I installed windows 7 ultimate today on my studio 1737. I first as always install the dell drivers and update windows.
I was told by a dell tech to flash the bios. When I did this, the bios froze right near the end of being complete. I waited for about 15 mins and nothing, not even the mouse moves.
So I pressed the power button and hold it for about 10 seconds and nothing. The only thing left for me to do was to pull the power cord and the batterie so the computer will turn off which of course did happen.
I have a Dell studio 1737. And my screen won't trun on when both Ram sticks are in, when I put one ob the bottom slot the computer boots up perfectly. When I take the bottom one out a place I. The top ram slot it doesnt boot up.
I have been asked to attempt to recover a friends Studio 11737 Laptop. When you plug in the AC Power you get a white power light and then about 30 seconds late you get a amber blink 4 times and then a whiter light. The system will not power up to run any Diagnostics. What these indicators mean?
I got a brand new Studio 1737 for my 18th Birthday in July, since then I've noticed that the screen often blurs and goes fuzzy when running applications that require even the most basic graphics (Solitare for example).
I called Dell, and they picked up the laptop, only to return it a week later saying nothing was wrong with it. Its still blurry.
Since then, I've installed Windows XP, Vista, 7, and even Linux (Xubuntu and Ubuntu). XP, and both Linux work fine, but Vista and 7 dont. its getting really frustrating. Any ideas of what to do?
I have a Dell Studio 1737 that is having problems shutting down. While it's running; if I tilt the screen slightly the power light will flicker on and off and the laptop shuts down completely. When I tilt the screen again, the laptop will power back on and start booting up without having to press the power button. I have all the power settings set to never and set the laptop to do nothing when I close the lid. Seems to be a short in a power cable somewhere in the screen? Running Vista 64 SP2. This laptop is a month out of warranty. Does the whole screen have to be replaced or can the power system be replaced?? Haven't opened it up yet to see how the power system is set in the bottom of the screen.
had a Dell 1735..screen resolution was perfect and webpages i visited looked nice and sharp etc...purchased a new Dell studio 1737 laptop and it seems that the default setting is 1920 x 1200..this makes everything very sharp but to small to work with...the correct setting for the correct size etc...seems to be 1440 x 900..but when i change the settings to this size everything is the correct size but not as sharp...and websites i visit such as Facebook etc..the text on these pages seems different..now, when I place my old Dell studio 1735 beside my new Dell studio 1737 my old laptop which is set at 1440 x 900..my old laptop looks far sharper and superior to my new laptop! My old 1735 has the highest setting for resolution at 1440 x 900 while the new 1737 seems to have a higher setting option of 1920 x 1200. Is there a big difference between the 1735 and 1737? Am I stuck with just keeping my setting on my new 1737 at 1440 x 900 and putting up with the blurriness etc? Have tried everything from going into Catalyst center to adjusting settings in appearance in vista etc..
Hello i recently received a dell studio 1737 for Christmas and about every couple weeks the screen acts weird,
its like a bunch of green pixels just start appearing all over the screen and wont go away until i either close the laptop or restart. After I do that it will go away for a couple weeks and then it will happen again.
I've been trying to just ignore it and keep thinking it will go away but idk. Has anyone else had this problem and what could it be?
I have a Dell Studio Laptop, Model PP39LThe laptop has a fully charged battery and is plugged in. The Led on the battery plug (going into the computer) lights blue.When I press the power button the screen will flash white for a second and then nothing (no beeps either). The little white led on the computer by the power jack will light up white for a second and then turn off as well.This has happened in the past but it just worked after leaving it alone for a few hours.
I haven't turned the laptop off since this incident. I've been putting it in stand by/ sleep mode and everything was fine. I was also able to restart the computer with no problems. It's just when I power down when this happens.The keyboard recently froze (new issue) and I had no choice but to reboot by powering down. Now it won't turn on. I have never spilled anything on the laptop. Nor have I dropped it or caused any other damage to it. I'm thinking it might be a problem with the motherboard.
I got the "ATI display driver has stopped responding and has recovered from an error" several times over the last couple of days where my screen would freeze for a couple of second and then start working again and would display that message. I thought little of it as it did always seem to work afterwards.
