I got my new Yoga Pro 3 and it is looking and working great except from the two fingers tap which does not. This is a real bummer since I use it all the time on my mac and Asus devices.
View 9 RepliesI just bought a Lenovo Yoga 2 pro and installed windows 8.1 by itsef. During Windows 8.1 initial setup I was able to use keyboard to type in PC Name, but after that the keyboard and touch pad was not working/no any response any more. After Windows 8.1 lunched the keyboard also no any response. I have to use touch screen soft keyboard. But when laptop in BIOS mode (turn power off and press a small round button next to power button) the keyboard was working fine. So I think that the keyboard hardware is ok, but some thing iwas wrong with Windows 8.1 software issue. I also un-selected all on Easy of Access->Keyboard section in Windows 8.1.
View 3 Replies View RelatedI'm getting rid of my Yoga 13 and was wondering if there is a way to do a factory restore with having the ability to use the OKR since it doesn't work. It appears that I have my recovery oem partition intact.
View 9 Replies View RelatedIt is strange that mus Fkeys work as supposed but the airplane mode key does not work anymore. Think it happened after upgrade to W8.1 u1
On the screen I can still activate airplane mode though.
Yoga 11s a great computer but why should the two-finger tap to right click be unavailable? It's a commonly found gesture on Windows and Macs these days and that it's missing be default on my machine drives me crazy. Having to press down firmly to click in the bottom corner or having to click while pressing down two fingers is annoying. I've read some solutions involving drivers and registry edits but not sure what I want to undertake.
View 2 Replies View RelatedI can't use the keyboard and the touchpad at the same time, using the keyboard disables the touchpad.
View 8 Replies View RelatedI have a new issue on my fresh Yoga11s, camera is not working anymore whereas camera seems OK in device manager.
No led is ON when I start camera application. I tried a factor reset without any success. It's like camera is software disabled but not sure.
First, I have two brand new Yoga 2 Pro's with Windows 8.1 (had them for two weeks) and I recently purchased the Actiontec ScreenBeam Pro and started working with it last night.
Second, *both* of the Yoga 2 Pro's are behaving in exactly the same way, and I'll describe that in a moment. Both systems are also update with the latest drivers. I have taken the time to compare all installed versions with the latest available from either Lenovo or Intel. All of the latest Windows updates have been applied.
Third, the firewall was disabled during one interation just to demonstrate that it was not the problem.
Now, here are the installation steps and the resulting problem:
The ScreenBeam is properly connected to an HDTV and is displaying it's initial screen
Swiping into Charms and making my way down to PC and devices -> Devices -> Add a device, results in the Screen Beam being discovered as a television, a PIN being displayed on the TV screen, and that PIN is then entered at the prompt from the "add device" dialog. The ScreenBeam also displays the fact that it was able to succesfully pair with the wireless adapter and displays a screen on the TV stating that it is waiting for a connection. I then access the Project menu through Charms->Devices->Project, but there is *NOT* a selection for projecting to the TV. Eventually, the ScreenBeam times out waiting for the connection and tells you to relauch the wireless display app. At this point, the ScreenBeam is present in the Devices and Printers window as SBWD DF9945-SBWD100A., but it is not active because there is no connection. So, therein lies the problem; I cannot project to the TV screen.
I have performed multiple iterations by deleting the device from Devices and Printers and performing the process again in a very systematic manner to make sure I did not miss anything, and the result is the same. I have performed the steps on two different, brand new systems with the same result. Just for grins, I went out to the Intel site and downloaded their latest WiDi Software, and it simply *wiil not* install on Windows 8.1; the installation terminates stating that the plaform is not supported, including calling out that the operating system is not supported.
From reading the other thread, I see that this same configuration has worked for multiple people. I checked the firmware level on my ScreenBeam, and it is the latest version of 1.1.9.0, so there is nothing further to do there.
Has there ben a definitive solution to the problem of the touch screen not working on the Yoga 13?
