Sound has busted on T520 for a few weeks now. I can hear sound when I plug in my earphones, but windows recognizes this as a speaker, conexant 20672. I checked the "find and fix audio playback problems" in windows 7 to no avail. I believe I may have to have my speakers repaired. I am still under base warranty until sometime next year.
[URL]
My ThinkPad T520, connected to the Internet through the Intel 6300 WiFi card. The indicators fro the RJ45 Ethernet port are always steadily illuminated. I suspect they shouldn't be.
T520 4239-CTO
T61/p 6459-CTO (Gone but not forgotten)
A31/p XP Pro 1 gig memory
A30/p XP Pro 1 gig memory
TP600 Win 2K 288 mb memory
701C Win 98 Don't ask
I got a T520 with 8G memory, beer accidently spilled on it, it wouldn't start again. So I got a new T430u with 4G memory. I was wondering if I could take the 8 G memory from t520, to be installed on t430u, is it gonna compatible on t430u?
View 7 Replies View RelatedMy T520 (4242) never crashed until I upgraded the RAM.
Initial config : Single stick of 4GB RAM.
- FRU # 55Y3717
- Samsung part # M471B5273CH0-CH9
Tried to upgrade with 2GB from following manufacturers:
- Corsair CMSO2GX3M1A1333C9
- A-data (don't remember the part #, but matching specs)
Result : Approximately once a day, I get BSOD. The system also crashes often while going in and out of sleep.
The A-data RAM works fine on a different laptop (T500), but I experience crashes when I put it in T520. This makes me wonder if my slot has an issue e.g. dust collected over time that causes a random read error. Or maybe I need to find the exact same part from Samsung to upgrade the RAM.
What else can I try? If it crashes randomly once a day, and works fine otherwise, can I conclude anything about RAM compatibility? memtest86 doesn't show any error.
I recently discovered that my T520 has a SIM card slot (inside the battery slot)
I tried to put my cell phone SIM card in it, but there's no reaction (no "New device connected" popup dialog).
What should I do ?
Is there a driver + software that needs to be installed ? Which one?
I've got a ThinkPad T520 and I just bought a Netgear N600 Dual-band Cable Modem Router but my laptop isn't seeing the 5GHz wireless network? Is it even capable of doing so?
View 7 Replies View RelatedI have replaced my old sata disk with a ssd disk . Intel 520 240 gb. on my T520. I have a Windows 7 and a minor Linux partition. Dual boot. I have moved the old image with Arconis True HD.
However, there is a HUGE difference in boot times between Windows and Linux.
Windows is 1 min and 35 sec with windows logo until login screen appears. Then additional 20 seconds.
Linux is 7-10 seconds from Lenovo sign in bios until I'm ready to go. Off course I did not expect Windows to boot as fast as Linux, but things has worsened after the change.
When Windows is up and running the SSD disk is preforming in the same speedy way as under Linux. It is just the boot situation which is terrible. AHCI is enabled .
as i have learned there is no mechanical reason not to use classic keyboard-layout of the 7row model in a t530. but what are the effects of the bios no being able to support the 7r keyboard? which buttons will not work properly?
View 3 Replies View Relatedi want to use the DVD tray to add a 2nd hard drive using one of the many 2nd HD Hard Drive Caddy Trays i see online, but i want to use a solid state drive in it. Can this be done? From what i ascertain via product literature, it appears that any caddy tray i see online says "accepts 2.5' 12.7MM SATA HDD only" or some such." While there are many SSD's that are 2.5 inch, I've only seen ones that are either 7mm or "7mm (with 9.5mm adapter)." Is there a product (either a T520-compatible 9.5mm caddy tray or a 12.77mm SSD) that can make this work?
View 2 Replies View RelatedI this will happen almost everytime if the machine has been in use for some time. Inserting an SD card (4GB Canon format) a BSOD is virtually guaranteed. After a new boot up it works fine but catastrophic if not since all info is lost and nothing is closed.
I looked at the dump file and the FASTFAT.SYS is the cause of the crash. This is a very old driver used in Windows 7 and there are numerous issues with it in many forums dating back even to XP. There are no crashes introduced by any other device or USB key/drive connected. Only the SD card.
