my HP tx1000 has just become my second, rather than my primary computer, and I'm looking to finally use it as a media center PC with the XB 3000 docking station I bought with it.
The XB 3000 has some nice component jacks, so I presume I want to use those. But it doesn't seem to have speaker outputs, just SPDIF and a Headphone jack. I presume I want to get a cable that will go from the headphone jack to the stereo inputs on the TV?
i wanted to output the dv5 1009tx to a crt
i bought a vga to 3x RCA (component cable) now thing is it does not output video to a CRT tv
now i know you guys might say use the HDMI , but well i cannot afford an LCD currently or in the near future, and yes the tv isn't any larger stands at 20 or so inches (sanyo)...flat (or as near as flat can be...)
i am using the latest NVIDIA drivers from their website,....i have previously in the past been able to setup dual/clone displays with NVIDIA cards....(using DVI/VGA desktops) but apparently this does not work, the Display driver picks up the TV but sadly no display
i have tried
No interlace (on laptop and tv)
reduced Reso to 10x7
flicker at 60Hz
the tv shows a bluescreen and it flickers....but no image of the desktop
my qs to you all is.......do i need any specific cable (as this one states it is a DVD player to projector...but shouldn't it work anyways?) any other settings i may have missed
(my duty roster would not allow me to get to this shop for another week+) i do not have VGA to RCA or svideo
I decided that I am going to pass on the HDTV and get a LCD TV. I am going to get the Insignia because I found out my Best Buy discount works again so I can get the proper cables I need and a TV! It was either the Samsung 27" Tube or this 26" Insignia, and its about the same price so I might as well get it!
My question is is that the LCD TV only has 1 HDMI, which I would be using for my Upconvert player. Should I use VGA from the 1710 to the tv--> Does it support HD out?
when i remove the battery, there is a device that clips into the body and it has a connector on it with very thin wires running to it....
i assume it might be either the wi-fi card, bluetooth, or something else ?
can anyone confirm please ? i unclipped it from the body of the laptop and looked at it but noticed some discoloration on the printed portion of the board that i can see, kind of like it got wet in the past....
To preface this post I am in no way new to HDTV or computers for that matter, but I wanted to get some facts straight.
I am moving into a house at school and wanted to get a decent TV. I am getting a 27" Tube HDTV.
I am moving in a fraternity house so an LCD or plasma isn't something I want to invest in just yet. So please don't recommend one of those. I am planning on hooking up my 1710 to the TV and wanted to know how the Component Video Output looks on it, to make sure its true 720p/1080i or if they are just sending a 480p signal out of it. I am assuming it will be HD but I wanted to also get some first hand responses from anyone that may have used this output on a tube HDTV. I know a standard tube will look like garbage but I am hoping a HD tube might perform better. I MAY use DVI to HDMI, but with my room configuration I have to get a 12' cable so DVI to HDMI in that length might be too pricey right now.
anyone run a benchmark utility such as Lavalys Everest or Sisoft Sandra or similar to tell me the name of the manufacturer of the Firewire chipset in the Inspiron 1720 please? Not the motherboard or CPU chipset, just the firewire component of the laptop, please.
The benchmark software is free, and they tell you what components are inside your particular computer.
Reason I'm asking is that I have an external firewire soundcard (for professional music recording), and for maximum compatibility the soundcard manufacturer recommends the soundcard only be used with certain firewire chipsets.
I am a "silver surfer" with limited computer knowledge and would greatly appreciate help with a problem which has recently occurred with my Acer Aspire 5920G laptop which is running Vista SP1.
All of a sudden and for no apparent reason, when I switch on I get a message " eDSLoader.exe Unable to Locate Component. This application has failed to start because ADMIN_CLASS_LIB.dll was not found. Re-installing the application may fix this problem"
This is followed by a Windows Message which says "eData Security System Loader (Load and prepare environment) has stopped working" and I get the 2 usual Windows alternatives.
Looking in Google, I see an article which says this problem is not serious. It says the eDSLoader program relates to data encryption and is not normally used. The solution recommended by the article is to use msConfig and disable the program from running at start up.
Before doing this, I would like to double-check with knowledgeable members of this forum.
Is disabling the program from running at start-up really the best solution ?
Or should I try to re-install the program in question ? If re-installing is the best option, do I uninstall in the normal way and where do I find a new version of the program to re-install?
m6400 with a single 200gb HD which is not really enough space.
