I checked for an upgrade for my cat driver and found out ati released 10.3 [url]
I'm given an option to install but then the program stops. Any idea how to get this working?
My laptop is dv7 w/ati hd 4650 running Cat 9.7.
Normally I can do this easlly, but for some reason I'm having a hard time bringing my XPS16 Video drivers up to speed.
Maybe it's because I'm used to dealing with Nvidia drivers....
Can someone detail the process?
how often Sony upgrades their drivers?
I'm sitting with a SZ71 and nVidia driver from 2007.
I got some graphics issues and wouldn't mind to upgrade the drivers.
Is there a way to use the stock nVidia laptop driver upgrades on a MacbookPro? The bootcamp drivers are fairly out-of-date.
View 4 Replies View Relatedupgrading the cpu in my compaq c310ea laptop from a t1300 solo to a dual core one. the info i get of cpuz is its :-
intel core solo T1300 @ 1.66ghz, Yonah,socket 479 mpga, 65nm, chipset intel i945gm.
I've been thinking about upgrading my computers ram and after doing a quick search I found this. Now assuming this everything is correct I should be able to add another gb of ram to my system. My question is, will I need to do anything such as increase the fan speed to stop overheating, or should adding another gig with the default fan settings not give me any trouble as far as overheating goes?
View 10 Replies View Relatedim thinking of upgrading the processor on my relatively old Compaq V6133CL. I currently have dual-core AMD 64 X2 TL-52 with 1.6GHz and want to upgrade to dual-core AMD Turion 64 X2 TL-60 with 2.0GHz. I did research on my own and asked HP tech support, which is pretty useless, but still need some advice. My question is will it be supplied with enough voltage, seems like it needs 1.075 / 1.10. The socket type is S1 in both. Are there any other things that I should be aware of?
My current system:
1.6 GHz AMD Turion TL-52
Mobo: Quanta 30B7 with F.3D bios from HP
2Gb DDR2
I've finally recieved my windows 7 disk from HP
But before I go and upgrade/install everything I have a few questions.
1. Am I able to do a clean install? Does the product key in the kit allow for me to do this?
2. How would I go about doing a clean install properly? (paranoid about mucking things up)
3. After doing a clean install, am I able to use the second disk to update the drivers, etc. or can I only use it when doing the upgrade option?
I am going to do the processor upgrade getting it up to 2+ with 800mhz bus I will have to have some ram to match it
But ram is something I do not have too much knowledge about, what is the best ram I can put in my dv9535nr?
[url]
I plan on doing 4GB of ram even though HP says max 2 I have found by posts here people have succsessfully installed 4GB with an upgrade to vista64.
I found this but dont know is it just cheap crap or a good solid piece of hardware?
[url]
I'm looking at upgrading my dv6500t from a 320GB hard drive to a 750GB or even 1TB HDD. Problem is, both are 12.5mm thick. Will these thicker hard drives fit in the bay of my laptop?
View 4 Replies View Relatedi read somewhere that you cant upgrade the gpu of this model. however ialso read somewhere that it is a mxm-compatible card.
can it be upgraded and what slot is it?
The idea is to replace dv2's MV-40 CPU with newer AMD Athlon(TM) Neo X2 (L335) or AMD Turion(TM) Neo X2 (L625). Any thoughts on this?
The questions are:
1) do dv2 and dv2z have the same motherboards?
2) how complicated would it be to replace CPU in a dv2?
3) is it worth it?
I'm using my 8510p. I was smart enough to buy an extended warranty, and it has proven to be quite usefull. (2 screen repairs and a new GPU.)
Now, over the time I have upgraded my notebook. The main HDD was upgraded with a 640GB drive, and I replaced my DVD/CD drive with a special bracket that allows you to install an extra Hard drive. Until so far, all these upgrades could easily be reversed for warranty purposes.
Now, I'm thinking about upgrading my original WSXGA+ screen with a WUXGA screen. (1680x1050 to 1920x1200) As since I'm using my computer a lot for graphical applications and CAD related stuff.
Now, I found a supplier that can supply me the screen, but he only recommends me to change my screen with something of the same resolution. He fears that the inverter may not be able to pull the higher resolution, nor my motherboard/gpu fail to recognize the new part.
Do you guy's think that this upgrade could be possible?
Personnaly I would go for it, since the 8510p was offered with a WUXGA screen, and the CCFL of the new screen would be exactly the same as the (current) WSXGA+ screen.
if I could replace my HDD (120Gb SATA) Pavillion 6704nr with a Hitachi 320 Gb, 7200 rpm drive. Also how would I transfer the system and files to the new drive.
View 4 Replies View RelatedMy 2 years old dv6000 display yesterday started to show a thin yellow vertical line about 2 inch from the right of the screen which run from top to bottom, and after a bit of googling, I found out it's unrepairable and I need to replace the screen
Anyway, after reading some of the threads on this forum, it seems to me that it's possible to replace the screen with a higher resolution one, albeit on dv9XXX ones. Has anyone done this upgrade on dv6XXX? And what screen (spare parts no/maker) did you get? Was there any 'misfit' with the hinge/panel/connector/inverter?
Vidcard=NVIDIA Go 7400
Screen =15.4" WXGA HighGloss BrightView
Screen max resolution=1280X800
got a DV7 with 2 partitions- C: drive with OS ad D: drive with the recovery part.
