I haven't been able to connect to LAN (Ethernet) connections since I acquired this laptop, I have installed the correct drivers and tried with different OS but none of them have been a success.
I tried in different Ethernet connections (different houses too) but I still get no internet on my laptop, it recognizes that there's something connected but no internet at all. Since then I have been using a Wireless Router always...
In the forefront we can see the hinge, and in the background we can see the piece behind the hinge (PBTH) - I have no idea what to call it, so from now on it will refer to it as the PBTH. =)
Ok, the problem I've had - for years - is that the PBTH does not stay where it is supposed to stay.. the three plugs do not stay in their holes. This has caused the outer plastic part of the LCD cover to split when I close the lid.
After a few years of this, the bezel cracked on me... so I decide to get a new bezel, and I tried to fix the hinge problem.
I'm not sure what mechanism was used to keep those 3 prongs in their holes, but I was going to try contact cement (for a lack of better ideas) - if you have any other ideas, please let me know.
But now my problem is this:
Last night I glued the PBTH into place, put everything back together..tried close the lid - was met with major resistance - and the glue/PBTH bond broke.
I'm currently using a Dell inspiron 6400/E1505 notebook although i wish to upgrade to a studio 15 or 17 i cannot afford it at the moment i can however afford to upgrade the notebook i have a little bit more, the 2 upgrades i'm considering are,
Upgrading the RAM to 2 x 2gb (I spoke to someone on these forums a while ago about it and apparently it is possible) but i'm unsure if its worth it because i can't see anything that'll be different enough to warrant the upgrade .....
I DID search but found conflicting information.
I have a Dell here that I just picked up free due to having a busted screen and a bad battery. Luckily I have a HUGE pile of dead laptops and had these parts!
The laptop says Inspiron 6400 on it but the service tag shows up as a E1505 on Dell's site. The service tag is 4Q38YB1 if that helps.
I put two 1gb DDR2-800 sticks in (though it comes up as 533MHz) and a 120gb SATA drive in.
I have a DELL INSPIRON 6400 (aka E1505 in some countries)....with the following configuration:
INTEL C2D T7200 (2 GHz, 667 MHz FSB, 4 MB L2 Cache)
1 GB DDR2 RAM
120 GB HD
Windows XP Pro SP3
Rest basic stuff.
I've had my trusty Dell Inspiron 6400 since 2006 and it's still going strong, but over the last couple of months
I've noticed that the screen doesn't appear to be as bright as it used to be. It's as if the brightness isn't set to full, but when you try to increase it you discover it is at full brightness.
Can LCD screens become dimmer over time and would a replacement screen fix this?
The USB ports can recognize USB mouses and keyboards. However, it will not recognize external HDDs or her Ipod. So far, I've taken the liberty of reformatting her computer but the problem still persist.
I've updated all the drivers to the latest editions and I have tried multiple methods of resetting the USB. (Complete power down of the laptop, Uninstalled the USBs from Device Manager) Does anyone have any suggestions?
Laptop Specs:
Dell Inspiron e1505 (6400)
Windows XP Media Center Edition
Intel Core Duo T2500 2.00Ghz
2GB RAM
100GB HDD
ATI Mobility Radeon x1400
Broadcom 440x 10/100 Integrated Controller
Intel Pro Wireless 3945ABG Wifi
SigmaTell HD Audio
I want to upgrade my laptops hard drive. It currently has a Hitachi Travelstar 7200RPM 80GB Hard drive. I want to upgrade to at least 300gb capacity,
preferably not losing out on speed either. Another issue is heat, currently my laptop gets MEGA hot and sometimes even freezes up/slows down (Im pretty sure its because of heat) and I wouldnt want to get a hard drive that runs hotter than the current one.
I dont know whether I need SATA or SATA300, 8MB or 16MB, 2.5" SFF or 2.5"x1/8H. Also, if I got a 5400RPM replacement (effectively downgrading the speed)
would I really notice that much difference ?? I 80% web browse, but the other 20% I video and photo edit and game, and I wouldnt really want to sacrifice performance if it made a big difference.
I am looking into replacing my old Dell Inspiron 6400, as it has been excellent -I think I should buy another Dell!
I am looking at the new Inspiron 15, which has a 15.6" display.
Can anyone tell me whether the actual laptop itself is bigger or smaller than my current 6400? I am interested in knowing width.
