Lenovo ThinkPad W Series :: W530 - Boot Options Are Hidden From External Monitor Until Windows Loads
Apr 22, 2014
I have a training environment using W530 laptops that are enclosed in an area in front of the desks. It is not pratical to get to the computer as it is hidden away and therefore I need to be able to use the dvi cabled external monitor for bios setup, boot order, etc.
Right now the boot options are hidden from the external monitor until windows loads. Then the external monitor becomes active. Any way to bypass the laptop monitor altogether?
View 5 Replies
ADVERTISEMENT
Oct 14, 2012
I can't get past BIOS when my W530 is connected to an external hard drive, in my case a WD My Book Essential 3TB (USB 3.0).
Here are some previous threads I've found:
-W520 hangs on boot when a WD SES USB drive is connected
-W520 won't boot with SES device connected to USB
-W530 stuck or won't boot when WD external drive plugged in.
I would be satisfied if I could disable USB Legacy Support in BIOS and move on, but I can't find that option anywhere on my W530.
Here's what I've tried so far:
-Updated BIOS to the latest version (1.11) and updated WD My Book firmware.
-Changed the port (tried both USB 2.0 and 3.0, powered and unpowered) that the drive is connected to.
-Removed everything except my MSATA drive in boot priority. I can't enter BIOS settings when the WD drive is connected so I can't actually exclude it from the boot priority, but I've tried to enable Boot Order Lock.
-Disabled USB options in BIOS (USB UEFI BIOS Support, Always on USB, etc.).Switched between Quick and Diagnostic boot. With Quick it's stuck at the Thinkpad splash screen, with Diagnostic I just get a black screen.
-Tried with both GPT and MBR partitions styles for the external drive.
-Changed between UEFI and Legacy.Tried it with my friend's Thinkpad T520, wouldn't boot either with the drive connected...
Other information:
My Thinkpad is docked to a Thinkpad Mini Dock Plus Series 3 with USB 3.0 (170W). I haven't bothered to try it undocked, but judging from the other posts it's not likely to fix the issue.
Surprisingly I don't have this issue with my older WD My Book Essential Edition 2.0 1TB (USB 2.0) external hard drive. I don't think it would work to simply remove the drive from boot priority. I've removed my other external hard drive but I can still hear it spinning up during boot (when the Thinkpad splash screen shows up), which suggest that it's still being identified during boot. Is there really no workaround other than "get a different enclosure" or "unplug it when powering on"? Are there any >3TB external hard drives, preferably USB 3.0, that are known to work?
View 9 Replies
View Related
Jan 29, 2014
I run the W530 with a dual boot setup with Windows 7 and a Ubuntu distro, with the Windows as the default one.
Every time I try to boot and there happen to be a memory stick or a drive connected to the computer, it freezes on boot at the Windows logo. If I unplug the memory stick, everything is fine and it boots up normally.
Ive purchased a Thinkpad 12,7 mm SATA HDD Bay Adapter III and a Samsung 840 EVO, 500GB, SSD. Now when I swapped the DVD drive with the new SSD the same freeze happens ever time I try to boot. Ive tried to connect the new SSD to the computer and formatted it beforehand. But it keeps freezing.
Im not sure if this relates to my dual boot setup or what.
View 2 Replies
View Related
Feb 7, 2010
The problems still exist after I do a fresh restore with Lenovo DVDs. Also ran the Lenovo Update & Driver utility.
1. My W530 wont boot or start if I have a External drives plugged in. It stucked at "ThinkPad" screen. I have to unplug the external drive and press/old power button to shut it down. Same thing happened when the laptop is docked.
=> Contacted the technical support today. They told me I have to unplug and plug it back in everytime. I told him that there is a reason I got the dock station so I don't have to unplug and plug my external drive every time.
2. I have no problems booting if thumbs drive plugged in. But it keep "Auto run" everytime I turn on the machine.
I do not have this problem with my W500 and W510.
W530, Intel Core i7-3820, 32G DDR3 RAM, 180G Intel SSD, Windows 7 x64, NVIDIA Quadro K2000M.
View 9 Replies
View Related
Mar 27, 2014
I can extend my W530 Win8.1 display to a Dell monitor via HDMI OR a HP monitor via VGA but not both simultaneously. If I plug in both monitors simultaneously, then the HP goes to sleep and the Dell reproduces the laptop display, with no option to extend.
