Lenovo ThinkPad W Series :: W530 - Windows 8 And Integrated Camera
Dec 18, 2012
After receiving my w530, I wiped the drive and installed a nice fresh copy of Windows 8 Enterprise (volume licence work copy).
I have installed all the latest drivers, etc. and taken note of the various documents about Windows 8 upgrade/install, but cannot make use of the integrated camera?!
The driver is listed under the device manager:
Imagine Devices -> Integrated Camera (Ricoh 1.0.0.19) - BTW I tried the beta one to see if that worked, and it made no difference to I rolled back to the proper release again.
The docs I have read said NOT to install the Communications Utility, and at this point in time there is not a Windows 8 listed compatible version of that. I did give it a try when the camera did not work, but although there were no errors, etc. it didn't work either ...
Skype/messenger/windows 8 camera seem to know it's there, but cannot make use of it (I get the placeholder image).
Under Control Panel->Hardware and Sound, there is no appropriate entry for me to toggle/configure.
I see the green light come on, but no picture. Running latest bios G5ET65WW (2.07).
View 9 Replies
ADVERTISEMENT
Sep 10, 2014
Im using X220 with Windows 8.1 Pro. Under Fn + F6 i have TouchPad, Wireless, Battery, Audio
I installed:
- Lenovo Power Management Driver 1.67.04.05
- Lenovo Settings Dependency Package 2.2.0.28
- Lenovo Solution Center 2.4.003.000
- Lenovo System Update 5.06.0016
- On Screen Display 6.71.00
- Ricoh_media_driver_v2.22.18.01
- ThinkPad UltraNav Driver 16.2.19.14
- ThinkVantage Active Protection System 1.79.00.03
And from Microsoft Store:
- Lenovo Settings - which run when i hit fn+f6
Non of driver updater find the built-in camera, same with Deviace Manager. Lenovo System Update dont download any camera related software. I understand that somekind of driver need to be installed to be able to turn on the camer. But non i found activate it.
From what I read it should be in Lenovo Settings with Audio settings, but sadly nothing there.
When I start the build in app "camera" from Windows, it tells me there is no atached camera.
Those are the Lenovo x220 related installed application that showed up in Add/Remove Software.
Sadly the only camera driver from Lenovo page which is: Integrated Camera Driver for Windows 7 (32-bit, 64-bit), Vista (32-bit, 64-bit), XP - ThinkPad , doesn't work.
View 9 Replies
View Related
Oct 9, 2014
I have a Lenovo Thinkpad x201 laptop and I cannot get the integrated camera to turn on independent from Skype. It definitely works, I have used it several times with Skype, but I can't figure out how to turn it on outside of Skype. I have tried the Fn+Esc and the Fn+F6 things, and quite frankly I'm not even sure if it applies to x201 laptops, but its definitely not working for mine. My laptop is refurbished and i just got it recently.
View 3 Replies
View Related
Sep 28, 2014
I've been looking for a way to activate and capture and image from the integrated camera from the command line. Anyway to do that? I have a W530 with 64-bit Windows 7.
View 3 Replies
View Related
Oct 19, 2012
I got my thinkpad T530 last week. I tested the skype after opening the box and it works. Then I took off the original 320G HDD and put my 830 SSD on it, reinstalled the win8.Just last night when I tried to chat with my parents on skype i found out the the camera is dead. I tried by doing so:
1) according to others threads I uninstall most of the unnecessary drivers;
2) reinstall the camera driver;
3) deleted the ricoh media driver;
4) updated the BIOS;
5) tired to locate someone mentioned, the "privacy" problem. But the video/camera option is not even showing up by Fn+F6;
6) downloaded and installed the thirdparty AMCAM and it says no camera device can be found.
View 9 Replies
View Related
May 28, 2013
I have a brand new T530 running Windows 8 and the integrated camera will not work straight from the factory. I'd like to think this would have been tested from the factory; what should I be looking for?
