I has just upgraded my Thinkpad t440 from windows 7 to Windows 8.1 pro. But i could not find Power Manager software to install in my laptop. I want this software to manage my battery to ensure that it stop charging when 80% capacity. I think that it is useful for my battery.
View 3 RepliesDoes ThinkPad T440 still supports Windows XP (I don't think so)?
View 1 Replies View RelatedI recently my new Thinkpad T530 and I accidentally uninstalled Power Manager. I re-installed it. Now when ever I log on It says, "RUNDLL: There was a problem starting C:/Program. The specified module could not be found." And whenever I turn on the icon in the taskbar it is gray and has three dashes.
View 9 Replies View RelatedI recently bought a Thinkpad 540p and wanted to know a way for stopping the battery from getting charged after a certain level. Its a very common feature to stop a battery from charging say after 80% and run on AC power supply directly.
Other lenovo laptops do support it, under various apps like Energy Manager, or Power Manager but I am not able to find any such options/app on my laptop?
I recently purchased a Thinkpad T440.
As a finance person I need to use the F1, F2, ....., F12 keys on a regular basis. My issue is that I need to always use FN+F1, FN+F2, ....., FN+F12 to work, which is not the most convenient thing to do.
Is there any way to switch these two? Going in the BIOS offers me only the opportunity to switch between Ctrl and Fn.
This computer originally had an issue with the 2100 Detection Error. This computer was previously built with no issues when it was imaged with our company's Windows 8 configuration in which I am highly sure our IT engineers have worked closely with Lenovo on. Also out of the tens of thousand computers that were imaged this way this is the only system I have dealt with that has this issue. I luckily had a good T440 I could test this system's SSD in. The hard drive appears to be fine with no issues. So that rules out to be the SSD. I ordered a system board under warranty and installed it. Everything so far responded fine with the system board replacement until I performed the model type/serial number and UUID update using my 1.86 maintenance update USB thumb drive. After that completed the computer froze on the Thinkpad Logo screen. I verified again for my piece of mind that the memory module and SSD was fine. Sure enough those components were tested fine in a known working T440. So I submitted the system board as a DOA with an explanation. I received another system board to replace with the DOA. I installed that system board to once again update the Model Type/Serial Number and UUID using my USB maintenance disk 1.86 thumbdrive to once again end up with a locked computer at the Thinkpad Logo screen. I have replaced a couple of other T440 and T540 system boards during this time also with using the same USB maintenance disk thumbdrive used for updating those system's model type/serial number and UUID. So I know the issue is not with the USB thumb drive. I am very frustrated with this system. I hate to keep submitting DOAs for the same system.
Since the BIOS is part of the system board and I have not had these issues with the many T440 system boards I have replaced successfully that performing a BIOS update is not a good excuse why this doesn't work on this particular T440 and since after replacing a system board under "DOA" and updating with the maintenance disk and froze there is not a way I can run a BIOs update on this system now right?
I use a T440 with WIN8.1 pro machine but for whatever reason the external battery has stopped charging. As this laptop is only 3 months old Lenovo send me a brand new one but the outcome was the same, the charge symbol comes up on my screen when rebooting the machine and shortly after stops completely. I have now had my internal battery pack changed and again no improvement.
View 4 Replies View RelatedI have just installed an i7 2670Qm on my T420 today.The machine will crash pretty soon after booting up, with the screen having colorful vertical and horizontal lines before it restarts itself and give the memory error beeping pattern (1 beep-pause-3 beeps-3 beeps-pause-1 beep).So then I took out one RAM from the bottom, and the machine appears to work normally again, more or less.
In the OS (Win7 64), The power manager alerts me that the 65w AC adapter is giving not enough power, so the laptop is running on battery. I thought I just need a 90W AC brick so the laptop will work as it should, so I am arranging a 90w one to come in later. But on a second thought, if the battery cannot start the laptop with 8GB of RAM properly.
Is it the CPU or RAM or Mobo or something else? Where should I look?The machine works fine with the previous CPU i3-2310m and 8GB of RAM.The RAM modules I have are 2 x 4GB Samsung 2Rx8 PC3-12800S-11-11-F3.The BIOS version is updated to the latest 1.46.
I enjoy the feature of automatically powering off the optical drive in power manager. My issue is after reformatting my T530 the option is there until I do an update using the Lenovo ThinkVantage System Update. One of the updates seems to remove the feature from the power manager.
View 8 Replies View RelatedI am using T440. I just upgrade the operating system from windows 7 to windows 8 using recovery disk. I upgrade according to the manual paper in the box.
The issue is, the windows 8 is installed in my HDD with capacity 500GB and the SSD 16GB are not detected. My question is, it should be installed in my 500GB HDD or the SSD drive? What are the correct steps to do recovery if I 500GB HDD and SSD drive?
I have a T440p with a Windows 7 professional 64 bit. I got the same problem: camera light is on, but I can't see any preview but only a crossed camera on a grey background.