Last night however it got extremely frequent happening at least once a minute and i decided to try and restart my computer to see if that would work. Now when I try to turn the computer on the screen stays black and will not do anything. I can hear that the computer trying to work as the fans are going and the power light is on, it's just the screen that isn't working.
I found these guides on how to fix the error message but at the moment both are no good as I can't even use my computer to fix the problem as the screen won't work.
I am pretty sure the reason my computer is doing this is because of outdated drivers as I recently did a fresh install of windows and only installed the drivers that came on the CD I was given with my computer. I should have downloaded the latest drivers online.
I am running Windows 7 on a Dell Studio 1558 laptop. I am unsure of the graphics card at the moment as I can't access the computer but I know that it is an ATI of some sort.
I'm looking for a notebook, the two things that are most important to me are screen size and performance. My computer usage is mainly websurfing, photos, music, IM'ing, that kinda stuff. I'm a huge multi-tasker, somehow I always end up with 1000 windows and programs open, I need a computer that can deal with that. I don't think I've ever played a game on a computer, so gaming is a complete non-issue.
I live a pretty mobile life, hence my desire for a laptop. I'm drawn towards computers with asthetically pleasing features ie funky colours, light-up keyboards, etc. I know their functionality is limited, just what I like.
I found this one, [url]
it's refurb which is fine by me, I don't know much about computer numbers (I'm trying to learn as fast as I can) but this one seems to be up my alley, I really dig the red too, plus the half price from OEM. Others I've looked at are the alienware m17 and the dell XPS 1730, although it doesn't look like Dell is selling that from their canadian site anymore.
I decided to redo another thread about Windows XP Pro 32-bit drivers that will work with the Studio 1737 Laptop. These drivers may work with the 1735, 1555, and 1535 lines as well (except for the Chipset).
Please note the components of the system I purchased. (Below) If you have any of the same components, then you're good to go. I'll post other drivers as well that I find along the way in this journey of getting the Studio line to function properly on Windows XP Pro 32-bit.
My Studio 1737 main components purchased in Sept, 2009. Intel Core 2 Duo P7350, 2.0GHz, 1066Mhz, 3M L2 Cache 512MB ATI Mobility Radeon HD 3650 Intel 5100 Wireless-N (1x2) Half Mini-Card Broadcom ethernet Creative Sound Blaster X-Fi MB (the particular Creative software I have will not install on XP, but the IDT Audio drivers are needed) Back-lit Keyboard (no application for this in XP. Just press the FN and RIGHT arrow)
Also, I'd like to add these observations. 1. Touch Pad (black plate above the keypad) -- The Volume, Pause, Stop, Eject controls work, but the Volume Up and Down ONSCREEN Diagram doesn't appear. BUT IT DOES WORK, JUST KEEP TAPPING THE VOLUME BUTTONS, and you'll notice the Volume fluctuates. 2. For Battery and Power Screen brightness to be the same... Press FN and the UP/Down Key. Then unplug Power cord, and repeat for the brightness to be the same when unplugged. 3. For Back Lit Keyboard to work...Press FN and the RIGHT ARROW. Repeat this action to dim, and turn off.
Picked up one at Futureshop in Toronto. Originally I wanted to go directly through Dell so I can upgrade to the 7200rpm sata harddrive, and possibly WLED display. In the end I couldn't want to wait x weeks for it to arrive (for work reasons).
Overall impression, very happy!
-I chose this mainly for the keyboard. Very simple english-only keyboard, with hardly any multi-functions on one key. No crazy labels and colors, just plain jane. Loved how all needed working keys are included like pgup/pgdn/home/end/del/backspace/etc... I find it infuriating on other laptops when any of these keys are missing, combined, too small, etc. Love the seperate numpad.
-Yes, the keyboard is 'flexy' but I don't think it warrants the amount heat ppl are giving it. I kind of like it flexy actually. Maybe they are on to something in terms of tactility or useability.
-Biggest disappointment: no backlit keyboard included !!!!! Was a shocker to me which I only discovered 5 hours later at night. If you order directly from Dell in Canada, do you get a backlit keyboard? Is there anyway this can be added or upgraded?