At the moment I am trying to decide between doing one of the following
1. Buy 2x320gb 7200 WD drives and raid 0 them up WD 320 : 66.69 * 2 = COST 134 GBP approx Total Space 640 Gb
2. Buy 1 320 hdd and 1 60 gb SSD to boot off SSD : 137.99 + WD 320 : 66.69 = COST 205 GBP Total Space = 380 GB
3. Buy 1 320 hdd and keep the 200 gb drive its coming with
COST 67 GBP - Total Space = 520 GB
I would like it to be quick (obviously)
Does anyone know how a single SSD compares to twin 7200 hdds in raid 0 ? (approx)
The SSD I would probably buy is the OCZ "solid series" (read "budget series") but it still appears to be quick at least according to the OCZ site, I couldnt find any actual reviews of it because I think its too new (its the red coloured one).
Im a little afraid of the risks involved with raid 0 plus the fact that I couldnt just swap out one of the drives without loosing the array.
Maybe a single 7200 is ok. Has anyone any experiance with this SSD?
Also second thing
I am also thinking of buying some more RAM - the 2 brands I am looking at are OCZ and G.Skill
They are both identically priced and the only 2gb dimms for ddr3 that the shop I am looking at stocks.
I'm looking at the motherboard on my Aspire 5601AWLMi (mobo id "31zb2mb0091" ) and I see there's four places where can insert cards. Two are the RAM chips, those are labeled DDR RVS 1.8V with "tyco" written on the other side of the plastic bracket, there's wireless card slot not really labeled with anything conclusive over near the Lan and Phone port, and then there's another slot labeled "0624n3" on the left side of the plastic bracket and "-+AMP" on the other side of it. I have absolutely NO idea what that last slot is for, and I'd like to know, if anyone can figure it out.
To describe it, pin wise starting from the left it has 1 pin, a divider, then 61 pins in a row. I think it's 61. I'm not willing to recount :P
It's physically shorter than a ram chip, but not by much more than 3/4cm is my guess.
You can see the slot itself in this picture:
[rl]
The slot is sitting just above that big red..knob..thing.
Also, I found this page, but it didn't tell me anything useful, I think. The mobo is flipped over in the diagrams..
[url]
I found the part number for the raid component in the Z-series. You just need two low-profile SSD, and you should be able to do RAID in the Z-series laptop without paying for RAID config from Sony.
Part number is A-1553-769-A
You can go here to purchase the part
[url]
You may be able to use this in the TT as well, but I'm not so sure about that.
I have Inspiron E1705 with WUXGA (1920x1200) which I want to connect to my rear-projection TV that has only component video inputs.
I've bought this S-Video to Component adapter:
[url]
But when I switch to external monitor (TV) via Fn-F8, the screen switches to 1024x768 (TV starts showing in that resolution too), and there is no way I can raise the resolution.
But I really want HD 1080i !
I know my TV can support it, as I can switch my XBMC to 1080i and TV switches to it.
I tried to play with PowerStrip options, without much luck.
Is there any way to achieve my goal?
I have Windows XP Professional SP2.
I have got Notebook Compaq Presario.. I cant connect to the internet using the wireless connection.. the reason is that i accidentally did some operations, and cannot switch on the light on the front panel of the notebook.. it does not work, i mean the light of the wireless connection button does not light.... I turned off something...
View 8 Replies View RelatedCan We Change Processor Of Hp Compaq Presario Which Is Having Amd Processor Right Now
View 3 Replies View Relatedi am looking to actually look, touch , try an HDX 16. But can't find a store that carries it.
View 5 Replies View Relatedwhere i could get most or all drivers for windows xp for the hdx 16t 1100,
View 5 Replies View RelatedDoes anyone have a good way to OC this laptop other than using ClockGen? I am basically wondering if there is a BIOS option. I know there are some OC guides out there, but this laptop is almost 3 years old, and as far as I can tell does not have an option in the BIOS. Also, my proc is the T2600, not the one is this review, but other than that exactly the same. I am looking to play around with this because it is old and I dont care too much if I fry it since my new hotness is on the way.
View 3 Replies View Related1. How do I make it so the volume 'screen' (the little pop-up) doesn't show up when I chance the volume?
2. Is there a way to completely remove and disable the fingerprint reader?
I'm using Vista Home Premium 64 bit.
By the looks of the bottom of my laptop it seems it might be mxm compatible as there are lots of removable pieces... including one that looks alot like an mxm slot. I know that this laptop can be configured to come with the 9200m. This is a fairly brand new model but could someone tell me whether this thin is mxm compatible?