Is the w530 capable of extending to two monitors? If yes, do I need to get different cables or something?
View 9 Replies
View Related
Dec 14, 2013
I tried multiple different setting in BIOS, and am currently on
(1) Boot display device - Thinkpad LCD
(2) Graphics device - Discrete graphics
(3) OS detection for nVidia Optimus - Disabled
Shown in the screenshot is where things are wierd. With my Asus VG248HE connected via mDP to DP cable, the W530 detects the monitor, but will not allow me to enable it. When I click the white box to enable the monitor, it just thinks for a few seconds and does nothing. After the first time of thinking, it does not do anything when clicked.
View 4 Replies
View Related
Aug 29, 2013
I have a X230 (Dislay ports: VGA DP++). It is in a Port Replicator Series 3 with USB 3.0 (part number 433615W) (Dislay ports: VGA)
For display I have:
Lenovo Thinkvision 22" (no model number on case - 4 years old) 1680x1050 (Dislay ports: VGA DVI)
Benq GL2450 24" (Dislay ports: VGA DVI HDMI)
Numerous cables (DVI<->DVI VGA<->VGA HDMI<->HDMI)
How can I hook both monitors to the X230 for a dual external display (laptop monitor is not used)?
View 3 Replies
View Related
May 19, 2014
I only bought the one link pro to connect my Thinkpad Yoga 2 to my Samsung monitor with WQHD-Display with 2.560 x 1.440 Pixel. Lenovo told me that this is possible. With DVI I only get the maximum 1920 x 1200 which makes round circles look like eggs...
I need the full resolution.
I there any configuration, cable, display port instead of DVI cable?
(I have the newest, best, DVI cable (forgot the specification for high resolution DVI cable, ports)).
View 3 Replies
View Related
Jul 27, 2013
I use the Displaylink dock to connect to an external monitor, but it has suddenly stopped working. The error message said "check connections". I have done so - replaced the digital video cable between dock and monitor with a new one, cycled both dock and monitor on and off several times, but windows can not find an external display.
The Lenovo settings app has been giving me an "updating... " message for 3 days (I have raised a query on that elsewhere) so I can't use that to check out the display problem. I should say the display problem started today, and the "updating.."
View 2 Replies
View Related
Oct 5, 2014
I am new to the W540 and I am having problems closing my lid without disconnecting the external monitor
- Using VGA port
- Lid set to do nothing
- Ext monitor cloned
What am I missing ?
If I close the lid, my external goes blank
From a restart or a log on...
close lid - ext goes blank - sound is muted
open lid - un mute sound - close lid - ext works Is that normal ?
whenever I come to this forum I get auto loggred off - Paswword glitch (note: if you uninstall password manager remember to delete extension in chrome)
View 2 Replies
View Related
May 27, 2014
I've just been handed a new W540 to be rebuilt as Win7 x64 via SCCM.
How do I access the boot options to select PXE?
I've use X220 and X230's before and they have a button to access boot options.
Tried F12 and Fn +F12,but it just boots into Win 8.
View 4 Replies
View Related
Dec 22, 2012
I bought my W530 with Windows 7 preinstalled and an option to upgrade to Windows 8, which I did immediately before installing any programs. When I now try to upgrade to Windows 8.1 I get a message asking me to previously uninstall RapidBoot. However I cannot find RapidBoot on this machine. How can I uninstall it?
View 6 Replies
View Related
Dec 20, 2013
Basically I am trying to install a new Samsung SSD into a W530, however, I can not get the Bios or Windows instalation to see it (when you select what drive you want to install windows on).
I can externally attach the SSD to my other laptop and see the drive. I can create partitions, format them, etc. But none of that worked my original issue.
I have also updated to the latest BIOS version, tried turning off UEFI, no luck.
What I am missing here to get this SSD to show up?
View 2 Replies
View Related
Dec 18, 2012
After receiving my w530, I wiped the drive and installed a nice fresh copy of Windows 8 Enterprise (volume licence work copy).
I have installed all the latest drivers, etc. and taken note of the various documents about Windows 8 upgrade/install, but cannot make use of the integrated camera?!
