I have recently bought a Flex 2 15 and want to instal Win 7. I created a bootable Win 7 usb stick with the tool from Microsoft and it works just fine. The problem is, no matter what I change in Bios or Boot manager, The laptop doesn't boot from usb. All I get is the normal Win 8.1 installation.
View 1 RepliesI just got my lenovo yoga 3 pro, and started removing what I thought was bloatware, but I'm guessing I removed something important. Now, the keyboard/mousepad doesn't disable when I'm in tablet/stand/tent mode.
View 6 Replies View RelatedA couple of days ago, and quite some time after the latest BIOS upgrade I noticed that under windows the keyboard and mouse on a unified receiver wouldn't work anymore. I normally use Linux and didn't notice the malfunction because Linux does find the USB and enables it (as seen in logs) and they work.
First I thought it's some weird Windows driver issue but the thing that is different is that when booting (grub) or in BIOS - the keyboard and mouse don't work there as well indicating that apparently BIOS doesn't enable it at boot.
I am now not sure whether the BIOS upgrade did this or something else. Since it works under Linux I can hardly consider it as a hardware problem.
What works under Windows anyway is charging USB devices - so apparently something comes through that port.
When i boot the computer to windows, a message pops up saying that i have to not charge the battery up to more than 70%.
It's says that i have to set up something in power consumption options but when i went there i didn't see something relevant to the battery lifespan(in french). Kow to set this up ? between i'm always on the sector (AC).
Yoga 13 bought in 2012. Was working fine with 128 GB / 4 GB. Tried adding another SSD and 8 GB RAM (Crucible), and now I get the message "Default Boot Device Missing or Boot Failed. Insert recovery media and select any key."
I went through the bios and Information says "Hard Disk: Not Detected". Have tried F9 factory reset. No response. What else can I do?
I wanted to do a fresh install but my restore files are in Windows 8 and I wanted 8.1. I used my 8.1 pro disk and created a bootable media for installing using USB. I had to go into the BIOS and change it to legacy before it would see the USB drive. Went ahead and deleted all the partitions then created a single new one for windows. The installation worked flawlessly then I went ahead with the driver installs.
The very first driver was the firmware update. The system updated the firmware without any issues but once it rebooted I only receive the following message "Default Boot Device Missing or Boot Failed. Insert recovery Media or hit any key. The select 'boot manager" to chose a new boot device or to boot to recovery media. When I go hit any key it leaves me with no boot options probably due to them being legacy options. I've tried F2 on startup to get into the bios and change it back to legacy but this never works.. I have also tried F12 trying to get it to let me select the startup drive.
I have a Yoga 3Pro.... I booted into Safe Mode and now ever time I boot up it goes into SF without me hitting F8? What's going on? It's on my Y3P. What box did I click to cause this.
View 5 Replies View RelatedI have a severe problem (I guess) after the latest BIOS Update. Windows 7 freezes during startup.
I own a 64-bit Lenovo FLex 2 15D with AMD A6-6310 and R4, 4GB RAM and a SSHD (8GBSSH). I purchased it without OS and installed Windows 7 - which worked fine so far.
I yesterday updated the BIOS with version 9FCN23WW (for Win7 and Win8), the latest BIOS update. A mistake, it seems.
After Reboot, I first had to disable Secure Boot in the BIOS, because it would not let me boot at all. I figured out how to get into the BIOS-Setup to disable this (press Enter 2x, press Tab when in the Boot Menu to access the "Apps Menu", then "SETUP").
Now Win7 begins to start up, but freezes during the startup process (the splash screen with the win flag freezes and looks a bit strange. I used the "protected mode" Windows Startup and saw that the process always hangs when loading "amdkmpfd.sys".
That is basically it.I guess I have to find a way to re-install the previous version of the BIOS.
Now about what I did to fix this (poor, but I tried):
If I try to start from a Win7 installation CD-ROM (actually it is one for Dell PCs, but I guess that is not the problem) and press a key to boot from CD, Windows loads files, shows "Starting Windows" and at a certain point again just freezes. When I -do not- press a key, WIndows Boot Manager shows up and mentions that "Windows failed to start (etc.)" "File: EFIMicrosoftBootBCD" "An Error occurred while attempting to read the boot configuration data."
I can't even boot into Linux on a USB stick, because the Windows "Error Recovery" won't let me when I try (just offers to boot to Win7 in protected mode - it could be that it fails immediately and jumps back to Win Startup).
