I've got a new Dell Vostro 1500 with the Nvidia 8600M GT video card, and when I add a 2nd monitor to my display, the resolution of my laptop monitor drops to 1280x800. Anyone had this problem and know how to fix it? The 2nd monitor is an AOC 22LVWk, haven't tried it with any others yet.
I have a Vostro 1500,and the picture went out.I would have to order a part,and have someone install it,so I bought a ST2220 monitor.I have it hooked up and have a picture,but there is about an ince of black area at the top and the bottom,that the picture doesn't cover.How to make the whole screen covered.
My Dell Vostro 1500 has been behaving strangely. I have a problem which occurs sometime when I start it up.
When booting, the monitor does not turn on and it does not complete the start up (I can tell by the hard disk not being read). However, if I press the area to the right of the "Power" button (above the keys F8-F12, Num lk, Print Scrn, etc), the monitor turns on and it proceeds to boot. However, when windows starts, it suddenly gives a blue screen and says "Hardware Malfunction". I have no option but to shut down. If I try running diagnostics, everything shows it is running fine. I can also run Windows "Safe Mode".
I figured that if I press the area to the right of the "Power" button WHILE turning on the computer, it starts up normally. After that, it gives me no trouble at all.
I thought I was fine, until another problem came up. This time, when I start up, the monitor shows up as a white screen, but it seems to boot normally. I can even shut down with Alt+F4. I can run diagnostics and all, but I only get a white screen. Sometimes, I get a combination of this and the above problem.
After this problem, I shook my computer a bit, and managed to get it to start normally. I haven't shut it down (or hibernated it) as yet.
Can anyone suggest what I can do with my computer? I am afraid the problem might get worse. Should I have a replacement for my video card or video RAM ready?
I have recently purchased a W540 and connected to my Dell u3011 30" monitor. I used the Dual Link DVI-D cable that came with the monitor and plugged it into my Ultra Dock. The maximum resolution i can get is 1920x1080? When i change over to a Display port cable i can achieve the full 2560 x 1600 resolution? Is there something i need to do in addition to achieve the full 2560x1600 resolution with the DVI-D dual link cable? I want to be able to connect 2 laptops to the one monitor and only have 1 display port input so i need to be able to use the DVI cable on the 2nd machine while still achieving 2560x1600 resolution.
my vostro 1500 was working fine, it decided to not boot up randomly. when i press the power button, the power led comes on, followed by the hdd led, and the power led stays on . The lcd does not power on. Tried booting using only the battery, same. the power adapter, same. took the notebook apart, reseated the processor, heatsink, ram, and all the connectors, still no luck. tried replacing the ram with my other laptop, same. the hdd works on my other laptop, so i dont know what the exact problem is. This occured once last time, but it booted up fine after 2-3 tries, now it just wont boot on. tried connecting an external monitor, still no life. anything else i could try? and i rule out the faulty 8600 chipset, as i never overclocked my laptop, and always used thermal paste every 6~ months. would really appreciate some help, as im typing this on an ancient hp pavilion ze series, which still works after all these years.
I have a Vostro 1500 laptop with a Core 2 duo T5470, which is supposed to have a 1.6GHz frequency.
I noticed that my computer was going a little bit slower so I check my CPU and saw that it was only running at 1.2GHz.
I thought it would be an easy fix by going to my BIOS and turning off speedstep, but when I looked I see that it is already turned off. I updated the BIOS and turned off speedstep after the update and it is still running at 1.2. Any ideas on what this could be?...
I've decided to add more RAM to my laptop. I have a Vostro 1500 and it's already 2GB but i want a 4GB. My question is that if I have a 1 2gb in the slot or 2 1gb RAM in the slots. I don't want to open up and laptop and possibly screw something up. Also what type of ram do i need? DDR2? PC-XXXX?
Just wanted to see how many people have had the Vostro 1500 and had their GPU burn out. Also how you dealt with it. I'm currently fighting with Dell tech support as they believe that every laptop line they have with the 8xxx series Nvidia card is affected but the Vostro 1500? That is just not logical especially with other OEM using Nvidia GPU having the same issue.
I installed Windows 7 64 bit on my Vostro 1500 and had no issues. Well, one small one, there was one unknown device (Base system device) in the device manager until I downloaded a driver for the Ricoh R5C833 memory card reader and installed it.
I also downloaded a driver from nVidia for my 8600M video card .....
So the LCD in my 15-month old Vostro 1500 went kaput this evening. I immediately hooked up an external monitor to google the symptoms (I could still see a faint image on my display) and I came to the conclusion that something is wrong with the inverter. I've never messed with LCD's before, so I don't even know what that is.
Anyways, I immediately contacted Dell Support figuring this would be covered by my 2-year warranty (guess I'm pretty naive). They got back to me pretty promptly notifying me that the LCD needed replacement and that was not covered by the warranty. I was then given a spare parts number that I should call if I wanted a replacement part.