I see a lot of dead space on my 6400, and hopefully Dell realized this, and instead of making another 15.4" with dead space, they made use of this and gave a better display!
I have a question about 4gb of memory on inspirons. I recently put in 4GB's memory in my inspiron (Corsair brand) and I am running XP(x86) aka 32bit. Windows sees 3.25gb's which is exactly correct.
Awhile back I read that the inspiron motherboard which is an intel, will not run the memory in Dual Channel mode, which will slow the memory down about 3-5%. However I am not sure of how true or not this is. I put the memory and checked my bios and its showing all 4GB's and "Dual Channel" enabled.
So the question is how real is this dual channel concern if the bios is saying its in dual channel mode? PS we are both running the latest bios A17.
I purchased this laptop about 3 years ago and up until a few months ago it was a well capable laptop. Since the original purchase I put 2 gigs of Ram in and a new higher capacity HD and thats about it.
Around a year ago I started noticing the audio skipping on everything. Youtube, all video file types, mp3's and flacs. It didn't really bother me at the time because it was a skip or static sound every several seconds. Now more recently it is once every second and really bothering me.
I have reformatted my old Inspiron 6400 in preperation of selling it, however I used to leave the Bluetooth module turned off the majority of the time when not needed to conserve power.
The module was turned off at the time of the reformat. Since reformatting I cannot get the Bluetooth to work. I can see it in the BIOS and I have loaded the drivers, but it's still failing to work or recognise it
i have a HP 255 G2 Notebook PC that i bought last year. The pc came with windows 8 installed so when i tried to install windows 7 64 bit i noticed the hard drive was GPG encrypted so i had to open the laptop and take out the hdd to reformat it with another computer. That went well. I installed windows 7 but i noticed the ony driver that wont work is the Network Controller driver. I have internet in the computer through a flash usb but now i need to use my wireless internet instead. So i downloaded every driver from my laptop but it wont work so i wonder if the network card is broken. In every network card i've seen on laptops there are to cables connecting the card to the motherboard. One white cable and on black cable but this laptop has only a black cable.
Laptop Model: HP 255 G2 Notebook PC
Network controller IDs:
So my E1505 randomly stopped working on me. I'm thinking the mobo is shot, but thought I would ask everyone here and see if you can shed some light on it.
So basically, the machine just shut off and when I try to turn it on the numlock button lights up, and the caps lock and scroll lock buttons flash. This lasts for about 30 seconds, and then all power shuts off. Nothing comes up on the screen, and it doesn't even sound like it is trying to work. I've checked all connections, reseated/thermal greased CPU, everything I could think of.
Just updated my notebook from XP to 7 (really like it!), and wanted to use a SD card for the ReadyBoost feature.
Have a 4GB SDHC Sandisk:
The built-in reader (RICOH) works fine with standard SD cards, but won't even recognize this one.
Have looked for driver updates, but unable to find anything that works.
Apparently its a common problem on the SXPS 13 where the Ethernet adapter fails to work after the system resumes from sleep. It is caused by the NVIDIA chipset driver.
Can you check if yours is working correctly after the system resumes from Standby or sleep? If so, can you post what OS you are using? Which driver(Win 7 or Dell one)?
Windows 8 was upgraded to Windows 8.1 Upgrade on a Flex 15.
The first time I tried to do the upgrade, I had enough problems that I re-installed from a Windows 8.1 image. All went well and all the drivers work except the Ethernet. The upgrade was relatively painless if you ignore the necessary reboots.
The latest Ethernet driver was downloaded from Lenovo and it was upgraded through Device Manager to version 8.26.218.201
In spite of Device Manager saying the Realtek ethernet adapter is working, no network is recognized by Networks and Sharing Centrewith when an ethernent cable is plugged into the Flex 15 i. The cable is good and has been checked by way of another computer.
I have previously used the hard-wired ethernet once and it worked but I do not remember where the laptop stood during the upgrade path.
This may be a hardware problem which will require mailing the laptop for the repair, or it may be a software / dirver issue. The only other thing I can do is reistall from scratch to confirm it is a hardware problem.
I have an acer aspire 5750z computer, a while back my wifi suddenly stopped working, but the ethernet is fine. I've searched the internet and tried to install the required driver (Atheros), but when I try it says that the "drive might have been ejected please reinsert it now" or something along those lines. When I go to the driver manager the wifi driver isn't even listed under network adapters, oonly the ethernet drver was there. I've heard that if your computer has had a virus or if you had dropped it the wifi card might have been damaged and I wanted to know if that's true, and if so can I buy a new wifi card?