I just bought a brand new yoga 2 11 only 10 days ago. I used it this afternoon, closed it up and walked away for a couple hours. This evening I tried to wake it up, and it's stuck on the Lenovo screen. After a while, it said Preparing automatic repair. It spun for 10 minutes and the screen went black. I forced shutdown and walked away, completely frustrated. Now if I try to reboot, all I see is the Lenovo screen. Nothing is happening. What can I do?!
View 3 Replies View RelatedI have the Y510P with Windos 8.1, latest graphic drivers. I'm connecting it to my HD TV via HDMI and the image doesn't fit well in my TV, it's a little zoomed in. I've been searching for a solution in all the menus from Intel's HD 4600, nVIDIA's Control Panel, Windows scaling... NOTHING works. I have another laptop and it has an option that scales the image and the TV shows what is supposed to show.
How can I solve that and fit what I see in my laptop's screen in the second screen (TV)?
My laptop: Lenovo Y510p, Intel Quad-Core i7-4700MQ up to 3.4GHz, Intel HD Graphics 4600, nVIDIA GeForce GT 755M 2GB GDDR5, 8GB RAM, 15.6" Full HD, 1TB 5400rpm HDD + 24GB SSD M.2 (cache), Intel Wireless-N 7260, 72Wh
I am working a lot in one place, charger always plugged in.
just to save the battery life...can you run it without it?
I have a Yoga 2 Pro. I pressed the Fn and the +(plus) key to increase some text size. How do I reverse this?
View 3 Replies View RelatedWell, didn't check before installing Macrium Reflect Professional but it detected 7 (seven) partitions in my Yoga2 13 (Not Pro) as follows:
1 - WinRE_DRV 1GB total 313MB used - NTFS Primary
2 - System_DRV 260MB total 28.5MB used - FAT32(LBA) Primary
3 - LRS_ESP 1GB total 497MB used - FAT32 (LBA) Primary
4 - NONE Unformated Primary (?)
5 - Windows OS 422GB total 44.58GB used (C NTFS Primary
6 - Lenovo 25GB total 2.46GB used (D NTFS Primary
7 - PBR_DRV 15.75GB total 12.46GB used NTFS Primary
All Yoga2 13 are like that from the factory or Macrium created some of them? If they are like that from the factory what each of the partitions have inside (other than, obvlously, the #5 Windows.)
In creating an image for restore in case one is needed which ones I should include in the image?
Is there any way to boost volume on Yoga 13?? I have my system volume and video player volume maxed out and it's STILL not loud enough. No it doesn't have anything to do with what I'm watching, and no, nothing to do with the player. Windows Media, VLC, and Divx have been tried.
View 4 Replies View RelatedI bought a Lenovo yoga 13 a couple days ago. the yoga freezes 1-2 times per day. the Screen Shows the frozen application, the Keyboard, touchpad or mouse didnt Response.
I watched into the logfile and DptfPolicyLpmServiceHelper is the last entry before the Crash. I uninstalled the Dynamic Platform and Thermal Framework, but it doesn't work....
I purchased a new Flex 2-15 online the past week. The model name shown on the back is "20405". Manufacture date is May 12, 2014. The User Guide refers to a "Novo Button", which is shown in diagrams as being on both the left edge and the right edge near the front. Neither location has a button of any sort. The right edge has a pinhole in the supposed button location. A curved arrow icon is next to the pinhole. I have an inkling this may be some sort of factory reset button. Lacking the Novo button, what is the procedure for accessing the features which the manual says are accessed by pressing this non-existent button?. That is, BIOS, and/or the one touch image backup/restore system?
View 7 Replies View RelatedI got my new Yoga Pro 3 and it is looking and working great except from the two fingers tap which does not. This is a real bummer since I use it all the time on my mac and Asus devices.
View 9 Replies View RelatedI´ve got a problem when I connect the yoga 2 pro with my TV (8 year old sony, full hd) with HDMI. The picture doesn´t fit into the screen, it is too big. I tried changing the resolution of both yoga and tv and at the Intel graphics driver I can´t change the scaling option. H
View 4 Replies View RelatedI paid $60 just for some recovery discs to recover my accidentally formatted Yoga 2 Pro. The discs came with no instructions whatsoever, and using them is weird. First of all, there is two disc 1's, no disc 2, yet there is a disc 3 and 4. Support confirmed this is normal. There is also no prompt between discs 1,1, and 2, so despite making my best guess at when to switch, I can't confidently say I'm not screwing things up.
After the whole process completes, the bios can't find bootable media.