-Yes, it does have an eSata port! Some people have said only the 15" Studio version does does.
-Love the power and find-network buttons on either side of the display hinges. They got a rubbery touch and the placement makes sense.
-I am pretty sure I got a regular CCFL LCD with this, as Futureshop doesn't have the option to upgrade to WLED or RGB LED backlighting. I'll say I'm very happy with it, and my at home I am going to connect to a CRT anyways, which I can do colour correcting work on when I need to. I think I spent too much time worrying about upgrading the display when the regular CCFL LCD is fine.
I'm having some pretty big problems with the wireless on my 1737. It has the Intel 5300 card installed.
I have an 802.11a/n router, the AVM Fritz!Box Fon WLAN 7270. It worked perfectly fine with my previous laptop, an Acer Aspire 5920G with an Intel 4965 but with the Studio it constantly drops off.
On Wednesday it disconnected and reconnected 51 times in 5 hours! Setting the router back to 2.4 GHz seems to reduce the disconnects but not remove them entirely (2.4 is clogged in my area so that's why I'm using 5). The thing is, I tried a 4965 card in the Studio and that was dropping off too .....
I just purchased a Dell Studio 1737, my first notebook ever. Here are the specs:
Intel Core Duo T6400, 2.0 GHz, 800 MHz, 2M L2 Cache 4GB DDR2 800MHz 2 Dimm 320G 5400RPM SATA Hard Drive Intel Graphics Media Accelerator 4500MHD Integrated High Definition Audio 2.0
(All for $830 with taxes and S&H. Good deal?)
I'm pretty happy with it so far, but I was wondering about the VGA output on the left side of the model. Supposedly it's only for output, but it's a female connection and I was wondering if I could make it work as a VGA input. (My desire is to play some Xbox 360 on it.) I'm using the Vista 64bit OS. Is it possible with this integrated card, or would I have to go out and try to upgrade it? Is it possible to upgrade the video card on the Studio non-xps .....
Colors are not correct on my Studio 1737 RGB LED, even after calibration with Spyder2Pro. Calibration adjusts the color temperature etc, so gray-scale images and documents are displayed correctly. But there is ridiculous over-saturation of colors. It just hurts my eyes.... Interesting thing though, inside ICM-aware applications (PhotoShop, LigthRoom) images are displayed correctly - just the image, program window itself and tools etc are over-saturated.
Several users had reported this problem in this forum, so it is known problem. Some were able to fix it with adjustment of saturation settings in ATI color control panel. Unfortunately, my notebook is equipped with Intel 4500 MHD integrated graphic card, and somehow saturation control is missing in "color Correction" tab of "Intel Graphics Media Accelerator Driver for mobile" .
I did set up Dual boot with Vista/XP and the problem is the same in XP. Futhermore, over-saturation it is noticeable even in BIOS and during Windows start up.
Is my LCD (RGB LED) panel faulty? Graphic card drivers are raw? Video-BIOS is messed up? I this fixable or not?
I spent couple hours on the phone with Dell Technician trying to solve this problem. No luck so far...
As of now, I am thinking of returning this laptop. Such color reproduction is just not acceptable, considering that I paid $250 for the RGB LED, expecting close-to-perfect colors.
The keys on my Studio 1737 are very difficult to press. I'm a good touch typist, and this just requires way too much hammering to keep my speed up.
Same thing happened when I got my first Inspiron 1705, but I found out that there were multiple manufacturers for those keyboards. One of them made light touch, the other made very heavy touch (though not as bad as the 1737). Swapping the keyboard solved the problem.
My Dell Studio 1737 won't boot up. I can hear it running but nothing comes on the screen. I tried removing the battery and booting up with the adapter but nothing comes on the screen so I can't run any diagnostics.
Im after a remote control for my studio 17, but im not sure where i should look! Iv tried searching for similar threads but didn't come across many so decided to ask here. ZDFDSFSF Iv found this one on ebay, but it doesn't recharge from the slot. Are there any versions which do? if not how long does the battery last? and finally, will that remote be suitable for my 1737