View 9 Replies View Relatedthe two buttons to control brightness worked fine before I uninstalled the default graphics driver. Now, when I press it I still get the GUI slider, but the brightness does not change. My brightness can be changed fine in the windows power settings. I have reinstalled the same thing I uninstalled, reinstalled Energy Manager, and still it does not work.
View 2 Replies View RelatedI recently did a fresh install of windows 8 on my yoga and I've installed all the drivers on Lenovo's website. Most of the things are working except for the airplane mode button on the keyboard. Where I can find the driver for that?
View 5 Replies View RelatedHaving a problem with two-finger tap to right click? Two-finger tap to right click was working fine for a while, but it suddenly stopped on my Yoga 13.
I reinstalled the touchpad drivers, and it worked for a few days, then it stopped again. Two-finger click still works fine. So does one-finger tap to left click.
I have just installed the final version of Windows 8.1. The thing I've moserly been waiting for is Miracast.
As for now when I search for wireless displays (Add new device menu) it doesn't appear to find my TV. (An unpaired Android device can)
I'm thinking about driver issues with 8.1..
I can't get my Yoga to recognise any BT devices. I have driver version 1.3.639.3 dated 1/9/2012. I downloaded an update otwb33ww.exe version 3.757.754.082313 but when I install it, I get eventually get a dialog saying "Confirm that Bluetooth is enabled on your system. Plug in your device and click 'OK'. I switch on my BT headphones, click OK and get a message saying "Reeltek Bluetooth is not installed on your system". Then have to restart and end up back with the old drivers.
Just noticed I can connect to my iPhone but still not my Plantronics headphones...
First year, my Yoga's touchscreen was always working correctly, regardless of connected USB devices.
Since some time, if I connect a device into USB 2.0 port, touchscreen gets immediately disabled, no more responding to any touch. In Device Manager, it is not showing any errors. I found a workaround that in Device Manager (HID Devices branch), touchscreen must be set Disabled, then Enabled and then it comes back online. But I know this action was never needed before.
I think it began happening around the time when I started to use Yoga with barcode scanner Heron D-130. But the problem is now happening regadless of USB device, even with devices which were not impacting the touchscreen before. Perhaps not barcode scanner, but some Windows update caused this. Do you have any solution for this so touchscreen will keep working after another USB 2.0 device is connected?
The Airplane mode button has stopped working. Not sure when, but could be well after updating. Everything else works well.
View 2 Replies View RelatedI have a Yoga 13 and have been avoiding the 8.1 update but was forced upon me yesterday. Media player stopped working but found the update on this site.
However all old videos now play fine but new ones taken today will not and just says 'Windows Media Player has stopped working'.
I use a USB MIDI keyboard (Akai LPK25) with my Ideapad. I've not previously had an issue with this configuration, but since about a week ago, as soon as I plug in the device the touch screen becomes disabled. Removing the device doesn't restore touch screen functionality; I actually have to reboot.
Was there a recent USB upgrade that's causing this issue?
Windows 8 was upgraded to Windows 8.1 Upgrade on a Flex 15.
The first time I tried to do the upgrade, I had enough problems that I re-installed from a Windows 8.1 image. All went well and all the drivers work except the Ethernet. The upgrade was relatively painless if you ignore the necessary reboots.
The latest Ethernet driver was downloaded from Lenovo and it was upgraded through Device Manager to version 8.26.218.201
In spite of Device Manager saying the Realtek ethernet adapter is working, no network is recognized by Networks and Sharing Centrewith when an ethernent cable is plugged into the Flex 15 i. The cable is good and has been checked by way of another computer.
I have previously used the hard-wired ethernet once and it worked but I do not remember where the laptop stood during the upgrade path.
This may be a hardware problem which will require mailing the laptop for the repair, or it may be a software / dirver issue. The only other thing I can do is reistall from scratch to confirm it is a hardware problem.
I am working a lot in one place, charger always plugged in.
just to save the battery life...can you run it without it?
I have a Yoga 2 Pro. I pressed the Fn and the +(plus) key to increase some text size. How do I reverse this?
