit and game, and I wouldnt really want to sacrifice performance if it made a big difference.
In the forefront we can see the hinge, and in the background we can see the piece behind the hinge (PBTH) - I have no idea what to call it, so from now on it will refer to it as the PBTH. =)
Ok, the problem I've had - for years - is that the PBTH does not stay where it is supposed to stay.. the three plugs do not stay in their holes. This has caused the outer plastic part of the LCD cover to split when I close the lid.
After a few years of this, the bezel cracked on me... so I decide to get a new bezel, and I tried to fix the hinge problem.
I'm not sure what mechanism was used to keep those 3 prongs in their holes, but I was going to try contact cement (for a lack of better ideas) - if you have any other ideas, please let me know.
But now my problem is this:
Last night I glued the PBTH into place, put everything back together..tried close the lid - was met with major resistance - and the glue/PBTH bond broke.
I'm currently using a Dell inspiron 6400/E1505 notebook although i wish to upgrade to a studio 15 or 17 i cannot afford it at the moment i can however afford to upgrade the notebook i have a little bit more, the 2 upgrades i'm considering are,
Upgrading the RAM to 2 x 2gb (I spoke to someone on these forums a while ago about it and apparently it is possible) but i'm unsure if its worth it because i can't see anything that'll be different enough to warrant the upgrade .....
I have a DELL INSPIRON 6400 (aka E1505 in some countries)....with the following configuration:
INTEL C2D T7200 (2 GHz, 667 MHz FSB, 4 MB L2 Cache)
1 GB DDR2 RAM
120 GB HD
Windows XP Pro SP3
Rest basic stuff.
I've had my trusty Dell Inspiron 6400 since 2006 and it's still going strong, but over the last couple of months
I've noticed that the screen doesn't appear to be as bright as it used to be. It's as if the brightness isn't set to full, but when you try to increase it you discover it is at full brightness.
Can LCD screens become dimmer over time and would a replacement screen fix this?
The USB ports can recognize USB mouses and keyboards. However, it will not recognize external HDDs or her Ipod. So far, I've taken the liberty of reformatting her computer but the problem still persist.
I've updated all the drivers to the latest editions and I have tried multiple methods of resetting the USB. (Complete power down of the laptop, Uninstalled the USBs from Device Manager) Does anyone have any suggestions?
Laptop Specs:
Dell Inspiron e1505 (6400)
Windows XP Media Center Edition
Intel Core Duo T2500 2.00Ghz
2GB RAM
100GB HDD
ATI Mobility Radeon x1400
Broadcom 440x 10/100 Integrated Controller
Intel Pro Wireless 3945ABG Wifi
SigmaTell HD Audio
I haven't been able to connect to LAN (Ethernet) connections since I acquired this laptop, I have installed the correct drivers and tried with different OS but none of them have been a success.
I tried in different Ethernet connections (different houses too) but I still get no internet on my laptop, it recognizes that there's something connected but no internet at all. Since then I have been using a Wireless Router always...
I am looking into replacing my old Dell Inspiron 6400, as it has been excellent -I think I should buy another Dell!
I am looking at the new Inspiron 15, which has a 15.6" display.
Can anyone tell me whether the actual laptop itself is bigger or smaller than my current 6400? I am interested in knowing width.
I see a lot of dead space on my 6400, and hopefully Dell realized this, and instead of making another 15.4" with dead space, they made use of this and gave a better display!
I have a question about 4gb of memory on inspirons. I recently put in 4GB's memory in my inspiron (Corsair brand) and I am running XP(x86) aka 32bit. Windows sees 3.25gb's which is exactly correct.
Awhile back I read that the inspiron motherboard which is an intel, will not run the memory in Dual Channel mode, which will slow the memory down about 3-5%. However I am not sure of how true or not this is. I put the memory and checked my bios and its showing all 4GB's and "Dual Channel" enabled.
So the question is how real is this dual channel concern if the bios is saying its in dual channel mode? PS we are both running the latest bios A17.
I purchased this laptop about 3 years ago and up until a few months ago it was a well capable laptop. Since the original purchase I put 2 gigs of Ram in and a new higher capacity HD and thats about it.
Around a year ago I started noticing the audio skipping on everything. Youtube, all video file types, mp3's and flacs. It didn't really bother me at the time because it was a skip or static sound every several seconds. Now more recently it is once every second and really bothering me.
I searched the forums, but haven't been able to get the info I need, which is . . .
1.) What is the maximum ram supported by Inspiron 6400? and what happens if I plugin more than this? currently I have 1g
2.) What type of ram do I get for Inspiron 6400? Which of the following are ok? will all work fine?
a.) SODIMM 1 GB PC-5300/667 MHz DDR2
b.) SODIMM 2 GB PC-5300/667 MHz DDR2
c.) Corsair 2GB DDR3 SODIMM (1066 MHz)...............
I have an old Inspiron 6400 with Win XP, 80 GB, 2 GB RAM, Intel Core TM2 CPU. I want to install Win 7 Home Premium and use the laptop simply as a standby in case my newer Inspiron 17R 5720 is out of action. Is it possible to upgrade?
I don't care if the performance is sluggish - it's just a standby. It would only be used for emails and internet if my newer Inspiron is down. I used the Service Tag for the 6400 to look at the available drivers. For my Service Tag, the only drivers seem to be for XP or Vista.