View 6 Replies
View Related
Dec 7, 2012
I bought my ThinkPad T530 laptop in August of this year and about a month ago I used the Lenovo ThinkVantage updater and it updated the driver for my web cam. Ever since then it has stopped working.
Whenever I open the web conferencing menu, it only shows options for the microphone, and nothing for the camera. I have tried hitting Fn+F6 and accessing it via other software e.g. Skype, Oovoo, Picasa. And they say that my webcam cannot be detected.
When I checked for the webcam in device manager it said it was installed and working properly, and that the driver was up to date. I went to the lenovo website and downloaded the driver for the camera from there (g1ca16ww) and tried to update the driver manually hoping that that would fix the problem. Alas, it did not. I also checked the BIOS settings to make sure that the camera was enabled. It was.
So then I tried to reinstall the driver by uninstalling it, and using the driver I downloaded from the Lenovo website to reinstall. It installed properly, but now the webcam is no longer listed in the hardware manager and the dropdown for Imaging Devices, where it was located before, is no longer visible. I also rechecked the BIOS menu to make sure the camera was still listed there and it is. I do not know why it isn't working. I have also tried system restore and that didn't work either, the device still isn't listed. I don't want to have to wipe my computer.
View 9 Replies
View Related
Dec 22, 2012
I bought my W530 with Windows 7 preinstalled and an option to upgrade to Windows 8, which I did immediately before installing any programs. When I now try to upgrade to Windows 8.1 I get a message asking me to previously uninstall RapidBoot. However I cannot find RapidBoot on this machine. How can I uninstall it?
View 6 Replies
View Related
Dec 20, 2013
Basically I am trying to install a new Samsung SSD into a W530, however, I can not get the Bios or Windows instalation to see it (when you select what drive you want to install windows on).
I can externally attach the SSD to my other laptop and see the drive. I can create partitions, format them, etc. But none of that worked my original issue.
I have also updated to the latest BIOS version, tried turning off UEFI, no luck.
What I am missing here to get this SSD to show up?
View 2 Replies
View Related
Aug 31, 2008
I use a high resolution monitor; therefore, I use display scaling. But for many programs I prefer to turn it off since the display quality is better. For 32-bit programs there is no problem with this: open program properties, then, Compatibility => Disable display scaling on high DPI settings. However, when I try to do this for a 64-bit program, I find that the corresponding check box is disabled.
View 1 Replies
View Related
Nov 26, 2011
I have a W530 with win 7 64 bit installed. Some time ago I mistakenly uninstalled Hotkey Features Integration for Windows using the windows 7 control panel.
I would like to install it again. [URL] ....
Thinkpad W530 2436 CTO, BIOS Version LENOVO G5ET95WW (2.55 ),Intel Core i7 3630QM, 2.4 GHZ,8MB, WIN 7 Pro 64 bit,1600x900 HD, Intel HD 4000, NVIDIA Quadro K2000M,16GB RAM, Samsung 250 GB SSD
View 5 Replies
View Related
Jan 23, 2014
W530
Product: 244752U
BIOS: G5ET95WW (2.55 )
Windows 8.1 - Installed from scratch.
I was able to install and configure all drivers but one. I found a tread that suggested installing Lenovo Setting Dependency Package 2.0.0.13 to fix it on a different lenovo model. I tried it without any success.
The driver id of unknown driver is "{48126E0D-4BDD-4D26-8A24-569C7AB522D6}SettingsDriver"
View 3 Replies
View Related
Feb 19, 2008
I have 2 identical ThinkPad W530 laptops model 244723G
Both are set to discrete graphics from BIOS because with optimus driver my projector will not work at all.
But how i have other issue that causes BlueScreen when connection laptop to projector.
I have installed latest driver from Lenovo download site -> still BSOB when connecting to projector.
When i install driver from Nvidia site it fixes BSOD issue with discrete graphics and external projector.
Confirm that there is a error on Lenovo optiomus driver when using discrete graphics?
View 9 Replies
View Related
May 29, 2014
I have a Lenovo ThinkPad W540 running Windows 8 (64 bit) connected to a ThinkPad Pro docking station and hooked up to a 24" widescreen monitor.
