Dell :: Precision M6400 & M4400 ; Should The Lid Cover Have Been Thicker And More Rigid ?
Apr 11, 2009On my precision M6400, I can enduce some minor ripples in the LCD by pushing on the lid.
View 10 RepliesOn my precision M6400, I can enduce some minor ripples in the LCD by pushing on the lid.
View 10 Repliesmy big and heavy stapler felt down on top of my M6400 cover, the stapler made of steel and pretty heavy, not even a single scratch on the cover, pretty strong design and build,
View 10 Replies View RelatedWe currently have many Latitude D830s with the D/Dock stations on lease. When the lease runs out on these, I'd like to get some M6400s.
Are there any similar docking stations available? We currently drive 3 external LCD monitors plus use the lid on each, but 1900x1200 on a 15.4" screen is starting to affect my eyes as I feel the effects of age.
The only docks I've found so far are the port replicators and it looks like you can't use the lid with two monitors. We'd be willing to sacrifice one monitor, but not two. We also don't want to switch to desktops due to frequent travel?
i have a dell precision m6400 but the cable from the finger print reader to the motherboard is missing. were do i get this part? forward me some links so i can find it.
View 7 Replies View RelatedCan you do RAID Stripping with e 256 SSD and a 160GB 7200RPM Drive???
View 3 Replies View RelatedWell with the arrival of my second M6400, this one now detailed in my Sig, the first order of buisness was to drop in two 320 GB 7200 RPM drives and my OEM QX9300 CPU.
So open this baby up I did, and this time I took some shots and will add some comments out the process.
Step One.
Remove the Battery, bottom Base assembly cover, and hard drives.
Step Two.
Remove laptop LED Cover (Bezel) - this requires some care as the power on cable is connected on the underside of the bezel right by the power button.
Also if you have the finger print reader there is a very small ribbon cable that has to be disconnected - carefully, From this exeperiance I suggest placing the bezel at the top of the laptop and after removing the keyboard disconnect the ribbon cable from the main board - it was much easier to reconnect this way, and I dam near broke the small connector on the bezel end.
Step three.
Remove the 4 screws for the keyboard and slide the keyboard upwards toward the screen to disconnect it from the laptop.
Step four.
Flip the laptop over and remove the four m2.5 x 8 mm screws .....
It appears that Dell just removed the option for Intel wireless cards on the M6400... The Dell branded cards are now the only option...
View 9 Replies View RelatedWere do I get parts for my dell precision m6400?
I need four things.
Web Cam
Both Hard Drive cages
Second Hard Drive Sata Cable
I know this is probably a dumb question but can the Precision M6400 with a QX9300 be overclocked?
View 6 Replies View Relatedcan some one tell me were the driver is for the on screen display for the brightness and volume? You know when you press the volume key it shows it on the screen.
View 3 Replies View Relatedso have the option of purchasing the M6400 fully kitted out with the FX3700M which is basically a 9800GTXM.
System is quad-core, 8gb of ram and similiar to my current XPS in HD space etc. However I have 8800GTX sli'ed. I know SLI really only gives me about 20-50%
First Impressions:
Was a little underwhelmed when first opened the box, in part because it looks like a gray laptop - nothing special. Once hefted out (yes tis a bit on the heavy side) began to realise how solid this thing is.
The base is one solid chunk of alloy - built like a tank where is the E1705 has a alloy base this is this is twice as thick. Booted it up and found they had a new installation of Vista Business 64 bit - had a bit of a play then thought time to play with Windows 7 64 bit .....
Well i have had my Dell Precision M6400 for about two weeks and i want to do a comprehensive review (with video) as part of my school project.
I am studying multimedia Technology and Design and I am just in my second year. So my skill level is still as good as average. We were tasked to create a website portfolio and market both ours and our partners.
Am still in the process of apply finishing touches to the site(it isnt live yet) and after much deliberation about my marketing strategy. I have decided to use the video/written review as part of my means to promote my site and draw in my audience.
My Dell Precision M6400 came with the following configuration: ...
What is the Broadcom USH? Its showing it not installed in my deivce manager on my dell precision m6400.
View 6 Replies View RelatedI am considering of getting myself a laptop for personal CAD and design use.
