I'm getting rid of my Yoga 13 and was wondering if there is a way to do a factory restore with having the ability to use the OKR since it doesn't work. It appears that I have my recovery oem partition intact.
View 9 RepliesI lost the restore partition on the original SSD that my Yoga 13 shipped with. Is there a collection of drivers and whatnot that would allow me to restore it to factory defaults on my own with a fresh windows installation? I have the win8 key from the BIOS but don't want to lose out on all the required drivers if I were to just reinstall windows myself.
View 1 Replies View RelatedI just got it about 2 weeks ago and it's all booger up. I think I accidentally installed some malware and it now there's stuff I just can't get off it. I've been running windows 7 for years and never had malware issues like I'm running into on 8....
Since there's no DVD drive and it didn't come with a system restore thumb drive like my mac air did, how do you do a full factory reset?
I need to get recovery CD's for my yoga 11s to put it back to factory settings?
View 5 Replies View RelatedI don't have the recovery partition on my system anymore, but would like to reset my Ideapad Yoga 13 to factory status. Is this possible somehow? All the guides I've seen assumed that my recovery partition was still intact.
View 2 Replies View RelatedI would like to restore my laptop to factory settings after butchering the factory install. I see the "LENOVO" volume as Drive D, and it appears to have the restore tools, but I cannot figure out how to get to One Key Recovery. I've tried rebooting while pressing F2 or F11 repeatedly; F2 gets me to BIOS, F11 doesn't seem to do anything.
View 2 Replies View RelatedI got my new Yoga Pro 3 and it is looking and working great except from the two fingers tap which does not. This is a real bummer since I use it all the time on my mac and Asus devices.
View 9 Replies View RelatedI just bought a Lenovo Yoga 2 pro and installed windows 8.1 by itsef. During Windows 8.1 initial setup I was able to use keyboard to type in PC Name, but after that the keyboard and touch pad was not working/no any response any more. After Windows 8.1 lunched the keyboard also no any response. I have to use touch screen soft keyboard. But when laptop in BIOS mode (turn power off and press a small round button next to power button) the keyboard was working fine. So I think that the keyboard hardware is ok, but some thing iwas wrong with Windows 8.1 software issue. I also un-selected all on Easy of Access->Keyboard section in Windows 8.1.
View 3 Replies View RelatedIt is strange that mus Fkeys work as supposed but the airplane mode key does not work anymore. Think it happened after upgrade to W8.1 u1
On the screen I can still activate airplane mode though.
Yoga 11s a great computer but why should the two-finger tap to right click be unavailable? It's a commonly found gesture on Windows and Macs these days and that it's missing be default on my machine drives me crazy. Having to press down firmly to click in the bottom corner or having to click while pressing down two fingers is annoying. I've read some solutions involving drivers and registry edits but not sure what I want to undertake.
View 2 Replies View RelatedI can't use the keyboard and the touchpad at the same time, using the keyboard disables the touchpad.
View 8 Replies View RelatedI have a new issue on my fresh Yoga11s, camera is not working anymore whereas camera seems OK in device manager.
No led is ON when I start camera application. I tried a factor reset without any success. It's like camera is software disabled but not sure.
First, I have two brand new Yoga 2 Pro's with Windows 8.1 (had them for two weeks) and I recently purchased the Actiontec ScreenBeam Pro and started working with it last night.
Second, *both* of the Yoga 2 Pro's are behaving in exactly the same way, and I'll describe that in a moment. Both systems are also update with the latest drivers. I have taken the time to compare all installed versions with the latest available from either Lenovo or Intel. All of the latest Windows updates have been applied.
Third, the firewall was disabled during one interation just to demonstrate that it was not the problem.
Now, here are the installation steps and the resulting problem:
The ScreenBeam is properly connected to an HDTV and is displaying it's initial screen
Swiping into Charms and making my way down to PC and devices -> Devices -> Add a device, results in the Screen Beam being discovered as a television, a PIN being displayed on the TV screen, and that PIN is then entered at the prompt from the "add device" dialog. The ScreenBeam also displays the fact that it was able to succesfully pair with the wireless adapter and displays a screen on the TV stating that it is waiting for a connection. I then access the Project menu through Charms->Devices->Project, but there is *NOT* a selection for projecting to the TV. Eventually, the ScreenBeam times out waiting for the connection and tells you to relauch the wireless display app. At this point, the ScreenBeam is present in the Devices and Printers window as SBWD DF9945-SBWD100A., but it is not active because there is no connection. So, therein lies the problem; I cannot project to the TV screen.