All was working perfectly for the past couple of days (since I got it) until today when the monitor will go blank, display a 'no signal' message, the laptop screen will flicker then after approx 15 seconds all is back to normal excepting the following message is displayed:-
I've tried clicking Yes and No with no permanent lasting improvement!!
View 2 Replies
View Related
Jul 21, 2014
For various reasons, I had to perform a complete reinstall of Windows 8.1 on my W530. Now, after updating the system with the Lenovo System Update app, all the icons on the desktop (laptop screen, not external) are considerably larger than before the resintall. This includes the task bar, etc.. as a matter of fact, it appears that I've lost a lot of real estate within apps as well, and everything generally appears to be 'fat'.
I have the screen resolution set to 1920 x 1080.
I am using the Intel HD Graphics 4000 driver dated 5/16/2014.
Interestingly enough, upon first boot from the rebuild (before the System Update updates) the screen was exactly as it was before. I did try to downgrade the driver to the built-in MSFT driver.. but that didn't accomplish anything.
I've attached a screen shot for those bored enough to care : Link to image
View 7 Replies
View Related
Jan 8, 2013
I got a thinkpad w530 with Windowd 8 from the factory and its ultrabay worked really well. I use a few SSDs in the ultrabay and used to swap through them by just ejecting the one currently in use and plugging in another one. However, since Wondows 8.1 update I haven.t been able to do so, as I have to turn off the machine and change the drives.
I believe it has something to do with the OS set up. How to enable the hot swapping capability of the ultrabay?
View 6 Replies
View Related
Apr 22, 2014
I have a training environment using W530 laptops that are enclosed in an area in front of the desks. It is not pratical to get to the computer as it is hidden away and therefore I need to be able to use the dvi cabled external monitor for bios setup, boot order, etc.
Right now the boot options are hidden from the external monitor until windows loads. Then the external monitor becomes active. Any way to bypass the laptop monitor altogether?
View 5 Replies
View Related
Dec 29, 2012
why the Windows 8 camera app show the camera with a slash across it instead of an image?
I also tried the manycam app and same behavior is noticed. Is the camera bad? I checked the driver version it is the latest that is on the Lenovo Site for Windows 8.
View 9 Replies
View Related
Oct 21, 2013
Windows 8 came with this machine, and I have had performance issues for a month now. I have just soldered on till yesterday when I kept getting different blue screens and needing to restart...now it won't restart, and so I did the press enter to get to the troubleshooting area of the hard drive....selected the quick reset option, which failed, so I came back and selected the complete reset and it gets to about 65% and stops says there was an error and requiring a restart...this happened twice...now when it restart, it is trying to do a reset again...without me asking it to.
Is this normal? Normally I physically break a computer, and never get to the point where a reset is needed...so I am truly at a loss here.
It is a W530 and has 16GB of RAM. All I run/ran on it photoshop and Lightroom, Firefox, audacity, Roxio, Avast for virus protection, an online backup service, and a program called star stacker.
View 4 Replies
View Related
Nov 5, 2014
Is it possible to replace FHD TN matrix on an W530 (B156HTN01_1) with any good IPS matrix?
I'm really disappointed with viewing angles and colours.
View 1 Replies
View Related
Sep 20, 2012
Is there the ability to disable the touchpad on the W530? I don't see it as an option in the function keys. I am using a mouse and it's a bit annoying brushing my hand against it and having it mess something up.
View 6 Replies
View Related
Dec 13, 2013
I am looking to update my laptop used for photography. The ideal replacement looks to be the ThinkPad W530 with a dock and display screen. As the W530’s will be used away from home it and monitor will need to be calibrated.
I have been told I can only do this if the graphics card, NVIDIA Quadro K2000M, supports has more than one LUT to both laptop and stand alone monitors be calibrated.
View 2 Replies
View Related
Oct 23, 2012
I have had the W530 for several months now and it randomly powers off. This can occur when connected to the AC Adaptor, when running on battery, or when using the AC Adaptor without battery. Lenovo first replaced a fan, but that didn't solve. Now they are attempting to replace the system board.