I am looking to buy a resonably priced Quadro graphic laptop and hope it last for 2 years or so...
Could anyone kindly advise me on if the Dell Precision M4400 would be a good option? (below is the spec I am thinking of going for)
Processor: 2.8Ghz T9600 Intel Core 2 Duo
Memory: 4Gb (800Mhz, DDR2)
Graphics Card: NVIDIA Quadro FX1700M (512Mb)
Hard Disk: 320Gb (7200rpm)
just got my m4400 and upgraded to vista business via the dell disks. Now the backlit keyboard dosen't work. It was working under XP. It on in the BIOS and the controlpoint.
View 10 Replies View RelatedDell is now offering a Blu-Ray disc drive option on the Precision M4400!
Here's the link to the M4400.
(note: I posted this in the XPS/Studio section, and I'm reposting it here since it pertains to both)
I am looking for a notebook for my girlfriend. She studies architecture, so she needs something with a powerful GPU, high resolution display, but not too heavy (she has to lug it with her every day all over campus). We don't want to spend more than ~$1500, and hopefully get it for less than that with discounts (either through the University or her mother's job) .....
Ive been hunting around for a laptop for a couple of months now and ive still not decided what to get lol, i was initially drawn to the M17x but here in the uk we seem to be paying well over the odds for one compared to the US.
I was looking on ebay earlier and i came across a couple of Dell Precision M6400 laptops with what looks like a huge spec for a decent price, they seemed to offer more value than the M17x at their respective prices.
Now what i need to know is what is the difference between a Precision M6400 and a Precision M6400 Covet ?
How well regarded is a Precision M6400, is it known as a gaming laptop as ive not come across them before.
This is the spec i was looking at, how would this compare against an M17x, how well regarded is the processor and graphics card and the spec in general? ...
Has anyone been able to get i8kfan installed on a M6400 with win7 64 bit?..
I get a error just saying fanio driver has failed to install. I only just got this machine and it is hotter than my M1730....
I've searched for some answers to this, but have been unsuccessful...
I've got a Dell Precision M6400, and would like to be able to use it on an upcoming trans-Pacific flight.
Does anyone have experience with an airplane adaptor which would work with the M6400?
I have a dell precision m6400 but i dont have the intel 5300 card.
in this system the 5300 can only be used because its half the size and thats what is allowed in the computer.
you cant even try and fit a normal size one. my question is can i install a normal one in the wwan slot?
I'm deciding between the HP 8730w or the Dell M6400, and was wondering how solid the laptop feels, and if the early software quirks (like the sound breakage) have been resolved?
View 3 Replies View RelatedOrdered a M6400 today. Estimated ship date 10/23!
X9100 3.06ghz (Rather have raw speed then extra cores - next question - can it be overclocked?)
4GB (2 DIMM) 1066mhz
nVidia 3700m (Yeah!)
1440x900 WXGA
Dual 80GB hard drives (have my own 320's ready to go in)
Backlit keyboard (Standard)
Intel 5300
Bluetooth 370
Fingerprint Reader
Extra AC adapter (210w!
If you are, can you tell me wht model of Blu ray drive is installed?
Been looking into getting one,
It seems 9.5 mm high Sata Blu Ray drives do not exisit out there
Anyone have a XP 64 bit install guide for precision M6400 ?
What dell utilities should I install ?
anyone added 4x2GB dimms into this machine and how did it go was it full stable etc ?
View 3 Replies View RelatedPrecision M6400 : Is it possible to put the GPU (2700M) into a low power mode ?
Often, when I'm on battery, I do low GPu work, like text editing and compilation, or giving presentations. Also I use XP 64 bit; all low GPU work.
Can I downclock the GPU or undervolt it or do something to conserve energy ?
I want to get a durable work station notebook and narrowed down my choices to the Precision M4400, HP Elite Book and Thinkpad W500.
Getting the Precision from the Outlet seems the cheapest option. Anyone have any experience getting a laptop from there?
I'm a bit out of the loop. Is the M4400 due for a major refresh any time soon? If so when, and what major components will be replaced (gpu, hopefully)?
View 9 Replies View Related