I thought it may have be due to the USB controller being turned off for power conservation but even after removing the ability by toggling not to turn off to save power to the USB devices it still crashed the very next time I used it which was days later. The system was plugged in as well as it usually is.
I can do the same thing on my old notebook with its internal multicast reader running Window 7 32 bit and it does not have a problem. The Thinkpad does with Win 7 64bit. I am always conscious of a BSOD occurring if I dare plug in my camera card. This renders the port useless since I cannot afford regular crashes and a card reader externally may have to be used.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3
My SD card reader became non-functional after a recent upgrade of my T520 to Windows 8.1. Hardware troubleshooting said the Base System Device driver was not installed. I installed the Lenovo System Update software and searched for updates, but the driver was not updated. There is still a yellow warning symbol beside the Base System Device in the device manager. Discovered on the Lenovo driver download website that the card reader in my model is the Ricoh Media Card Reader but there is no driver compatible with Windows 8.1. Would the Windows 8 driver work or is there another solution to get my reader running again?
View 3 Replies View RelatedI'm having trouble figuring out why on my T520, after upgrading from 8GB/1333Mhz to 16GB/1600Mhz Crucial RAM, Speccy/CPU-Z still says they're running at around ~660Mhz x 2 = ~1330?
My specs are as follows:
For my T520 (4239-CTO) I have...
Processor: Intel Core i7-2860QM 2.5Ghz
RAM: Crucial 16GB (8GB x 2) DDR3-1600
GPU: Intel HD 3000 / NVIDIA QUADRO NVS 4200M
OS: Windows 7 Ultimate x64 SP1 (w/latest updates)
After Googling for a while and from looking around here I've read nothing that says I shouldn't be able to run at 1600Mhz especially considering my processor supports that speed officially. Another post on this topic (not for the T520 specifically) mentioned that i7's contain the memory controller within itself. So... am I being thwarted by software settings in the BIOS or within my operating system?
I always liked to use the arrow keys on the bottom right of the keyboard for scrolling down pages as I read long documents. For some reason this is not working in Firefox on my T520. What setting I can change to enable this?
View 5 Replies View RelatedI've been trying to set-up a second hand T520 bought without the original hard drive. I've installed a Samsung mSATA SSD. I tried to use a set of recovery discs produced on my T510 which seemed to install but got BSOD whenever Win 7 tried to boot. I then downloaded the Win 7 ISO and booted from the DVD to try and initialise a repair which would not initialise. I next tried installing Win 7 Pro from the Win7 ISO disc which succeeded but ran into problems with unrecognised network components and drivers.
I've gone through this whole cycle again and got to the set-up screen for Win 7 then got distracted; my thinkpad then appeared to have gone into hibernation before I could finish set-up. Unfortunately, when I try to power up I get a few flashing lights for a few seconds; no POST bleep and the power dies. I've tried pulling and reinstalling the RAM and SSD but to no avail.
I have a T520 thinkpad with a docking station. I can get my headphones to work fine out of the laptop, but I would like to leave my headphones plugged into the headphone jack on the dock itself. The computer doesn't seem to recognize this jack is even there. My only sound options are the laptop speakers and the audio jack on the right side of the laptop.
How to enable the audio jack on the back of the dock?
I recently updated a whole bunch of things on my T520, and afterwards experienced a significant slowdown in everything -- startup time as well as just general work. There's often a long lag when opening programs or documents, right clicking, etc. Part of this seems to be due to higher CPU usage. While idling (i.e. just sitting on my desktop) and looking at Task Manager, CPU usage seems higher than normal on some things -- SynTPEnh.exe will consume 3-8% of CPU, one instance of svchost.exe will take up to 10%, etc. My total idling CPU usage is generally 15-25% now. (I have a quad-core i7.) Also, my battery life dropped precipitously; it used to be upwards of 5 hours on a full charge when just doing general web browsing and word processing, but now it's less than 2 hours.