Since my operating system is Windows 7, I don't have a "setting app" in my laptop.
Something strange happened on my T440s today when I first turned it on...it booted to windows, then I entered my windows login pin, and then the screen went blank/dark instead of going to the windows 8 tiles. so I closed the lid, and it went to hibernate. and when I opened the lid again the screen came back on and it worked fine.
View 3 Replies View RelatedI use a T440 with Windows 8. External battery not charging. Always 0%. The internal battery is charged to 80%, external battery will not charge. If I disconnect the external battery, the internal charging to 100%. Did fully discharge, it is still only charged internal battery.
View 7 Replies View RelatedI have a T430s with Windows 7 Pro 64-bit that is not entering 30 Day Standby like it should. The issue seems to lie with Power Manager.
Inside of Power Manager I have the 30 Day Standby option checked, just like I should, and it is also reflected in the BIOS setup as well. If I change the BIOS transition time for 30 Day Standby to "Immediately" and start Windows, but don't log in, and put the computer to sleep. It almost immediately wakes up and transitions into 30-day standby.
Now I know that Power Manager has a "hard coded" setting of 3 hours, regardless of the BIOS setting. So after 3 hours, Power Manager will automatically wake up the computer like it would to transfer to 30-day standby, but it just goes back to normal sleep.
Today while on battery, it did this twice (according to the Windows Event Log) Wake up, and go back to Sleep / Standby (S3). In the logs, the wake source is listed as "Unknown" when it goes back to sleep 10 or so seconds later is listed as "Application API".
Like I said, I was running on battery, and I also went into device manager and unchecked anything I could think of that would have an option of "Allow this device to wake the computer". I also disabled the Wake-on-LAN option for the LAN card. Plus I had all USB devices unplugged, as well as no Ethernet cable in the LAN port anyway. Plus it does transition to the 30-Day standby if I force the computer to sleep at the login screen before Power Manager is loaded.
I just wanted to add I should have all driver / software updates as of Dec. 1 or so. I'm running Power Manager 6.63.1 and Power Management Driver 1.67.4.4.
I can't adjust my screen brightness using the Power Manager. Updating to the latest release of the ThinkVantage Communications Utility did not solve the issue. I can't make the screen either brighter or dimmer.
View 3 Replies View RelatedI'm tried hard-booting the device, but no dice. When I push the power button, I show activity in the status lights and can feel heat coming out of the heatsink. I think I see the 'ThinkPad' screen displaying very faintly at that time, but it seems not to proceed through the regular boot process. I'm definitely not able to get to a BIOS post.
View 2 Replies View RelatedI just opened my laptop today, and when I used F1 to unmute, it 'clicked' a sort of odd, plasticky click. I hit it again a few times, and it always clicked. So I took the key off to check. I didn't see anything wrong, no broken plastic. After taking it off and putting it back on a few times, it now only clicks when I apply pressure in the top left area of the key.
View 3 Replies View RelatedHow to enable VT-x on T440s? I tried to enable Security -> Vritualization setting in the BIOS menu. After a cold restart, the virtualization setting stays the same Enabled state, but the Win8.1 doesn't seem to recognized it and CPU-Z shows no VT-x like the image below. The BIOS is the latest, update yesterday.
View 1 Replies View RelatedI just got my new laptop today - but I can't open it to turn it on. My old T61 has a little latch on one side you just flicked and it opened right up. This has two silver things on the front, but I've tried everything and I can't get it to open. I've pressed one, both at the same time, pressed hard, pressed lightly. Been trying to open for over 20 minutes now but it won't budge.
Will I have to send it back solely because I can't open it?
My thinkpad T410 (2537-UQF) with an OCZ Vertex 3 SSD only boots if the power supply is plugged in. If i have full battery and try to boot without the power supply i get a blue screen after being about 60 seconds in the screen where the windows logo appears. I have Windows 7 installed fresh a few days ago.
I think its possible, that i have made some failure with the drivers. The ThinkPad Power Managers always stops working after booting. So i have removed the program by using the "msconfig" functionality.
since the start, the scroll option will sometimes work, and sometimes not... i've written to lenovo (On site warranty) and they switched out my motherboard + touchpad. That didnt work either, sometimes it works fine, but sometimes it just wont react at all?
View 2 Replies View RelatedI just bougth the T440 and I have two main problems related to sleep mode, which both seems to happend randomly.The most common problem is that when I close the lid (the action suppose to activate sleep mode), the computer seems to freeze during the time it is going to sleep : The red light is still on as when the computer is in 'normal mode', but there is no display and the keyboard seems unresponsive. I have no choice but to restart the computer.
Sometimes the computer seems to enter in sleep mode correctly (the red light slowly goes on and off, which according to the manual indicates that the computer is in sleep mode), but when I open the lid, the screen remains black and I can see nothing but the mouse. I have no choice but to restart the computer.
