I use a USB MIDI keyboard (Akai LPK25) with my Ideapad. I've not previously had an issue with this configuration, but since about a week ago, as soon as I plug in the device the touch screen becomes disabled. Removing the device doesn't restore touch screen functionality; I actually have to reboot.
Was there a recent USB upgrade that's causing this issue?
Has there ben a definitive solution to the problem of the touch screen not working on the Yoga 13?
View 9 Replies View RelatedI have a crack on my screen that starts in the bottom left and spreads to almost the top right. It is not bad and everything works fine except for the touchscreen. Only half the touchscreen works and sometimes the crack causes the other half of the touchscreen to act on its own and its very annoying and messes me up when I try to surf the web or use Microsoft Office. Is there a way I can disable the touchscreen?
View 9 Replies View RelatedFirst year, my Yoga's touchscreen was always working correctly, regardless of connected USB devices.
Since some time, if I connect a device into USB 2.0 port, touchscreen gets immediately disabled, no more responding to any touch. In Device Manager, it is not showing any errors. I found a workaround that in Device Manager (HID Devices branch), touchscreen must be set Disabled, then Enabled and then it comes back online. But I know this action was never needed before.
I think it began happening around the time when I started to use Yoga with barcode scanner Heron D-130. But the problem is now happening regadless of USB device, even with devices which were not impacting the touchscreen before. Perhaps not barcode scanner, but some Windows update caused this. Do you have any solution for this so touchscreen will keep working after another USB 2.0 device is connected?
My integrated webcam on my lenovo yoga ideapad seems to be malfuncitoning. When I try to open any camera using applications the screen is black with no error message or viewable problems. When I check in device manager the camera says all the drivers are updated and it is in working condition.
Things I've tried/ Things others have suggested and did not work:
fn+esc
Trying it in other apps besides camera
Check device manager for driver issues
Update Drivers
Disable Camera
I bought this computer on Jan. 1st and so far I love it, however, a few days ago I noticed that everytime I connect or disconnect my charger the screen goes black for a few seconds. It's not the worse problem however it is extremely annoying! I tried checking both the intel graphics settings and power management settings to see if an adjudtment would work but it has not.
View 2 Replies View RelatedI know, that F10 it's a Windows-only laptop and Linux not officially supported on it by Lenovo,
Have purchased just yesterday a new IdeaPad F10, Spanish edition
Have successfully installed Ubuntu 14.04.1 x64 on it. Have preserverd the possibility to boot Windows and Recovery.
The installation was smooth, every things was working fine, but:
After the closing the cap, the laptop was going to hibernate, and then no way to resume or get it on.
Have tried to press the power button for a 8-10 second then disconnect the AC cable.
When doing this the power indicator becomes white for around of 30-40 seconds then off, during this nothing is happens, the screeen is black, no fans no HDD activity noise. Only if pressing the Windows logo on the screen it´s become giving a some sound, not a beep but it hears like... a rattle or something like..
It is dead now? I belive that disconnecting the battery can solve this but it´s mean loosing the warranty, because it´s necessary to remove the back screws. Or it´s possible to reanimate it by the other way?
My Lenovo Ideapad Flex laptop does not switch on when I press the power button. It was working till this morning, when I switched it off (via an operating system shut down in Windows 8.1). When I tried to turn it on an hour later, I found that pushing the power button has no effect at all.
I tried pushing the novo button. In this case the laptop does turn on and shows the "lenovo" welcome screen for a few seconds. However, it promptly switches off again. The symptoms do not depend on the laptop being connceted to power: they are exactly the same in the two cases.
Meaning always leave them plugged in day and night. 2nd question, is it ok to always leave the ac adapter connected to power outlet and the other end connected to the netbook.
View 5 Replies View RelatedPhoto importer in German when settings in English tried uninstalling genesys and reinstalled no joy. I have ideapad flex 15 and running win 8.1 .....
View 3 Replies View RelatedI've been trying to use a Logitech ultrathin touch bluetooth mouse and microsoft sculpt mobile bluetooth keyboard with my ideapad. I'm running Windows 8.1. Both work fine for a while but then it appears they lose the bluetooth connection. This seems to often coincide with access network/internet over WiFi. The only solution is to call up the Bluetooth manage devices setting and let it reconnect. If I leave the manage bluetooth device page open on a second screen it works, but clearly its not ideal!