I'm running stock 2x 512 mb 533 Mhz ram right now.
I would like to upgrade but I can't find information about my motherboard ANYWHERE. It's not listed on the dell system specs website, either.
So, my question comes down to which would be better:
PC-5300 (667Mhz) ram with 4-4-4-12 timing or PC-6400 ram (800Mhz) with 5-5-5-18 timing?
What is the maximum speed of memory that the e1505 can use? If it's 667 Mhz, I'm of course going to go for the ram with faster timing, but if it's 800 Mhz then I'll go for the speed. I'm using a 2.0 GHz core 2 if it matters, and all I could find it bios is that it's a mm061 "system
I'm getting a used parts computer for my 6400 (both computers are 3 years old) all I know about the computer is "it was dropped and doesn't work anymore" previous user has taken the hard drive and left everything else to me.
The main thing I want to scavange from it is the processor...
I've got the dell service manual for a reference and from what I've researched so far it should be just an easy plug and play replacement.
i'm looking to upgrade the screen of my E1705/9400 from WXGA (1440x900) to WUXGA (1920x1200).
My current screen model is a LG Phillips (LPL0000).
I've found an inspiron 9400 compatible: Samsung WUXGA (LTN170WU-L02)
But i'm not sure if i can upgrade screen from differents manufacturer easy like that.
I've already look over the net but didn't found same situation.
If someone knows something about that kind of upgrade...
is it possible to upgrade an e1505 screen to a led screen so i can save battery life? like say something like this?
http://cgi.ebay.com/NEW-DELL-STUDIO-...lenotsupported
and if so how much battery life would i gain? now since i have an ati x1400 256mb video card i am guessing that i cant go with one that was 1080p or anything right?
I just got another E1505. Built in summer 06. It came with XP MCE and wireless B/G. I have removed the B/G card and replaced it with a Dell NJ449 wireless N card. The Device manager says the card is functioning properly. But, I cannot use the wireless. No signal.
View 4 Replies View Relatedjust wanted to know what are my options for upgrading my W1390 wireless card on my E1505, i want a wireless N but i notice those have 3 wires and mine only have 2, does the laptop comes prewired and maybe the 3rd wires is hidden somewhere or i have to install another antenna,also if is possible to swap what would be my best option
View 10 Replies View Relatedi'm thinking about upgrade my hard drive,
anyone have suggestion on what HD is good for this laptop?
can I use any 15,4" lcd panel with 30 pin connection or what other things do I have to consider when buying one
is it important if its a glossy/glare/matt lcd or is it just a matter of taste .......
I have a Dell Inspiron 6400, Intel Centrino Core 2 duo 1.83GHz and Nvidia 7300 GO 128MB.
Current RAM is dual channel interleaved 1024MB total DDR2 SDRAM CAS 5-5-5-15 while in use is 667MHz (memtest+).
Memtest+ reports my FSB to be 166MHz.
I'm looking to get 2GB total memory, I currently have 1GB.
My Dell Inspiron has a problem, everytime i connect the power supply to charge it while its on the monitor will completely black out on me... Has anyone had or heard of this problem before?
View 10 Replies View RelatedThis is a somewhat new problem but I'll be using the computer for anywhere from 10-30 minutes when I can hear the fans go on and the computer will slow to a crawl.. from like 1.7ghz to something like 900mhz... just slows down really bad. It's got a pentium dual core in it .....
View 5 Replies View RelatedI have a Dell Inspiron 6400 that current has a Intel T2400 1.83Ghz (Core Duo) and I'm wondering if anyone has upgrade recommendations for this? Currently I have .99GB Ram so that would probably be okay but any ideas would be appreciated.
Also, anyone know of an online maintenance manual for the Inspiron 6400?
All of a sudden, after some time, when I turned the laptop the screen has become very dim and I can't get it back to normal. I tried Fn+Up but it doesn't work.
My laptop is Dell Inspiron 6400.
The thing is that my aunt started downloading updates and things from Dell (as she told me,
I wasn't there) and in one of those updates, there was the bios, she updated the system, and then it never came back to life...,
so I was wandering if there is a recovery method with a usb floppy drive (I have one),
since I've tried the Windows Key + F and Fn + F with no avail, is there other option, other than replacing the motherboard? (I live in Chile, and here all computer related things are very expensive... and I don't have credit card to order overseas )
I have E1505 and my battery decided to die today.
I have a simple question. Does anyone tried out those generic 9 cells battery for inspiron 6400 (E1505)? are they any good? most of them (made in China).
I ask this question because they are really cheap (90$ for 9 cells and 60$ for 6 cells) compared to genuine dell batteries (289$ and 160$).
in addition dell genuine batteries for inspiron 6400 are really bad (doesn't last beyond one year), so it is a waste of money to buy these expensive batteries.
My computer has the Intel Pentium T2080 processor. When I talked to Dell, they said that it couldn't be replaced but I noticed that it comes out of its standard PGA478 slot easily.
I would hate to spend the money for a new processor without knowing that it will work, so my question is will a core 2 work? If not, would a Pentium from the T2000 series such as the T2130 (the T2080's closest relative) work?
My issue is that last week I noticed that my touchpad (mouse) moves erratically (shaky), not very smooth when moving around.
I thought it was a virus so I reinstalled windows 7 and installed all the drivers and so fourth .....