The driver is listed under the device manager:
Imagine Devices -> Integrated Camera (Ricoh 1.0.0.19) - BTW I tried the beta one to see if that worked, and it made no difference to I rolled back to the proper release again.
The docs I have read said NOT to install the Communications Utility, and at this point in time there is not a Windows 8 listed compatible version of that. I did give it a try when the camera did not work, but although there were no errors, etc. it didn't work either ...
Skype/messenger/windows 8 camera seem to know it's there, but cannot make use of it (I get the placeholder image).
Under Control Panel->Hardware and Sound, there is no appropriate entry for me to toggle/configure.
I see the green light come on, but no picture. Running latest bios G5ET65WW (2.07).
View 9 Replies
View Related
Aug 31, 2008
I use a high resolution monitor; therefore, I use display scaling. But for many programs I prefer to turn it off since the display quality is better. For 32-bit programs there is no problem with this: open program properties, then, Compatibility => Disable display scaling on high DPI settings. However, when I try to do this for a 64-bit program, I find that the corresponding check box is disabled.
View 1 Replies
View Related
Nov 26, 2011
I have a W530 with win 7 64 bit installed. Some time ago I mistakenly uninstalled Hotkey Features Integration for Windows using the windows 7 control panel.
I would like to install it again. [URL] ....
Thinkpad W530 2436 CTO, BIOS Version LENOVO G5ET95WW (2.55 ),Intel Core i7 3630QM, 2.4 GHZ,8MB, WIN 7 Pro 64 bit,1600x900 HD, Intel HD 4000, NVIDIA Quadro K2000M,16GB RAM, Samsung 250 GB SSD
View 5 Replies
View Related
Jan 23, 2014
W530
Product: 244752U
BIOS: G5ET95WW (2.55 )
Windows 8.1 - Installed from scratch.
I was able to install and configure all drivers but one. I found a tread that suggested installing Lenovo Setting Dependency Package 2.0.0.13 to fix it on a different lenovo model. I tried it without any success.
The driver id of unknown driver is "{48126E0D-4BDD-4D26-8A24-569C7AB522D6}SettingsDriver"
View 3 Replies
View Related
Feb 19, 2008
I have 2 identical ThinkPad W530 laptops model 244723G
Both are set to discrete graphics from BIOS because with optimus driver my projector will not work at all.
But how i have other issue that causes BlueScreen when connection laptop to projector.
I have installed latest driver from Lenovo download site -> still BSOB when connecting to projector.
When i install driver from Nvidia site it fixes BSOD issue with discrete graphics and external projector.
Confirm that there is a error on Lenovo optiomus driver when using discrete graphics?
View 9 Replies
View Related
May 29, 2014
I have a Lenovo ThinkPad W540 running Windows 8 (64 bit) connected to a ThinkPad Pro docking station and hooked up to a 24" widescreen monitor.
All was working perfectly for the past couple of days (since I got it) until today when the monitor will go blank, display a 'no signal' message, the laptop screen will flicker then after approx 15 seconds all is back to normal excepting the following message is displayed:-
I've tried clicking Yes and No with no permanent lasting improvement!!
View 2 Replies
View Related
Jul 21, 2014
For various reasons, I had to perform a complete reinstall of Windows 8.1 on my W530. Now, after updating the system with the Lenovo System Update app, all the icons on the desktop (laptop screen, not external) are considerably larger than before the resintall. This includes the task bar, etc.. as a matter of fact, it appears that I've lost a lot of real estate within apps as well, and everything generally appears to be 'fat'.
I have the screen resolution set to 1920 x 1080.
I am using the Intel HD Graphics 4000 driver dated 5/16/2014.
Interestingly enough, upon first boot from the rebuild (before the System Update updates) the screen was exactly as it was before. I did try to downgrade the driver to the built-in MSFT driver.. but that didn't accomplish anything.
I've attached a screen shot for those bored enough to care : Link to image
View 7 Replies
View Related
Jan 8, 2013
I got a thinkpad w530 with Windowd 8 from the factory and its ultrabay worked really well. I use a few SSDs in the ultrabay and used to swap through them by just ejecting the one currently in use and plugging in another one. However, since Wondows 8.1 update I haven.t been able to do so, as I have to turn off the machine and change the drives.
I believe it has something to do with the OS set up. How to enable the hot swapping capability of the ultrabay?