I was running the Lenovo driver for Bluetooth but I've tried removing it and using the Generic Windows driver. So far though the same happened after a short while.
When I first got my Y2P I tried to pair my phone with it to use that silly Lenovo SMS utility. That was 4 monts ago and I am at my wits end trying to UN install my phone. I cannot get my computer to pair to anything other than my bt mouse. Have tried headphones and keyboards... no go!!!
It cannot even connect to my phone!!! I have tried...
-Manually removed all bluetooth drivers and my phone's driver. Including showing hidden devices.
-Deleted the drivers using intel's driver removal tool
-Installed new drivers
-Tried every method for removing drivers that shows up on search engines on the first two pages.
I've just bought a lenovo ideapad flex14.
Excellent little laptop, but i´m wondering about a thing.
Under device manager --> display adapters, theres is two graphicscard. But there should only be one in the machine?
The two graphicscard in question is:
- AMD Radeon HD 8330
- AMD Radeon HD 8570M
My model is:
AMD A4-5000 quadcore 1,5 ghz.
AMD Radeon HD 8570M
8 GB DDR3 ram
it should only be the AMD radeon 8570M with 1 gb dedicated memory.Furthermore severeal hardware info programs shows the same two graphics card, but only 8330 has temperature info, along with other informations.
Yoga 13 bought in 2012. Was working fine with 128 GB / 4 GB. Tried adding another SSD and 8 GB RAM (Crucible), and now I get the message "Default Boot Device Missing or Boot Failed. Insert recovery media and select any key."
I went through the bios and Information says "Hard Disk: Not Detected". Have tried F9 factory reset. No response. What else can I do?
I got my new Yoga Pro 3 and it is looking and working great except from the two fingers tap which does not. This is a real bummer since I use it all the time on my mac and Asus devices.
View 9 Replies View RelatedI just bought a Lenovo Yoga 2 pro and installed windows 8.1 by itsef. During Windows 8.1 initial setup I was able to use keyboard to type in PC Name, but after that the keyboard and touch pad was not working/no any response any more. After Windows 8.1 lunched the keyboard also no any response. I have to use touch screen soft keyboard. But when laptop in BIOS mode (turn power off and press a small round button next to power button) the keyboard was working fine. So I think that the keyboard hardware is ok, but some thing iwas wrong with Windows 8.1 software issue. I also un-selected all on Easy of Access->Keyboard section in Windows 8.1.
View 3 Replies View RelatedI've just bought brand new Ideapad s210 touch. But touchscreen is not working.
What I did so far:
- instal all windows 8 updates - still not working,
- update to 8.1 and update - still not working.
Check my hardware in control panel - everything seems to be ok - but maybe I dont know where to look ?
Maybe same drivers are needed ?
I'm getting rid of my Yoga 13 and was wondering if there is a way to do a factory restore with having the ability to use the OKR since it doesn't work. It appears that I have my recovery oem partition intact.
View 9 Replies View RelatedIt is strange that mus Fkeys work as supposed but the airplane mode key does not work anymore. Think it happened after upgrade to W8.1 u1
On the screen I can still activate airplane mode though.
Yoga 11s a great computer but why should the two-finger tap to right click be unavailable? It's a commonly found gesture on Windows and Macs these days and that it's missing be default on my machine drives me crazy. Having to press down firmly to click in the bottom corner or having to click while pressing down two fingers is annoying. I've read some solutions involving drivers and registry edits but not sure what I want to undertake.
View 2 Replies View RelatedI can't use the keyboard and the touchpad at the same time, using the keyboard disables the touchpad.
View 8 Replies View RelatedI have a new issue on my fresh Yoga11s, camera is not working anymore whereas camera seems OK in device manager.
No led is ON when I start camera application. I tried a factor reset without any success. It's like camera is software disabled but not sure.
First, I have two brand new Yoga 2 Pro's with Windows 8.1 (had them for two weeks) and I recently purchased the Actiontec ScreenBeam Pro and started working with it last night.