It also happened once that the above problem (the second one) kept occuring even after multiple restart of the computer. The only way I could solve it was by using 'windows safe mode'. As the problems occur randomly, I am unable to say if they were already there when I received the computer, or if they started to happen after the few windows updates/software installation I did.
We currently purchased some T440 20B6-005BUS for our users and are applying our Windows 7 SP1 x64 Enterprise image to them through SCCM (and yes, ExpressCache gets installed). After imaging the first couple we noticed that at idle these laptops sit at 2-2.5GB RAM usage (4GB total in these machines). Thinking it may be something wrong with our image, I created a new gold image and applied it. However, the RAM usage is still very high.
To verify that it wasn't our image I started up another couple T440 out of the box with the Lenovo default image, and sure enough, it's also using 2-2.5GB at idle. It seems that some service(s) in svchost are using the most at idle (around 100-200MB).
I plan on installing Windows 8.1 Enterprise (fresh ISO) just to see if the T440 is just poorly configured for Windows 7, but I don't really expect Windows 8.1 to facilitate much. the T440 (especially 20B6-005BUS).
How to automatically enable CSM Support on ThinkPad models (preferably T440s) during OS deployment? CSM Support is required in order to install Windows 7 on UEFI enabled machines and is desired within my organization in order to be prepared for a migration to newer Windows OS:s later on in the future.
I've been reading through the documentation (sb_deploy.pdf) and the supplied samples found in the link below, but I'm unable to identify the correct setting.
[URL]
I have a wonderful new T440 here and am wishing to load Windows 7 x64 from a bootable usb memory stick, which I've always used and works fine on other computers (tested again this morning).
However when I try to boot my T440 from this drive, I can bring up the temporary boot menu and see the usb drive in the list, but when I select it (press enter) the screen just flashes and comes back to the temporary boot menu. IT will not accept my memory stick!
I tried with another stick with Win7 on , but got the same problem.
Interestingly I also have a X240 here and this behaves exactly the same. So I don't think it is the USB Drive and its not the T440. What can I do.
Just out of interest I was able to boot from a Windows 8 prepared USB drive... which is great but I don't want to load win8, I need to load win7.
I have recieved at work a lenovo t440 notebook, everything worked fine, untill one day I noticed that I cannot conect to the internet via lan cable. I plug in the cable and it is not detected. I checked the cable to another notebook and it was working. I have a Intel Ethernet Connection I218-LM controller, I have re-installed both network drivers from lenovo and intel websites and nothing works. I've tried as well to get automatically from windows update, no result. Went to bios cheked if the lan connection is enabled, everything was in place. Is there anything I missed? I noticed a weird behaviour, if I connect through wireless network, after sometime the lan connection is established and I can use it, but without wireless connection it doesn't work.
View 5 Replies View RelatedI've uninstalled and reinstalled drivers for the camera. It does not work in any application.
I've seen a few threads about this but not 100% if there's been a resolution...
running 8.1 windows
I just got my ThinkPad T530. Things are going ok with it, the keyboard isn't as terrible as I had thought - but certainly didn't wow me like the keyboard on my T510 which I think was the best keyboard any ThinkPad ever had.
Anyway, something I have noticed, and that is sort of a problem for me, is that this computer is not making the typical "power status change" beeps that every other ThinkPad has ever made. You know, the dee-dum, dum-dee that go along with plugging or unplugging the AC power adapter. Also no single beep when it finishes going to sleep, or wakes up from sleep.
How I get these back? I didn't see anything obvious in the BIOS or Power Manager.
I have a T440, and I've set in BIOS to swap places for fn and ctrl. This works great until the machine goes to sleep or similar. After awakening the machine the keys are back to their original setting, with fn being fn, and ctrl being ctrl.
I havent explored this in detail but just found the machine sporadically losing the setting, but never while I'm working on it. So either from sleep or from locked screen.
I always use FnLk as well and that is also lost when this happens. I have to restart to get back the setting for fn-ctrl swap, but FnLk i can just enable,
I run Windows 8.1 on my T440.
Got a new T440 yesterday. Good machine, only a small issue with the Windows 7 System Restore feature that i'm not able to fix:
I wanted to try system restore but it did not work properly. There are numerous system restore points created but i'm not able to revert to one of these restore points. It says Local Disk (Unknown) - The station cannot be found. (Picture in Dutch)
After i received the T440, i created a new partition on the 256GB Samsung SSD. Maybe this is the reason system restore is not working properly?
I already fixed the mbr, but this makes no difference. In the picture below, you can see the partitions. I
only reduced the size of the C: partition and created a new D: partition. The *SYSTEM_DRV, Q: Lenovo Recovery and the *: 7.00 GB partition are not changed at all.
System specs:
Windows 7 SP1 x64
i7-4600U
256GB Samsung SSD
8,00GB Ram