W530, i7-3610QM, 1920x1080 FHD, 16 GB RAM, K2000 NVIDIA GPU, Muskin mSATA, 500GB 7200rpm, Bluetooth, Centrino 6300 AGN WiFi, Win8 Pro
View 9 Replies
View Related
Feb 28, 2013
I installed some Corsair Ram in slot 1 and 2 underneath the keyboard and after reinstalling the keyboard Ive noticed theres a gap at the top of the keyboard where it slots into the computer the whole way across specifically in the middle where theres alot of flex. The plastic which has the power and volume buttons seems to move around when pressed. This seems to be letting in dust and would especially allow a spill to enter the machine. This doesn't seem normal for a well built machine and have I installed the keyboard wrong?
View 9 Replies
View Related
Aug 9, 2014
I have a W530 (2436 CTO) ThinkPad purchased 11/10/13. It will not power up.While in use the screen went black, then the unit tried to reboot. Just as Windows began to initiate, the screen went black again. It immediatly tried to restart about three times in quick succession, about 3 seconds long each time. It was powered with the AC adapter at the time with the battery in place. I have tried all combinations with or without the battery or AC. In either mode, the power button lights up for approximately 1-2 seconds, then goes black. I have tried holding in the power button for 30 seconds. Nothing, other than about a 2 second light, then dead.
I have never received any power warning messages, low battery warning or the like. The only unusual behavior I've ever had is about half a dozen times I've had to do a hard power down. But not recently.I have tried the removing and replacing the SSD. I have removed and switched the two memory boards to test for a bad board or bad connector. None of these have solved the problem. I’m guessing the SSD failed, or perhaps a bad BIOS chip. I can easily replace the SSD, but 9 months of moderate use seems like a short lifespan for even an SSD. I can't update the BIOS (if that's the issue) because I can't get the unit powered up.
View 3 Replies
View Related
Apr 17, 2010
What type of screen is in a W530?
I have an FHD (I think) but when it comes to calibration I have the following options
CCFL
Wide gaumet CCFL
White LED
Red LED
OLED
Plasma
RG Phosphor
View 3 Replies
View Related
Jun 30, 2011
First, am I correnct in assuming all W530 will have bluetooth? Second, how does one enable it?
I can't see it under device manager. I don't see it when I do fn-F5. I have efi with win 8 with all metro features removed/disabled.
If I dont have bluethooth, can I transplant it from my W520 ...
View 7 Replies
View Related
Jul 14, 2013
I purchased the W530 with the 120GB SSD option. Windows 7 takes up more space than I had expected, and now I'm looking to increase the amount of memory on my laptop.
Will buying the hard drive bay adapter from Lenovo and another HDD do the trick?
Product that I'm looking at: [URL] .....
View 5 Replies
View Related
Mar 1, 2014
I recently acquired a new Thinkpad W530 with Windows 7 Pro.
I want to immediately replace the 500gb main drive with a larger one. I plan to do this by imaging the system partition of the current drive to an external USB hdd, and then then writing the image to the larger one after it's installed in the W530.
My question: Can I then just store the original drive away as is, to use for recovery (should the need arise), in lieu of creating recovery media now?
It seems pretty clear the answer should be "yes," but since I've always used XP up until now I'm wondering if there are any kinds of Win 7-specific watchouts (maybe licensing-rleated?) that would keep things from being as simple as popping the original drive back in the main hdd slot to get things back to exactly where they are today?
View 1 Replies
View Related
Mar 18, 2014
All, I am having a major problem with VMWare and the W530 "Num Lock". When I move the cursor into the VMWare window a message comes on say "NUM LOCK: ON" when I move it out of the VMWare window I see message "NUM LOCK: OFF". I do not have any key on the keyboard to disable Num Lock. There are utilities I can run in the SUSE VMWare image to capture the key binding and remap, but I do not have anyway of turning Num Lock on or off to capture the key binding.
View 3 Replies
View Related