Second, *both* of the Yoga 2 Pro's are behaving in exactly the same way, and I'll describe that in a moment. Both systems are also update with the latest drivers. I have taken the time to compare all installed versions with the latest available from either Lenovo or Intel. All of the latest Windows updates have been applied.
Third, the firewall was disabled during one interation just to demonstrate that it was not the problem.
Now, here are the installation steps and the resulting problem:
The ScreenBeam is properly connected to an HDTV and is displaying it's initial screen
Swiping into Charms and making my way down to PC and devices -> Devices -> Add a device, results in the Screen Beam being discovered as a television, a PIN being displayed on the TV screen, and that PIN is then entered at the prompt from the "add device" dialog. The ScreenBeam also displays the fact that it was able to succesfully pair with the wireless adapter and displays a screen on the TV stating that it is waiting for a connection. I then access the Project menu through Charms->Devices->Project, but there is *NOT* a selection for projecting to the TV. Eventually, the ScreenBeam times out waiting for the connection and tells you to relauch the wireless display app. At this point, the ScreenBeam is present in the Devices and Printers window as SBWD DF9945-SBWD100A., but it is not active because there is no connection. So, therein lies the problem; I cannot project to the TV screen.
I have performed multiple iterations by deleting the device from Devices and Printers and performing the process again in a very systematic manner to make sure I did not miss anything, and the result is the same. I have performed the steps on two different, brand new systems with the same result. Just for grins, I went out to the Intel site and downloaded their latest WiDi Software, and it simply *wiil not* install on Windows 8.1; the installation terminates stating that the plaform is not supported, including calling out that the operating system is not supported.
From reading the other thread, I see that this same configuration has worked for multiple people. I checked the firmware level on my ScreenBeam, and it is the latest version of 1.1.9.0, so there is nothing further to do there.
the two buttons to control brightness worked fine before I uninstalled the default graphics driver. Now, when I press it I still get the GUI slider, but the brightness does not change. My brightness can be changed fine in the windows power settings. I have reinstalled the same thing I uninstalled, reinstalled Energy Manager, and still it does not work.
View 2 Replies View RelatedI recently did a fresh install of windows 8 on my yoga and I've installed all the drivers on Lenovo's website. Most of the things are working except for the airplane mode button on the keyboard. Where I can find the driver for that?
View 5 Replies View RelatedHaving a problem with two-finger tap to right click? Two-finger tap to right click was working fine for a while, but it suddenly stopped on my Yoga 13.
I reinstalled the touchpad drivers, and it worked for a few days, then it stopped again. Two-finger click still works fine. So does one-finger tap to left click.
I have just installed the final version of Windows 8.1. The thing I've moserly been waiting for is Miracast.
As for now when I search for wireless displays (Add new device menu) it doesn't appear to find my TV. (An unpaired Android device can)
I'm thinking about driver issues with 8.1..
My XPS 12 Duo touch screen stopped working one day.
My Device Manager shows that the I2C HID Device is not working (With a status of: This device cannot start. (Code 10) STATUS_DEVICE_POWER_FAILURE
I'm not sure why as nothing changed... that I know of.
I have uninstalled and reinstalled the drivers, I have made sure all drivers are up dated (as on dell.com), and eventually I even formatted the HDD thinking some update must have caused this.
Unfortunately I have had no luck.
Just to add, Dell replaced my screen (due to ghost images) about a month ago - I'm thinking this could be the cause.
I can't get my Yoga to recognise any BT devices. I have driver version 1.3.639.3 dated 1/9/2012. I downloaded an update otwb33ww.exe version 3.757.754.082313 but when I install it, I get eventually get a dialog saying "Confirm that Bluetooth is enabled on your system. Plug in your device and click 'OK'. I switch on my BT headphones, click OK and get a message saying "Reeltek Bluetooth is not installed on your system". Then have to restart and end up back with the old drivers.
Just noticed I can connect to my iPhone but still not my Plantronics headphones...
The Airplane mode button has stopped working. Not sure when, but could be well after updating. Everything else works well.
View 2 Replies View Related