Lenovo Yoga Flex 14D :: Device Manager Says It Has Two Graphic Cards?
Aug 27, 2014
I've just bought a lenovo ideapad flex14.
Excellent little laptop, but i´m wondering about a thing.
Under device manager --> display adapters, theres is two graphicscard. But there should only be one in the machine?
The two graphicscard in question is:
- AMD Radeon HD 8330
- AMD Radeon HD 8570M
My model is:
AMD A4-5000 quadcore 1,5 ghz.
AMD Radeon HD 8570M
8 GB DDR3 ram
it should only be the AMD radeon 8570M with 1 gb dedicated memory.Furthermore severeal hardware info programs shows the same two graphics card, but only 8330 has temperature info, along with other informations.
I just have a few questions about how conservation mode and express charging work. These two are located in Energy Manager under settings.
Conservation mode keeps the battery percent at 55-60%. How is this done? Does the computer discharge until 55% and then charge back up to 60%? Also, if the computer is off, but the AC adapter is left in, will the computer still remain between 55 and 60%? Are there any detrimental effects on the battery?
Express charging allows the computer to be fully charged in 100 minutes. How is this done? Why is this feature not enabled by default? Are there any detrimental effects on the battery?
When I first got my Y2P I tried to pair my phone with it to use that silly Lenovo SMS utility. That was 4 monts ago and I am at my wits end trying to UN install my phone. I cannot get my computer to pair to anything other than my bt mouse. Have tried headphones and keyboards... no go!!!
It cannot even connect to my phone!!! I have tried...
-Manually removed all bluetooth drivers and my phone's driver. Including showing hidden devices. -Deleted the drivers using intel's driver removal tool -Installed new drivers -Tried every method for removing drivers that shows up on search engines on the first two pages.
Yoga 13 bought in 2012. Was working fine with 128 GB / 4 GB. Tried adding another SSD and 8 GB RAM (Crucible), and now I get the message "Default Boot Device Missing or Boot Failed. Insert recovery media and select any key."
I went through the bios and Information says "Hard Disk: Not Detected". Have tried F9 factory reset. No response. What else can I do?
First year, my Yoga's touchscreen was always working correctly, regardless of connected USB devices.
Since some time, if I connect a device into USB 2.0 port, touchscreen gets immediately disabled, no more responding to any touch. In Device Manager, it is not showing any errors. I found a workaround that in Device Manager (HID Devices branch), touchscreen must be set Disabled, then Enabled and then it comes back online. But I know this action was never needed before.
I think it began happening around the time when I started to use Yoga with barcode scanner Heron D-130. But the problem is now happening regadless of USB device, even with devices which were not impacting the touchscreen before. Perhaps not barcode scanner, but some Windows update caused this. Do you have any solution for this so touchscreen will keep working after another USB 2.0 device is connected?
I use a USB MIDI keyboard (Akai LPK25) with my Ideapad. I've not previously had an issue with this configuration, but since about a week ago, as soon as I plug in the device the touch screen becomes disabled. Removing the device doesn't restore touch screen functionality; I actually have to reboot.
Was there a recent USB upgrade that's causing this issue?
I have reinstalled the drivers for the Nvidia card and now I no longer see the icon in "hidden" icons of the bar, that showed which programs are using this card.
i just updated my drives for AMD Radeon HD6630M with new beta2 catalyst but now i cant switch graphic cards. I tried to go into CCC - Method switchable graphics selected Manualy switch GPU pressed apply and nothing happend. Atleast i tried to uninstal this CCC isntal the old one and tried again. Problem remains and now im sad about this becouse my games are now useless . I can just select which GPU i want for aplications but its bad cause my fps dropped. I just realized before windows score with randomly switching cards for aplications is just 6,3 for games and 4,9 for other stuff. Before i have 6,7 for both becouse i selected the AMD GPU FOREVER.
I'm using the W540 with an ultradock and external monitors. After upgrading my W540 to win8.1 64 bit, device manager is showing an unknown device. I'm not quite sure what it is, but almost everything seems to be working fine and Lenovo solution center isn't finding any driver updates.