View 4 Replies View RelatedIve just about had it with Vista on my laptop and want to try a new OS before I junk this thing. Is anyone running Win7 or Ubuntu on a HP DV5z AMD 64 bit laptop? The machine is about a year old and I have 4gb of RAM and the thing is a dog. Ive used Ubuntu in the past on Dell laptops and its a pain to get everything running wireless drivers, flash, etc. Win7 being a RC may or may not have everything up to speed on for my machine.
So, if you have Win7 or Ubuntu on a HP DV5z please give me a shout, good or bad.
I have a DV5-1155ee, here are teh sp3cs:
HP Pavilion DV5-1155Intel Mobile Core2 Duo T9400 2.53 GHz. (Montevina 6 MB L2 Cache)4 GB DDR2 RAM15.4” WXGA ScreennVIDIA GeForce 9600M GT 512 MB320 GB HDDIntegrated Webcam, Wireless, Bluetooth, BlurayWindows Vista Home Premium 32 Bit
product number: FT115EA#ABV
serial number: CNF8374VSL
what would my HDD RPM rotation speed be?
Can't really see much difference in these models....looking at Best Buy
Other than 17 vs 16 inch screen are their any benefits to build quality from 1 to the other?
I will be travelling so I would prefer the lesser HDX 16 incher but build quality is a concern
I travel by plane, train, bus every weekend so it needs to be able to handle a little beating
I'm am deciding whether to buy this laptop for school use. It has a great size, stylish, and decent specs for a laptop that is so lightweight. The only turn off is that it was made for entertainment, but should this laptop do well for word processing, spreadsheets, and web surfing?
Would the 9 cell battery last for more than 5-6 hours? My budget is also under 700$ but it can stretch a little.
i am looking to get the hp hdx 16t and was wondering if there is any bg difference between getting the 2.53 (P9400 i think) or the 2.66 processor? Is it worth the upgrade or no?
View 10 Replies View Relatedrunning a dv2 with a solid state drive? What are your thoughts? How has it performed? Have you gained much battery time?
View 4 Replies View RelatedI'm heading off to school, and these stylish, affordable notebooks have caught my eyes. The only problem is that I only get 2-3 hours of battery life on these notebooks although I can buy an extra battery. What I"m mainly doing is word processing, spreadsheets, iTunes, and web browsing but not all at the same time.
Here are my main questions and concerns:
Do these notebooks have good build quality?Is there any other way to charge the battery without having it in the notebook?Do they get hot?
I may have more questions to ask later.
I am buying this notebook in Canada.
Seeing that the battery tests I've seen on some reviews, they are surfing the internet with Wi-Fi on. I will not be, I'll usually be word processing. Should it last maybe 3 hours?
How long does the 9 cell last on the DV3?
I own a DV7-1038CA, I actually decided to buy it after reading what people said about the DV7s on this forum. Unfortunately I have a problem .
I had opened up my DV7 to clean out the fan ( ****load of dust in there) and took the whole laptop apart. I put it back together and it worked perfectly fine for about 10 hours. The laptop worked great until I dropped it down on my table at a height of about 1 1/2 inches, not a significant height but the screen immediately turned white and the laptop shut off completely. It would not turn on at all, the power light would blink for less than a second and turn off and then I'd have to wait 30 seconds before I could get it to blink again.
I then took the laptop apart again and this time I checked if everything was plugged in properly. I decided to leave the unnecessary covers off so I could turn it on without having to screw it all back on, it turned for about 3 seconds....before I noticed the display cable to my screen was on the heat sink and had caught fire. I immediately turned it off but the damage had already been done, the fire had burnt through the wiring on the inside of the cable rendering my screen useless ( whenever it was plugged the charging light on the side of the laptop would turn off). At this point the laptop was turning on but would turn off after about 5 seconds (probably due to the fact that there was no screen) During this little fiasco I had ripped off the ZIF cable that connects the power button board to the Motherboard. So now I had no way to turn my laptop on, I ordered a new screen and a new power button board.......
Looked at the HP DV6 today at circuit while browsing liquidation sales. Looks like a nice laptop. 16inch screen is nice, looks like less vertical screen but web pages look nice. Just a DV5 with a bigger screen?
View 8 Replies View Relatedi sent my laptop (Dv6000) in for repair.
I get it back with a messed up ram stick, a chipped battery and a size bezel that is not installed correctly and has a broken plastic snap...
I'm calling them right now and going to demand replacements, but idk if they are even going to do any thing...
With external monitor hooked up it looks perfect .. this is what the screen on laptop looks like now . I only checked to make sure things were plugged in on the lcd . Inverter or maybe cable ?
View 3 Replies View Related