Going around in Process Explorer and Task Manager, I've found a few things that seemed somewhat unusual: A lot of my processes have many page faults -- slightly under 15 minutes after starting up my computer, SynTPEnh.exe has about 250,000, SimpleTap.exe has over 50,000, the instance of svchost.exe with the Base Filtering Engine, Diagnostic Policy Services, and Windows Firewall has about 250,000, and Process Explorer itself has about 250,000. There were also some items that seemed like they might be taking up more memory (Private Bytes, in Process Explorer) than they should -- dwm.exe is using about 150 MB, and SimpleTap.exe is using about 115 MB. Also, my CPU percentage of Interrupts jumps around, most of the time staying between 2-5%.
How to reduce screen brightness below standard level in ThinkPad T520 ?
I think it is possible somehow, but I don't know how. I reduced brightness to zero using Fn key + End key, but it's not enough, I want to make screen darker, because my eyes get tired.
I've been running on a T520 4239-CTO for a little over a year now without issue. I've been getting lots of random bsod and services crashing in the last few days; even Windows 7 cannot validate itself anymore.
I ran all the hardware checks in the provided Lenovo utilities and it all seems to pass. I didn't trust this so I manually checked the smart values on the hard disk and noticed around 2400+ reallocated sectors so I decided to replace the hard disk.
It should be noted that there are no viruses/malware on this machine. After receiving the new hard disk I did a factory restore using the dvd backups I made when I received the machine. Upon booting the new factory install on the new disk I'm still getting the same random bsod and issues with Windows 7 not being able to validate.
I notice that everytime I boot now on the newly restored os that the "Microsoft Software Protection Platform" service has issues and cannot start. I started doing some updates using the Thinkvantage tools and they're crashing too.
This machine is currently on pass 4 of memtest without any errors so far.
I've replaced the hard drive and from the looks of things so far the ram seems fine. Where do I go from here?
My Thinkpad T520, Windows 7 Pro takes over a minute to load any webpage after waking from sleep. The wifi icon shows that the network has connected to the internet after about 10 seconds from wake up. But if I attempt to use a browser to load any webpage, I must wait nearly a minute before the page will load. After that, pages load quickly.
This problem occurs in multiple browsers (FF, IE, Chrome). I am using Intel Centrino Advanced N-6205 wireless adapter. I've updated the wireless driver and BIOS. I've cleaned out my registry using CCleaner, and I've defragmented.
One bit of advice I've read that I've tried from these forums does NOT work: Uncheck from Device Manager under the Power Management tab for my wireless adapater the option to Allow the Computer to Turn Off This Device to Save Power. Unchecking that option (which would seem to keep the driver on) makes the problem worse because the wifi will not reconnect at all.
The sound is failing intermittently on my T430.
Closing then opening the lid to enter and return from hibernation sometimes restores sound. When this does not work restarting the machine usually restores sound. But the sound fails again after an indeterminate period.
Opening Ubuntu Linux in Virtualbox now displays the message "Some audio devices (PCM_in, PCM-mic) could not be opened".
Lenovo ThinkPad T430
2344-DAG
Intel Core i5 3230M CPU 2.60GHz
8GB RAM
Windows 8
just got a T430s with i7-3520M processor (3.60 GHz, 4MB L3, 1600MHz FSB) and 8G memory. How do I stream to my HDTV with sound? USB 3.0 to HDMI adapter? MiniDisplay to HDMI? Any caveats I should be aware of?
View 1 Replies View RelatedMy 3 month old t430s has a major issue with the audio/sound. At completely random times, I will have no sound for a matter of minutes or hours. This is primarily with web software and persists across multiple browsers.
- The speakers all test and the troubleshooting tests say they are working just fine. Occasionally, when testing the speakers, the control panel will give an error stating that they are in use by another program and that program needs to be shut down before they can be tested.
- all drivers are up to date and have recently been uninstalled and reinstalled
- the default audio device is set to the appropriate speakers
- I have had this problem with and without the Dolby Advanced Equalizer driver that comes as an optional sound update
- I have had sporadic luck with plugging in headphones, but often this does not give me any audio either.
How can I fix the volume control key on the keyboard?
(Thinkpad Lenovo T400s)
I have to press it 8 to 10 times to change the sound level...It is not very sensitive.
