Dell :: RAID On M1730
Jun 26, 2009Can anyone please tell me if it's possible to setup a RAID 1 from an existing HD and a new HD (same size)?
I don't want to reformat just to get the RAID setup. I want to keep what I have, but have redundancy..
ADVERTISEMENT
Dell :: M1730 RAID Setup Windows 7
Jun 15, 2009Not sure how exactly to get RAID setup - I've never set it up myself. Could anyone explain how to set up your computer in RAID in Vista/
View 5 Replies View RelatedDell :: M1730 Odd Drive Configuration RAID 0
Feb 5, 2008This is a weird one, my new M1730 has RAID 0 2x160GB but they are different makes of hard drive:
Hard Drive Member 1: Hitachi HTS722016K9A300
Hard Drive Member 2: FUJITSU MHW2160BJ G2
If you are an M1730 owner I would be interested in what drives you have. Dell have tried to fob me off and told me all M1730 have this config.
Although it works OK I can't see that this is good practice - I would have expected matched drives.
Dell :: [E6500][esata][RAID Port Multiplier] Raid 1 Enclosure Not Regnosized Using The Esata Port
Mar 5, 2009Here's my story and, let's say, my analysis:
I bought a generic 2 HD sata2 RAID1 enclosure based on the chipset Silicon Image SteelVine 5744. It can be used in USB or eSATA2. This embedded chipset (named SiL5744) is known (understand "claimed") to auto-handle Sata I/II and host sata2 controllers that not support the port multiplier feature. The HD are two Samsung F1 1To. There's no jumper to rollback to SATA 1.5Go on them, you can only do it by flashing the HD's bios, however we don't need to do it as I wrote just before, the SiL5744 supports SATA 3Go natively.
The enclosure works pretty well with USB, but *not* in eSATA : the E6500 freezes/hangs just after the POST step (a potential driver issue with the installed vista 64bits is not the reason then). As soon has I disconnect the eSATA cable, the system recovers and continues as normal.
What I've tried/done so far :
Both E6500's BIOS SATA mode AHCI and IRRT mode were tested,
Intel Matrix driver and software was updated to the latest 8.7.0.1007 version (AHCI and IRRT),
The SiL5744 chip was upgraded to its latest firmware as well (in case of...)
In order to verify the esata cable, the HDs and the enclosure itself, I succeed to :
- Use the enclosure's RAID1 feature when using the USB connection, I could partition,format, and read/write on the logical volume
- directly connect *one* HD (Samsung F1 1To) to the E6500's esata port -(I have a sata2esata cable), Vista installed it and I was able to use it as normal, even the hotswap feature seemed to work fine (I unkindly removed it). I could so test both HD individually this way... On the enclosure hardware side, everything looks fine then.
An IMPORTANT thing : The E6500's ICH8/9-M sata host controller seems to support the Port Multiplier feature *ONLY* on sata port 0 -as a bubble message from the Intel Matrix soft sometimes shows up-, but this is exactly where the internal HD is plugged on the motherboard I found nowhere you can change the internal sata port ID (switch,bios,ect...). I think this is the key of the problem that seems to be a dumb port conflict, because the esata port is in fact the port sata 4 (the DVDRW drive is sata 1, dock's esata is 5 for instance). If somebody knows how to swap the sata port ID, I think I won't be toasted !
Dell :: RAID 0 Failing
May 6, 2008Got my XPS 1730 today and as soon as windows booted, the first message I got was that a RAID 0 drive was failing and I needed to back it up immediately. Does this mean anything? Do I have a defective part?
View 15 Replies View RelatedDell :: M6400 Raid 0 Backup
Jul 1, 2009I tried to backup my M6400 with Acronis. The backup works fine, but I'm not able to restore ....
View 8 Replies View RelatedDell :: Precision M6400 RAID
Jun 23, 2009Can you do RAID Stripping with e 256 SSD and a 160GB 7200RPM Drive???
View 3 Replies View RelatedDell :: Studio 17 Raid Driver
Mar 5, 2009I have a Dell Studio 17, with vista.
I want to be able to dual boot with XP, but am needing a raid driver.