I did notice that the solution center hardware scan did not test the video card memory and listed that test as N/A. Video and monitors seem to be working fine though and both nvidia and intel graphics show up in device manager.
Device manager lists the device in question as follows: Device instance path: ROOTSYSTEM001 Hardware Ids: rootiwdbus Device stack: DriverPnPManager
I have just installed Windows 8.1 x64 on my Lenovo E330.
I downloaded drivers from the website, and installed all of them. But after that there's one device listed as Unknown in device manager, and I can't figure our which device it is.
Hardware ID is {48126E0D-4BDD-4D26-8A24-569C7AB522D6}SettingsDriver, so that doesn't identify the device.
I just bought a B590, model 20208, with, i3-3110m, 500GB HDD, GeForce 720M.I installed Win 7 64bits, but in Device Manager, before installing all the drivers appeared Other Devices an Unknown Device with thise details: code 28, Device type: Other devices; Location: on Microsoft ACPI-Compliant Embedded Controllert . After installing drivers, the problem persists.Another problem was with PCI express but resolved with Intel Management Engine Interface drivers.Other problem resolved was with the GeForce 720 M videocard; wasn't recognized but resolved with the last driver from GeForce site. the last problem remained it's The Unknown Devices.
Machine name: LENOVO-PC Operating System: Windows 8.1 Single Language 64-bit (6.3, Build 9600) (9600.winblue_gdr.140330-1035) Language: English (Regional Setting: English) System Manufacturer: LENOVO System Model: 20216 BIOS: 74CN35WW(V1.10) Processor: Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz (8 CPUs), ~2.4GHz Memory: 8192MB RAM Available OS Memory: 6130MB RAM Page File: 1423MB used, 10850MB available Windows Dir: C:WINDOWS DirectX Version: DirectX 11 DX Setup Parameters: Not found User DPI Setting: Using System DPI System DPI Setting: 96 DPI (100 percent) DWM DPI Scaling: Disabled
Its a y410p. I want to change my graphic to discrete graphic.
Well, didn't check before installing Macrium Reflect Professional but it detected 7 (seven) partitions in my Yoga2 13 (Not Pro) as follows:
1 - WinRE_DRV 1GB total 313MB used - NTFS Primary 2 - System_DRV 260MB total 28.5MB used - FAT32(LBA) Primary 3 - LRS_ESP 1GB total 497MB used - FAT32 (LBA) Primary 4 - NONE Unformated Primary (?) 5 - Windows OS 422GB total 44.58GB used (C NTFS Primary 6 - Lenovo 25GB total 2.46GB used (D NTFS Primary 7 - PBR_DRV 15.75GB total 12.46GB used NTFS Primary
All Yoga2 13 are like that from the factory or Macrium created some of them? If they are like that from the factory what each of the partitions have inside (other than, obvlously, the #5 Windows.)
In creating an image for restore in case one is needed which ones I should include in the image?
Is there any way to boost volume on Yoga 13?? I have my system volume and video player volume maxed out and it's STILL not loud enough. No it doesn't have anything to do with what I'm watching, and no, nothing to do with the player. Windows Media, VLC, and Divx have been tried.
I bought a Lenovo yoga 13 a couple days ago. the yoga freezes 1-2 times per day. the Screen Shows the frozen application, the Keyboard, touchpad or mouse didnt Response.
I watched into the logfile and DptfPolicyLpmServiceHelper is the last entry before the Crash. I uninstalled the Dynamic Platform and Thermal Framework, but it doesn't work....
I purchased a new Flex 2-15 online the past week. The model name shown on the back is "20405". Manufacture date is May 12, 2014. The User Guide refers to a "Novo Button", which is shown in diagrams as being on both the left edge and the right edge near the front. Neither location has a button of any sort. The right edge has a pinhole in the supposed button location. A curved arrow icon is next to the pinhole. I have an inkling this may be some sort of factory reset button. Lacking the Novo button, what is the procedure for accessing the features which the manual says are accessed by pressing this non-existent button?. That is, BIOS, and/or the one touch image backup/restore system?