I have burned 3 recovery dvds from the laptop.
If I put in a new hdd, fire up the recovery discs.. I know it will create a C: drive with the OS.. but will it also create a D: drive with the recovery part same as original hdd?
I'm thinking of upgrading my ZV6000 to a FX-55 (San Diego), right now it's got an Athlon64 3200 in it. I've found some used FX-55 on eBay for around $120, and some 1GB SO-Dimm for $33, so the upgrade will cost about $170 after shipping. Is it worth it to do this upgrade?
View 7 Replies View RelatedIt does not use a standard DVD drive, its smaller (10mm instead of the 12mm I use in other notebooks). Anyone know a drive that is compatible?
View 7 Replies View RelatedI am about to purchase the HP DV7 2015tx, with the q9000 cpu.
I am happy with everything, except the potential future performance of the CPU. The only remaining question for me is whether it is possible to upgrade the CPU to say, a q9550 if in future I am not happy with the speed of the q9000. I'm afraid I don't know the motherboard type or what it supports.
Also, if it is possible, might this create heat issues or like instability?
If you were to upgrade your laptop with dual channel memory, what combination would you use to upgrade to 6GB? Currently, I have a dv8 with 4GB (2x2GB). Would you have a combination of 2GB and 4GB? Wouldn't the ram pieces have to be of the same value and from the same manufacture?
View 10 Replies View RelatedI just bought a new HP laptop and it has 3gb ddr2 memory. It says that the max memory is 4gb, but I was wondering if you can put in say 6gb or 8gb? Reason I ask is because I saw a sony laptop that was essentially the same with the memory being the exception. On the Sony, it came with 4gb and was expandable to 8gb. Oh, and my laptop is running Windows 7 64bit if that matters. If its not possible, Ill just upgrade to 4gb... If you guys could though, maybe tell me what limits a pc's ability to run a certain amount of memory? Mine has 2 slots for memory and I have seen some 4gb sticks for sale, but Im not going to spend the money on something that wont work.
View 6 Replies View RelatedI am looking to upgrade the internal wireless card of my dv6408nr to a card that supports draft N networking. I tried an extra Intel 4965 a/b/g/n card my friend had and the computer would not even boot. Is anyone aware of an internal card that would work? I hate to order something and have it lock up like the Intel card caused. Alternatively is there a way to make the Intel 4965 work? FWIW, I am looking to avoid a USB or Express Card solution.
View 10 Replies View Relatedwhich r better in ur experience for the GeForce 9600 M GT FTW?
View 9 Replies View RelatedI am going to upgrade my dear HP elitebook 2530P with an additional harddrive insted of my optical drive, So I where browsing the Maintenance and Service Guide [url] .
On page 68 - It says :
-----
Secondary hard drive cage assembly, includes additional USB port (required for installation
of secondary hard drive
492574-001
-----
Secondary hard drive connector board (required for installation of secondary hard drive) 495027-001
-----
Secondary hard drive system connector board (required for installation of secondary hard
drive)
495028-001
-----
I am going to install a normal 2,5" disk, so which of them do I need ?
I found videos and know for sure that upgrading the memory is possible. But i cant find anything on replaceing the 80 G HDD with a larger HDD.
I found the Memory on newegg, also picking up a external dvd drive so i can re install windows and such once i figure out if replaceing the stock HDD is possible
my plan is to buy an 8530w and swap out the cpu for a Q9100 Quad Core. Anyway, is there special cooling needed for the quad core? I asked only because i noticed that if I tried to add a quad core on the HP website it requires a 'special' graphics card. This got me thinking that they might have added something for the quad cores that they leave out of the normal ones.
View 10 Replies View RelatedI am thinking a bit later on this year of perhaps upgrading my Envy, as I would love to get USB3.0 and a bit more power on the gaming side would be great.
Not wanting to fork out the money for a brand new one, I thought I might possibly be able to upgrade just the motherboard to the current model (i7 version), which would include the USB3 and 5830 graphics... and would cost me quite a bit less (my current specs are in signature)
I just want to know if that would be possible? I assume that all the other parts are pretty much interchangeable, and from what I can see there were no significant changes to the chassis or anything else from Gen 1 to Gen 2....
I have a compaq cq50-209wm and it has a intel celeron 585 running at 2.16GHz. I'm not a really big fan of this processor it seems really slow, so I was wondering what other processors this computer supports. it has a socket p 478 so it must support some of the mobile core duos,
View 8 Replies View RelatedI'm looking to upgrade a few things on my HP DV9743cl and I am having some problem finding out if the factory components will support the possible upgrades.
Processor:
T7250 ---> T9900
RAM:
3gb PC2-5300 ---> 4gb PC2-6400
I've actually purchased the PC2-6400 ram, but I'm curious if it'll actually run at this performance or stay at the PC2-5300 performance level after the install.
GPU:
NVIDIA GF 8600M GS ---> NVIDIA GF ?
Can this even be done since the GPU is integrated?
HD:
2x 160gb (which I think are at 5400 rpm) ---> 1x SSD Intel x25-M 80gb for the OS and a 10,000rpm HD for secondary
Currently running Windows 7 32bit after a clean install.
is it possible? how easy is it to do it yourself?
I have an elitebook8530w 2.5ghz core2duo atm and would like to upgrade it if possible.