I have installed XP on a partition on the hard drive but if I want to boot up XP I have to change the option in the bios, which does get a bit of a pain.
Dell :: RAID V.s Dual And Quad Core
Feb 14, 2008I've seen a number of rescent posts where folks are still setting up RAID platforms even though dual core and now quad core processors are becoming mainstream.Is it the additional chipset that you demand or what is it that requires the additional hp you seek? there is no game out there I cannot play without it and short of CAD I see little use other than proffesional requirements (NIMBUS 2.1 or Zach, perhaps).
View 14 Replies View RelatedDell :: Whats Faster 120GB SSD Or Raid ZERO
Oct 27, 2008Picked up a great deal on a 1730 with a 128SSD and 320 2nd drive - Does anyone know if the 120 will be faster than if I were to go with 2 7200 rpm drives? The price difference for the SSD is "UP THERE" so I at least want to know if its as fast as a conventional 2 hard drive raid zero approach.
Also does anyone have any links to spec's for the Dell 128SSD? Is it the Memoright 128GB.
Dell :: It's RAID 0 Configuration Effective For SDD Drives ?
Mar 5, 2009I've noticed the improvements are relevant but not as big as I expected, I think with normal HD the RAID0 performance will be much better than a single HD drive, any experience using SSD in RAID0 configuration
View 7 Replies View RelatedDell :: RAID :: Connecting An Extra Monitor
Feb 23, 2009Possibly off topic, but it is related to a Dell Precision (workstation..)
A message that you don't want to see on your main file server..."TERMINAL DISK FAILURE"...
Happily, I just pull the borked disk out and stick in a spare (of the wrong capacity, but hey...) whilst awaiting the arrival of a replacement...and all is well
Dell Studio 1749 :: RAID Controller Or Not?
Apr 18, 2013I have a Dell 1749 into which I have installed two OCZ Vertex 3 MaxIOPS SSD drives. Boot times are pretty fast using a single, non-raid, drive but I was thinking of configuring the two drives in a RAID 0 configuration to boost speed a bit further. I could not find anything in the bios settings that would allow the SATA controller to go to a RAID configuration. I guess, therefore, that at least the laptop that I have does not have RAID capabilities. Were there any Studio 1749 system boards that did indeed support RAID?
View 4 Replies View RelatedDell :: Is Vista's Defrag Tool RAID 0 Compatible
May 4, 2008I'm going RAID 0 with my new 1730, and will be going 2 X 160GB in RAID 0.
The question is will windows defrag tool, know how to properly handle the 1/2 and 1/2 file fragments on both drives?
I would assume that it would, by simply moving a fragment and it's assosiated 1/2 on the other drive to the same spot on both disks? Or would it not?
If it's not, what defrag tools are RAID 0 compatible?
A serious question when you consider VISTA's "advanced" or more correctly "complicated" page/swap file use and RAID 0. The way I see it, is under defragmentation a raid configuration could be realy hurt by fragmentation as you effectively double the normal rate of fragmentation in a RAID configuration.
Dell :: How To Get RAID 0 Working In M1710 And E1705 Instructions
Jan 29, 2008First have 2 drives of course. main drive and a Optical 2 SATA or PATA.
my howto is for a 320 and a 250 raided giving you 250/250 =465 real gb of space.
first partition the 320 drive when installing XP PRO so that you have your main partition 70gb and the rest leave for later. also just leave the other drive for later as well.
Install windows XP pro on the 70gb partition.
get your drivers etc programs etc and all other shit that you want setup.
next hack the registry to enable Dynamic Drives on XP-PRO. Funny cuz they say that you can't get dynamic drives on notebooks. not even with XP PRO.
go into :
HKEY_LOCAL_MACHINESystemCurrentControlSetServices
and change the following
.
in the services dir there is each reg dir and the corresponding start value.
you must change the start value to whats below.
dmadmin: 3
dmboot: 4
dmio: 0
dmload: 0
dmserver: 2
after that reboot.
then go into control panel, admin tools, computer management and then disk management.
right click on the windows drive and click on convert to dynamic.
it will pop up with a list of drives you have *2 of course cuz thats all we have* so check the other drive. and convert to dynamic. just say ok to the next few things it asks you. and reboot.
after reboot go back into disk management and right click on the second partition in the windows drive and click "new volume" and choose stripped in the list for what kind of volume. click next until format and do a quick format.
bingo you just created a raid 0 drive which will not be redundant but will be UBER QUICK.
mine has a 8ms response time.
sorry for my crappy howto. but I really wanted raid in my notebook and there was no howto's so it took alot of digging.