I just received a new T430 less than a week ago, and ever since I first handled it, the left palmrest has been making clicking/snapping sounds even under light pressure. This region of the palmrest appears to be above the SmartCard reader. Video of this phenomenon is below.
[URL] .....
I bought a Roline DP to HDMI cable hoping to be able to watch HD content in my livingroom and not having to plug an extra audio cable as DP should carry sound too.
When I do the same as on the youtube video, I get the following settings in the control panels: [URL] ....
But there's no sound coming out of the TV. I've tried it on my SyncMaster PC/TV Screen and on my Samsung TV in the living room. On the TV in the living room, the windows audio manager shows the device, but it cannot be selected as show above. It stays grey.
I've got a T420s with discrete nVidia Optimus graphics (Quadro NVS4200M). Driver version is 1.2.19.0 for nVidia HD-Audio and 8.17.12.6696 for NVS 4200M. This information comes from the device manager. I installed my system from scratch and used ThinkVantage System Update 4.
Where the problem comes from? I could only imagine that the cable isn't capable of carrying audio, but that seems rather illogic, does it?
My problem is that when I'm connected with the t540p to the ultradock that this sound comes from the local speakers instead of through the HDMI cable though the monitor and then through my external speaker which are way better.
In the Sound playback devices I have written: "High definietyion Audio Device Not plugged in".
So I tried connecting directly via laptops mindpoit to the monitor and then it worked. But as soon as I connected it to the docking station which is also connected to the same monitor via DVI plug then it results as Not plugged in.
So I tried upgrading the dock station firmware by downloading the fwdphb03 latest firmware, and this does not launch despite being connected to the docking station and using an external monitor and properly plugged in.
How I assume the switch between headphones and speakers should work: I turn on music or anything esle and if no headphones are plugged in, every sound comes from the internal speakers. Now if I plug in headphones then the sound comes exclusively from the headphones. If I pull then out again the sound comes from the speakers and so on.
In my case the situation is the following: If I have no headphones plugged in and turn on music, then I hear if via speakers. If I decide to continue listening to that music via headphones and plug them in, then the music continues to come from the speakers, but for example the notification sound from outlook comes from the headphones. This works vice versa.
If I open, say youtube to watch a video, while having the headphones plugged in, I will hear the sound via them. If I now unplugg them, the speakers will stay silent.
What can I do that if there are no external speakers plugged in (headphones etc.) every sound will be played by the internal speakers, if I plug in some sort of external speaker it comes from them and if I unplugg it it switches back to the internal speakers?
I have a new T440 running win 7 pro 64bit. The audio is not working.
When I first boot, the sound icon in the task bar shows that the system is muted, but the mute button (f1) is not lit.
-If I press the mute button the light goes on and the indicator on the task bar shows the system is no longer muted.
-If I have sound playing, when I toggle from the light on and the tray indicating not in mute to the ligt off and the tray indicating the system is in mute, I get a split second sound.
I have installed the realtek device drivers
I have installed the lenovo system update and all of the critical and reccomended updates.
The device manager indicates that everything is working properly.
Bought a refurb T400 and installed a PNY SSD in it. It POST's okay and I can access bios. I can also read/install Linux from DVD just fine.
Trouble is when I insert my win7 home premium DVD into the drive and boot it, I get POST and then I get a black screen. It seems to be reading the drive and when I interrupt with the Esc key or open the DVD drive, I get a Windows menu explaining that the installation has been interrupted.
I've looked at the bios options and can't see anything obvious that should be changed.
I have tried to make a fresh Windows 7 installation, but after installing updates via Lenovo System Update the system gets corrupt.I replaced the hard drive on an T400 and loaded a image that I had on to the drive. After a installing a few updates and program I noticed strange system beaver. So I did a system file check and it came back that files was corrupt and cold not be repaired.So I did a new fresh Windows install. But it to became corrupt after just running Windows Update and Lenovo System Update.So I ran some hard drive and memory diagnostic without find and problems.
Then I did a new Windows 7 install again. After I installed all recommended updates from Windows Update I did a system file check, all OK. The I installed Lenovo System Update and all its recommended updates and did a new system file check, Windows system files corrupt. What Lenovo update is destroying the system?