View 4 Replies View RelatedI have a 2014 X1 Carbon (Gen 2) and my ethernet dongle stopped working this morning. It worked fine for the past 3 weeks but after rebooting this morning i can't get to get access to the network via the ethernet port anymore.
The port's activity lights don't light up and a network connection is never recognized.
I have checked the Device Manager and verified that I have the latest drivers (12.11.77.1 for Intel I218-LM), and made sure that the Power Settings do not allow the port to go to sleep. I have also tried 3 different ethernet dongles, all behaving the same way.
I was able to use a USB-to-Ethernet dongle to get access with a ethernet cable. Is my port just dead? I don't see any visible damage, or loose connectors.
I had to format the wife's old Dell Inspiron 5100 and reinstall XP. I did not have the install CD that has all the drivers so I went to the dell website and downloaded all that I needed.
I got everything installed but the hardware manager says I have an "ethernet controller" that does not have a driver. It has a Broadcom network card in it and it says the driver is loaded properly and that the device is functioning correctly .....
can I use any 15,4" lcd panel with 30 pin connection or what other things do I have to consider when buying one
is it important if its a glossy/glare/matt lcd or is it just a matter of taste .......
I have a Dell Inspiron 6400, Intel Centrino Core 2 duo 1.83GHz and Nvidia 7300 GO 128MB.
Current RAM is dual channel interleaved 1024MB total DDR2 SDRAM CAS 5-5-5-15 while in use is 667MHz (memtest+).
Memtest+ reports my FSB to be 166MHz.
I'm looking to get 2GB total memory, I currently have 1GB.
My Dell Inspiron has a problem, everytime i connect the power supply to charge it while its on the monitor will completely black out on me... Has anyone had or heard of this problem before?
View 10 Replies View RelatedThis is a somewhat new problem but I'll be using the computer for anywhere from 10-30 minutes when I can hear the fans go on and the computer will slow to a crawl.. from like 1.7ghz to something like 900mhz... just slows down really bad. It's got a pentium dual core in it .....
View 5 Replies View RelatedI searched the forums, but haven't been able to get the info I need, which is . . .
1.) What is the maximum ram supported by Inspiron 6400? and what happens if I plugin more than this? currently I have 1g
2.) What type of ram do I get for Inspiron 6400? Which of the following are ok? will all work fine?
a.) SODIMM 1 GB PC-5300/667 MHz DDR2
b.) SODIMM 2 GB PC-5300/667 MHz DDR2
c.) Corsair 2GB DDR3 SODIMM (1066 MHz)...............
I have a Dell Inspiron 6400 that current has a Intel T2400 1.83Ghz (Core Duo) and I'm wondering if anyone has upgrade recommendations for this? Currently I have .99GB Ram so that would probably be okay but any ideas would be appreciated.
Also, anyone know of an online maintenance manual for the Inspiron 6400?
All of a sudden, after some time, when I turned the laptop the screen has become very dim and I can't get it back to normal. I tried Fn+Up but it doesn't work.
My laptop is Dell Inspiron 6400.
The thing is that my aunt started downloading updates and things from Dell (as she told me,
I wasn't there) and in one of those updates, there was the bios, she updated the system, and then it never came back to life...,
so I was wandering if there is a recovery method with a usb floppy drive (I have one),
since I've tried the Windows Key + F and Fn + F with no avail, is there other option, other than replacing the motherboard? (I live in Chile, and here all computer related things are very expensive... and I don't have credit card to order overseas )
I have E1505 and my battery decided to die today.
I have a simple question. Does anyone tried out those generic 9 cells battery for inspiron 6400 (E1505)? are they any good? most of them (made in China).
I ask this question because they are really cheap (90$ for 9 cells and 60$ for 6 cells) compared to genuine dell batteries (289$ and 160$).
in addition dell genuine batteries for inspiron 6400 are really bad (doesn't last beyond one year), so it is a waste of money to buy these expensive batteries.
My computer has the Intel Pentium T2080 processor. When I talked to Dell, they said that it couldn't be replaced but I noticed that it comes out of its standard PGA478 slot easily.
I would hate to spend the money for a new processor without knowing that it will work, so my question is will a core 2 work? If not, would a Pentium from the T2000 series such as the T2130 (the T2080's closest relative) work?