Dell :: Precision M6400SSD RAID 0 (solid State)
Mar 13, 2009Anyone using SSD's in the M6400 in RAID 0?
I'm trying to figure all this stuff out until my M6400 arrives. By creating this thread I hope others can benefit from this instead of searching and reading 100's of pages...
Since prices have dropped and they are more affordable now some will want to explore this options but not everyone is aware of advantages/disadvantages, benefit .....
Sony :: AW Raid
May 29, 2009I purchased a Sony AW230J/H believing it would be easy to convert to a RAID 0 array by installing my 2 Intel SSD drives. Turns out on this particular model they turned the RAID options off in the BIOS so I can't access it, and install a NON-RAID version of Intel Storage! But, striping/mirroring are available in the native VISTA Storage of Manage Computer! So, how can I create a RAID on drives that are already being used to boot into the OS? Or does anyone know any tricks to turn ON the RAID Bios so I can configure it PRE-OS installation? When I right click on the 2nd SSD (unpartiioned) all options for mirrow/striping/etc are available, but no drives to add to it. My primary drive has those items greyed out?
View 9 Replies View RelatedApple :: RAID 0 On My PB
Apr 27, 2009I have got 2 HDDs in my PB12". If I do a RAID0 using Tiger, would I get a performance hit instead of getting more speed from the HDDs?
View 10 Replies View RelatedSony :: Raid 0 On Vaio Z
Aug 30, 2009I'm about to take the plunge and order the vaio z from sonystyle uk, i was looking for the fastest, reasonably portable with good resolution laptop, and while I was looking for screen little bit bigger than the vaio z (15"-16") I couldn't really find anything that would go as fast the vaio z while still being under 17" and light enough to carry around.
But all my searching was based on the fact that I want to raid 0 two fast SSDs.
But is it really worth it? will two x18-Ms in Raid0 on the vaio z raid controller be really faster than one x25-M?
Also is it possible to DIY the raid? I did some reading and while I found some threads talking about the parts used to do the raid i couldn't get a clear answer whether it's easy to do the raid yourself.
One other question is that on sonysyle uk you have the most expensive vaio z having the carbon fibre option, while anything cheaper doesn't say so, does that mean the others are not carbon fibre? how different would a carbon fibre vaio z be VS non carbon fibre?
HP/Compaq :: RAID 0 On My New HDX18
Feb 1, 2009I bought a HDX 18 here in the UK, it came specced with 2 x 250GB HDD's...
I'd have liked to run them in a RAID 0 config but not sure if I can? I know that in the US you were given the option of RAID HDD's?
Sony :: Is The Quad Raid 0 Ssd On The Z The Fastest
Apr 14, 2010Is the quad raid 0 512Gb on the Z the fastest setup in the laptop/mobile world?
How does it compare to the 512GB SSD setup on the new MBP or even the Alienware 15x and 17x?
I asked this on the Alienware forum; but nobody truly knows much other than that the alienware would demolish the Z and that the ssd on the Z is a dual setup like the mbp and alienware. I know its a quad setup, but is it the fastest option availble?
I was under the impression tht it was, and it would be extraordinary on such a tiny laptop.
Sony :: Z Series SSD And RAID/TRIM
Mar 8, 2010Does anybody know if the SSDs on the Z series use the slower MLC flash memory or do they use the more efficient (and expensive) SLC flash memory?
View 10 Replies View RelatedSony :: One Drive Raid 0 With New Z1190
Mar 11, 2010I'm thinking of purchasing the new sony Z-1190 laptop. Some of the options have only one drive (say 128GB X 1, or 256 X 1) but still supposedly have raid 0. How is this possible (I thought that more than one drive was needed)? Would there be a performance difference between the 256X1 or the 192 (64X1 + 128X1)?