View 6 Replies
View Related
Oct 21, 2013
Windows 8 came with this machine, and I have had performance issues for a month now. I have just soldered on till yesterday when I kept getting different blue screens and needing to restart...now it won't restart, and so I did the press enter to get to the troubleshooting area of the hard drive....selected the quick reset option, which failed, so I came back and selected the complete reset and it gets to about 65% and stops says there was an error and requiring a restart...this happened twice...now when it restart, it is trying to do a reset again...without me asking it to.
Is this normal? Normally I physically break a computer, and never get to the point where a reset is needed...so I am truly at a loss here.
It is a W530 and has 16GB of RAM. All I run/ran on it photoshop and Lightroom, Firefox, audacity, Roxio, Avast for virus protection, an online backup service, and a program called star stacker.
View 4 Replies
View Related
Nov 5, 2014
Is it possible to replace FHD TN matrix on an W530 (B156HTN01_1) with any good IPS matrix?
I'm really disappointed with viewing angles and colours.
View 1 Replies
View Related
Sep 20, 2012
Is there the ability to disable the touchpad on the W530? I don't see it as an option in the function keys. I am using a mouse and it's a bit annoying brushing my hand against it and having it mess something up.
View 6 Replies
View Related
Dec 13, 2013
I am looking to update my laptop used for photography. The ideal replacement looks to be the ThinkPad W530 with a dock and display screen. As the W530’s will be used away from home it and monitor will need to be calibrated.
I have been told I can only do this if the graphics card, NVIDIA Quadro K2000M, supports has more than one LUT to both laptop and stand alone monitors be calibrated.
View 2 Replies
View Related
Oct 23, 2012
I have had the W530 for several months now and it randomly powers off. This can occur when connected to the AC Adaptor, when running on battery, or when using the AC Adaptor without battery. Lenovo first replaced a fan, but that didn't solve. Now they are attempting to replace the system board.
W530, i7-3610QM, 1920x1080 FHD, 16 GB RAM, K2000 NVIDIA GPU, Muskin mSATA, 500GB 7200rpm, Bluetooth, Centrino 6300 AGN WiFi, Win8 Pro
View 9 Replies
View Related
Feb 28, 2013
I installed some Corsair Ram in slot 1 and 2 underneath the keyboard and after reinstalling the keyboard Ive noticed theres a gap at the top of the keyboard where it slots into the computer the whole way across specifically in the middle where theres alot of flex. The plastic which has the power and volume buttons seems to move around when pressed. This seems to be letting in dust and would especially allow a spill to enter the machine. This doesn't seem normal for a well built machine and have I installed the keyboard wrong?
View 9 Replies
View Related
Aug 9, 2014
I have a W530 (2436 CTO) ThinkPad purchased 11/10/13. It will not power up.While in use the screen went black, then the unit tried to reboot. Just as Windows began to initiate, the screen went black again. It immediatly tried to restart about three times in quick succession, about 3 seconds long each time. It was powered with the AC adapter at the time with the battery in place. I have tried all combinations with or without the battery or AC. In either mode, the power button lights up for approximately 1-2 seconds, then goes black. I have tried holding in the power button for 30 seconds. Nothing, other than about a 2 second light, then dead.
I have never received any power warning messages, low battery warning or the like. The only unusual behavior I've ever had is about half a dozen times I've had to do a hard power down. But not recently.I have tried the removing and replacing the SSD. I have removed and switched the two memory boards to test for a bad board or bad connector. None of these have solved the problem. I’m guessing the SSD failed, or perhaps a bad BIOS chip. I can easily replace the SSD, but 9 months of moderate use seems like a short lifespan for even an SSD. I can't update the BIOS (if that's the issue) because I can't get the unit powered up.
View 3 Replies
View Related
Apr 17, 2010
What type of screen is in a W530?
I have an FHD (I think) but when it comes to calibration I have the following options
CCFL
Wide gaumet CCFL
White LED
Red LED
OLED
Plasma
RG Phosphor
View 3 Replies
View Related
Jun 30, 2011
First, am I correnct in assuming all W530 will have bluetooth? Second, how does one enable it?
I can't see it under device manager. I don't see it when I do fn-F5. I have efi with win 8 with all metro features removed/disabled.
If I dont have bluethooth, can I transplant it from my W520 ...
View 7 Replies
View Related