Does that sound right? The whole LCD needs replacing? How expense and technical would this fix be?
I opened my laptop to clean it using the manual on Dell website and when I got it back together it doesn't want to charge. When I plug it in the light on the charger goes off and a squeaky sound can be heard from the charger.
My friend has Vostro 1510 and mine and his chargers work with his laptop, but not with mine. So anytime I plug his or mine chargers the light on it just goes off and then it has to be unplugged and plugged again in the socket to restart it.
I believe there is some sort of protection in the charger, other than the fuse. Without the battery the laptop does not work
Just recently i opened my laptop up and got it out of sleep, i opened up the game world of warcraft , and as i was logging in, it froze and made loud noises constantly so i turned it off right away, and tried to reboot a few min later but no dice.
when i push the power button the power led comes on as well as the upper keyboard leds, the caps lock led flashes, idk if that means anything, but nothing from there, screen is blank and no hard drive seems to be spooling. The power brick led remains on when i plus it into the laptop and i have tried it without battery, ram, HD, and such but it won't start
Since I couldn’t find any reviews of the Vostro 1500's i thought I’d go ahead and write one so hear goes
My wife and I decided to use our income taxes to get us both new laptops this year. After ordering a pair of these awesome lappys at midnight Friday morning, a scary ordeal (they were missing form the wish list when i went to move them to the shopping cart) I was content to waiting for the estimated build date of Feb 22 and a estimated Delivery date of Feb 27-29.
Then as i was checking my email Monday I got a email from dell stating my laptops had been shipped. Excitedly i read the email to find more good news. my laptops would be delivered the next day! woot! after scaring the hell out of my kids with my excitement (yes i actually yelled WOOT!) i told my wife who Immediately did the same thing, again scaring the kids but they all got a good laugh when we explained to them why we were so happy
First impressions This thing is Fast. Having never used a dual core computer I was always skeptical as to the speed boost (Never saw the speed boosts that sli boasted) but this is hands down the fastest computer I have ever used. And I picked the lowest speed processor available for this laptop.................
My wife has a 3-year old Vostro 1500 running Xp Pro, Sp3, and it was somewhat messed up (wouldn't accept Windows updates, the Firewall stopped working, and couldn't be turned on even with administrative tools, stopped being accessible on the network, etc.).
So, I backed up everything 3 times, including a drive image, and wanted to reinstall XP using the Dell XP SP2 disk.
I removed the Dell Mediacenter partition, but left the first (small) partition. I reformatted the remaining partition as NTFS, and installed XP. Despite the fact that the Dell disk contained the SATA drivers, when I looked in Device Manager, I found that the HD was seen as an IDE drive, and not a SATA drive .......
I need your help to get the MD iso for my Vostro 1500. I can't ask for it to Dell cause I bought it from a reseller. Dell asked me to do the transfer of ownership but the dealer didn't wanted to give me the information to do that.
So that is why I'm asking four your help. I have downloaded several versions posted in the www but non of them are for Vostro and I can't intall it.
I formated my HD and tried to installed as factory with those downloaded versions. This make the 3 partitions, I install the Vista and at that point everything is ok, but when I insert the MD disc it says that the system version is not supported by the MD i have
I'm looking for an extra Hard Drive bezel/Caddy (the flimsy plastic piece you screw onto your hard drive) for my Vostro 1500. The piece has to cost pennies to make, but I'm having a hard time finding one.
I was appalled to find it here at this price ($45): http://www.laptopking.com/kingpartde...ategory=caddys
Anyone know of a good place to find this part?
They have the entire caddy for sale on ebay, but I'm just looking for the plastic piece: http://search.ebay.com/search/search...=32%26fsoo%3D2
So I have a 3 year old Vostro 1500 with T5470 (1.6Ghz), and it's starting to show its age... I'm thinking of adding some extra life to it and doing a CPU upgrade to the best possible CPU. So I'm just wondering what's the fastest CPU the Vostro 1500 will still support? Is it the T9300, or something higher?
I have a secondary laptop, my vostro 1500 and it is running pretty damn hot IMO.
With only the 1.6 and 8600m gt it is running at 60C core 1 70C core 2 and 40C GPU at idle.
I just cleaned out all dust and re-artic silvered it and there has been little change. Infact this is the second time, I thought I might have done something wrong the first time so I did it again and no improvement.
This might sound like a really stupid question, but could someone break down the differences and perhaps list the benefits and disadvantages (if any) between the two?
I know they're built on the same chassis. I know the Vostro comes in all black with a silver keyboard and the option of Windows XP whereas the Inspiron has 7 fantastic colours and three versions of Vista. But the reviews say different things, like how the Vostro gets hot but the Inspiron doesn't. Do either come with different versions of the 8600M? GS vs GT, DDR2 vs GDDR3?