View 10 Replies View RelatedSony :: Z Raid Cable And Bracket
Aug 27, 2009Im looking to buy the raid cable and bracket for my Z. I've seen old threads and saw that the raid cable is FCP-126, but does anyone know the model number for the bracket?
View 3 Replies View RelatedDell Latitude E6410 :: BIOS Locked - How To Turn Off RAID And Activate AHCI
Jan 25, 2015I am trying to install a hybrid HDD with solid state and a mechanical back-up. The SSD portion works but I can't run the HDD utilities to turn on the mechanical drive portion. I need to turn off RAID and activate AHCI (Advanced Host Controller Interface) for HDD's in the Bios settings. It would also be nice to update my bios as the revisions come out. I need to override the Password...
View 1 Replies View RelatedSony :: Z Series With 320G SSD Raid 0 Upgrade
Feb 4, 2010I was browsing at an online store today and I see that Intel has released 1.8" 160GB drives! These are 5mm thick.
Now I have upgraded my Z to a single 160G (2.5") but these should slip right in!
Does anyone know where I can get the required cable and the tray for the z-series notebooks
Sony :: Vaio VPC-Z1 (HDD Option): Custom RAID
Apr 25, 2010I've got the HDD option, which replaces the optical drive with a normal HDD, and doesn't come with proprietary Sony SSDs. I've been thinking about and testing RAID configurations, and this thread is meant to gather some thoughts on that. At some level it's probably easier to go the Sony SSD route, but... I prefer something else
There are two parts: (1) external RAID, (2) internal RAID.
Part 1: External RAID
I went down this path because I believed that there's only one SATA port offered by the HDD-option. From Intel [url], it appears that the port multiplier functionality is not implemented in the ICH8, which is what the Z1 comes with. This means we can't get two or more drives to logically share the same SATA port, which means that they have to appear as one logical device, which in turn means that some sort of external RAID/BIG hardware is needed.
I tried a number of hardware RAID solutions. The first was the Silicon Image SiI 4726, in a mini-board with a form between the 2.5" and 1.8" drives. Unfortunately, after configuration on a (old) desktop, the chip offers only its admin drive ("Config") to the bios and Windows, rendering it impossible to boot off of...........
Sony :: Vaio Zdual Vs Tri Vs Quad Ssd Raid 0
Mar 21, 2010how much faster are the tri and quad raid configurations compared to dual raid? I know bench tests show that the tri and quad raid are significantly faster but how does this translate into real world use? will opening programs be twice as fast or games will load twice as fast?
View 3 Replies View RelatedHP/Compaq :: Envy Owners: Raid Using HD 7200rpm
Dec 21, 2009I know that Envy 15 has the ability to use RAID using the Dual SSD option:
From HP website:
Versatile storage options include the ability to add two solid-state drives in a RAID-0 configuration to improve the overall speed of the ENVY 15 while providing excellent disk performance.
Now my question:
It's possible to use RAID 0 using two HD 7200rpm?
The default one comes with 500GB Seagate then I'll buy another one of this + the hd caddy and cable to install it.
Sony :: TT RAID Failed Keyboard Destroyed What Happened
May 4, 2010My RAID failed yesterday and one of the new drives I bought is dead. I only had it for less than a day.
I don't know if it is was the drive or RAID but either way the drive does not work but the connector does so.
I'm most likely going to send a ram module I bought back as I’m unsure the voltages of that ram.
My keyboard also developed a problem. Not all the keys work. I looked at it and the connector is burnt the middle of it. The keyboard connector is what goes into the sound board. I'm not 100% certain how it happened may be it was either the ram or RAID that did that or some other unrelated fluke caused by something else. I kept on powering of and on without logging of in test mode and may be that did it. I'm not a smoker and I never physically did that.
The ram I originally had was 7-10-F1 the ram I bought was a 4GB 7-10-F2. I think what has confused me is that I googled and read that the ram I bought was CL8 when I had originally CL7 it makes no sense to me to me that ram could be CL8 when the first letter is C7?
I put my laptop on my desk like I normally do and it just turned off. I powered it on and it said no OS found. I opened it and the connector looked fine and the KB was ok at that point..................