I got my new Yoga Pro 3 and it is looking and working great except from the two fingers tap which does not. This is a real bummer since I use it all the time on my mac and Asus devices.
I´ve got a problem when I connect the yoga 2 pro with my TV (8 year old sony, full hd) with HDMI. The picture doesn´t fit into the screen, it is too big. I tried changing the resolution of both yoga and tv and at the Intel graphics driver I can´t change the scaling option. H
I paid $60 just for some recovery discs to recover my accidentally formatted Yoga 2 Pro. The discs came with no instructions whatsoever, and using them is weird. First of all, there is two disc 1's, no disc 2, yet there is a disc 3 and 4. Support confirmed this is normal. There is also no prompt between discs 1,1, and 2, so despite making my best guess at when to switch, I can't confidently say I'm not screwing things up.
After the whole process completes, the bios can't find bootable media.
I had bought yoga 2 pro from Malaysia three weeks back. And I had traveled back to India last week.The PC was working fine till yesterday. Yesterday while I was working suddenly the system hangs and I had to hard reset. But after that the system didn't boot up. It shows boot device not found. I have switched it off and tried booting using restore button and opened the bios it shows that HDD not detected.
Similar kind of issue I faced two times before but if I hard boot again it worked fine.
Where I can get the windows 7 Drivers for the Yoga 11s. After a format and clean install of windows 7 i have a bunch of yellow bangs in device manager?
I just got the Yoga 2 Pro and it seems like a great laptop / tablet. I have one big problem: the touchpad is near-unusable for me. It seems like I'm constantly activating the switch app gesture and just cannot use it.
How do I turn off all of the gestures on the touchpad so that it just functions like a normal mouse????
I've got a Yoga 11s which is barely a few months old and hasn't seen much use. Having the same problem - it won't power on or charge (powers on only when plugged in). In Lenovo Energy Manager battery status shows "Good" and charging status shows "Battery Connected". WIndows power management icon however, shows Plugged-in, not charging. Never had that problem before either, but it came with the power-on failure so I guess they're related.
I cannot get the Y2P to shutdown or sleep. When I try to shut down it powers off but after about 2 seconds it turns itself back on and boots up. Same thing happens when I try to sleep.I've tried pretty much everything I could find online including the following:
-Turn off wake on lan on the network adapter -Turn off auto restart on windows errors -Updated bios -Updated drivers -Disabled all non microsoft services -Factory reset of the OS
Went through every device in device manager and turned off "Allow this device to wake the computer"powercfg /lastwake (shows nothing).Shutting down isn't a huge deal as holding down the power button will eventually turn it off. But not being able to sleep the laptop when I close the lid is a deal breaker as the battery constantly drains.
I just got the Yoga 2 Pro, I also have an older Thinkpad 65W 20V AC adapter with a ThinkPad Slim Power Conversion Cable, so it will fit, but is it ok to use? All the specs match except my new Yoga 2 adapter doesn't have the wattage listed on it.
I just bought a Lenovo Yoga 2 pro and installed windows 8.1 by itsef. During Windows 8.1 initial setup I was able to use keyboard to type in PC Name, but after that the keyboard and touch pad was not working/no any response any more. After Windows 8.1 lunched the keyboard also no any response. I have to use touch screen soft keyboard. But when laptop in BIOS mode (turn power off and press a small round button next to power button) the keyboard was working fine. So I think that the keyboard hardware is ok, but some thing iwas wrong with Windows 8.1 software issue. I also un-selected all on Easy of Access->Keyboard section in Windows 8.1.
I have a Yoga 2 pro and the powered usb port was supposed to work as a charger even with the laptop turned off, but it is working just with the computer on, I already tryed to change the in the energy options the selective suspension of the usb and also in the device manager, I deselect the "computer can turn off the device to save energy" but nothing worked...