View 3 Replies View RelatedWell, didn't check before installing Macrium Reflect Professional but it detected 7 (seven) partitions in my Yoga2 13 (Not Pro) as follows:
1 - WinRE_DRV 1GB total 313MB used - NTFS Primary
2 - System_DRV 260MB total 28.5MB used - FAT32(LBA) Primary
3 - LRS_ESP 1GB total 497MB used - FAT32 (LBA) Primary
4 - NONE Unformated Primary (?)
5 - Windows OS 422GB total 44.58GB used (C NTFS Primary
6 - Lenovo 25GB total 2.46GB used (D NTFS Primary
7 - PBR_DRV 15.75GB total 12.46GB used NTFS Primary
All Yoga2 13 are like that from the factory or Macrium created some of them? If they are like that from the factory what each of the partitions have inside (other than, obvlously, the #5 Windows.)
In creating an image for restore in case one is needed which ones I should include in the image?
Is there any way to boost volume on Yoga 13?? I have my system volume and video player volume maxed out and it's STILL not loud enough. No it doesn't have anything to do with what I'm watching, and no, nothing to do with the player. Windows Media, VLC, and Divx have been tried.
View 4 Replies View RelatedI bought a Lenovo yoga 13 a couple days ago. the yoga freezes 1-2 times per day. the Screen Shows the frozen application, the Keyboard, touchpad or mouse didnt Response.
I watched into the logfile and DptfPolicyLpmServiceHelper is the last entry before the Crash. I uninstalled the Dynamic Platform and Thermal Framework, but it doesn't work....
I purchased a new Flex 2-15 online the past week. The model name shown on the back is "20405". Manufacture date is May 12, 2014. The User Guide refers to a "Novo Button", which is shown in diagrams as being on both the left edge and the right edge near the front. Neither location has a button of any sort. The right edge has a pinhole in the supposed button location. A curved arrow icon is next to the pinhole. I have an inkling this may be some sort of factory reset button. Lacking the Novo button, what is the procedure for accessing the features which the manual says are accessed by pressing this non-existent button?. That is, BIOS, and/or the one touch image backup/restore system?
View 7 Replies View RelatedI´ve got a problem when I connect the yoga 2 pro with my TV (8 year old sony, full hd) with HDMI. The picture doesn´t fit into the screen, it is too big. I tried changing the resolution of both yoga and tv and at the Intel graphics driver I can´t change the scaling option. H
View 4 Replies View RelatedI paid $60 just for some recovery discs to recover my accidentally formatted Yoga 2 Pro. The discs came with no instructions whatsoever, and using them is weird. First of all, there is two disc 1's, no disc 2, yet there is a disc 3 and 4. Support confirmed this is normal. There is also no prompt between discs 1,1, and 2, so despite making my best guess at when to switch, I can't confidently say I'm not screwing things up.
After the whole process completes, the bios can't find bootable media.
I had bought yoga 2 pro from Malaysia three weeks back. And I had traveled back to India last week.The PC was working fine till yesterday. Yesterday while I was working suddenly the system hangs and I had to hard reset. But after that the system didn't boot up. It shows boot device not found. I have switched it off and tried booting using restore button and opened the bios it shows that HDD not detected.
Similar kind of issue I faced two times before but if I hard boot again it worked fine.
I just had my Yoga 13 for about two months and really liked it. Upped RAM to 8GB and added the second SSD. Sweet.
But now I managed to nearly brick my nice little Yoga by spilling juice all over it, and now I am in recovery process.
I checked the original mSATA SSD on another machine, and it looks like it still works fine, all partitions are still there.
In the very beginning after first "drying" the Yoga I got it to boot a couple of times. But now all I get is "Default Boot Device Missing".
Next thing I'll try is putting the SSD in an external USB enclosure and try and boot from there.
Where I can get the windows 7 Drivers for the Yoga 11s. After a format and clean install of windows 7 i have a bunch of yellow bangs in device manager?
View 4 Replies View Related