I had bought yoga 2 pro from Malaysia three weeks back. And I had traveled back to India last week.The PC was working fine till yesterday. Yesterday while I was working suddenly the system hangs and I had to hard reset. But after that the system didn't boot up. It shows boot device not found. I have switched it off and tried booting using restore button and opened the bios it shows that HDD not detected.
Similar kind of issue I faced two times before but if I hard boot again it worked fine.
I just had my Yoga 13 for about two months and really liked it. Upped RAM to 8GB and added the second SSD. Sweet.
But now I managed to nearly brick my nice little Yoga by spilling juice all over it, and now I am in recovery process.
I checked the original mSATA SSD on another machine, and it looks like it still works fine, all partitions are still there.
In the very beginning after first "drying" the Yoga I got it to boot a couple of times. But now all I get is "Default Boot Device Missing".
Next thing I'll try is putting the SSD in an external USB enclosure and try and boot from there.
Where I can get the windows 7 Drivers for the Yoga 11s. After a format and clean install of windows 7 i have a bunch of yellow bangs in device manager?
View 4 Replies View RelatedI just got the Yoga 2 Pro and it seems like a great laptop / tablet. I have one big problem: the touchpad is near-unusable for me. It seems like I'm constantly activating the switch app gesture and just cannot use it.
How do I turn off all of the gestures on the touchpad so that it just functions like a normal mouse????
I've got a Yoga 11s which is barely a few months old and hasn't seen much use. Having the same problem - it won't power on or charge (powers on only when plugged in). In Lenovo Energy Manager battery status shows "Good" and charging status shows "Battery Connected". WIndows power management icon however, shows Plugged-in, not charging. Never had that problem before either, but it came with the power-on failure so I guess they're related.
View 5 Replies View RelatedI cannot get the Y2P to shutdown or sleep. When I try to shut down it powers off but after about 2 seconds it turns itself back on and boots up. Same thing happens when I try to sleep.I've tried pretty much everything I could find online including the following:
-Turn off wake on lan on the network adapter
-Turn off auto restart on windows errors
-Updated bios
-Updated drivers
-Disabled all non microsoft services
-Factory reset of the OS
Went through every device in device manager and turned off "Allow this device to wake the computer"powercfg /lastwake (shows nothing).Shutting down isn't a huge deal as holding down the power button will eventually turn it off. But not being able to sleep the laptop when I close the lid is a deal breaker as the battery constantly drains.
I just got the Yoga 2 Pro, I also have an older Thinkpad 65W 20V AC adapter with a ThinkPad Slim Power Conversion Cable, so it will fit, but is it ok to use? All the specs match except my new Yoga 2 adapter doesn't have the wattage listed on it.
View 1 Replies View RelatedI just bought a Lenovo Yoga 2 pro and installed windows 8.1 by itsef. During Windows 8.1 initial setup I was able to use keyboard to type in PC Name, but after that the keyboard and touch pad was not working/no any response any more. After Windows 8.1 lunched the keyboard also no any response. I have to use touch screen soft keyboard. But when laptop in BIOS mode (turn power off and press a small round button next to power button) the keyboard was working fine. So I think that the keyboard hardware is ok, but some thing iwas wrong with Windows 8.1 software issue. I also un-selected all on Easy of Access->Keyboard section in Windows 8.1.
View 3 Replies View RelatedI have a Yoga 2 pro and the powered usb port was supposed to work as a charger even with the laptop turned off, but it is working just with the computer on, I already tryed to change the in the energy options the selective suspension of the usb and also in the device manager, I deselect the "computer can turn off the device to save energy" but nothing worked...
View 2 Replies View RelatedI have the issue that my newly bought Yoga 11 (three weeks ago) is charging whenever it seems to feel like. The first time I have charged it, it went up to 92 % telling me its now in power state and not charging. This happened triple. Yesterday my Yoga was beneath the 50 % mark and I plugged in the powercable, the same again: not charging. I unplugged the power cable and at 0 % and a shutdown I booted it and it charged perfectely up to 99 % without moaning. I unplugged the cable and at 77 % the same again, I plugged in the power cable and it charged up to 99 % again.
Is this a bug (battery problem) or a feature (thresholds for a long living battery)?
I recently updated my Yoga 13 to Windows 8.1 and am now experiencing significant lag when resuming from suspend and periodically while I work. Often I will type and not see the text on the screen for another 5+ seconds.
I have run Malwarebytes and Windows Defender and found no malware. By keeping an eye on the task manager I have not been able to identify a misbehaving process.