I have performed multiple iterations by deleting the device from Devices and Printers and performing the process again in a very systematic manner to make sure I did not miss anything, and the result is the same. I have performed the steps on two different, brand new systems with the same result. Just for grins, I went out to the Intel site and downloaded their latest WiDi Software, and it simply *wiil not* install on Windows 8.1; the installation terminates stating that the plaform is not supported, including calling out that the operating system is not supported.
From reading the other thread, I see that this same configuration has worked for multiple people. I checked the firmware level on my ScreenBeam, and it is the latest version of 1.1.9.0, so there is nothing further to do there.
Has there ben a definitive solution to the problem of the touch screen not working on the Yoga 13?
View 9 Replies View Relatedthe two buttons to control brightness worked fine before I uninstalled the default graphics driver. Now, when I press it I still get the GUI slider, but the brightness does not change. My brightness can be changed fine in the windows power settings. I have reinstalled the same thing I uninstalled, reinstalled Energy Manager, and still it does not work.
View 2 Replies View RelatedI recently did a fresh install of windows 8 on my yoga and I've installed all the drivers on Lenovo's website. Most of the things are working except for the airplane mode button on the keyboard. Where I can find the driver for that?
View 5 Replies View RelatedHaving a problem with two-finger tap to right click? Two-finger tap to right click was working fine for a while, but it suddenly stopped on my Yoga 13.
I reinstalled the touchpad drivers, and it worked for a few days, then it stopped again. Two-finger click still works fine. So does one-finger tap to left click.
I have just installed the final version of Windows 8.1. The thing I've moserly been waiting for is Miracast.
As for now when I search for wireless displays (Add new device menu) it doesn't appear to find my TV. (An unpaired Android device can)
I'm thinking about driver issues with 8.1..
I can't get my Yoga to recognise any BT devices. I have driver version 1.3.639.3 dated 1/9/2012. I downloaded an update otwb33ww.exe version 3.757.754.082313 but when I install it, I get eventually get a dialog saying "Confirm that Bluetooth is enabled on your system. Plug in your device and click 'OK'. I switch on my BT headphones, click OK and get a message saying "Reeltek Bluetooth is not installed on your system". Then have to restart and end up back with the old drivers.
Just noticed I can connect to my iPhone but still not my Plantronics headphones...
First year, my Yoga's touchscreen was always working correctly, regardless of connected USB devices.
Since some time, if I connect a device into USB 2.0 port, touchscreen gets immediately disabled, no more responding to any touch. In Device Manager, it is not showing any errors. I found a workaround that in Device Manager (HID Devices branch), touchscreen must be set Disabled, then Enabled and then it comes back online. But I know this action was never needed before.
I think it began happening around the time when I started to use Yoga with barcode scanner Heron D-130. But the problem is now happening regadless of USB device, even with devices which were not impacting the touchscreen before. Perhaps not barcode scanner, but some Windows update caused this. Do you have any solution for this so touchscreen will keep working after another USB 2.0 device is connected?
The Airplane mode button has stopped working. Not sure when, but could be well after updating. Everything else works well.
View 2 Replies View RelatedI have a Yoga 13 and have been avoiding the 8.1 update but was forced upon me yesterday. Media player stopped working but found the update on this site.
However all old videos now play fine but new ones taken today will not and just says 'Windows Media Player has stopped working'.
I use a USB MIDI keyboard (Akai LPK25) with my Ideapad. I've not previously had an issue with this configuration, but since about a week ago, as soon as I plug in the device the touch screen becomes disabled. Removing the device doesn't restore touch screen functionality; I actually have to reboot.
Was there a recent USB upgrade that's causing this issue?
Windows 8 was upgraded to Windows 8.1 Upgrade on a Flex 15.
The first time I tried to do the upgrade, I had enough problems that I re-installed from a Windows 8.1 image. All went well and all the drivers work except the Ethernet. The upgrade was relatively painless if you ignore the necessary reboots.
The latest Ethernet driver was downloaded from Lenovo and it was upgraded through Device Manager to version 8.26.218.201
In spite of Device Manager saying the Realtek ethernet adapter is working, no network is recognized by Networks and Sharing Centrewith when an ethernent cable is plugged into the Flex 15 i. The cable is good and has been checked by way of another computer.
I have previously used the hard-wired ethernet once and it worked but I do not remember where the laptop stood during the upgrade path.
This may be a hardware problem which will require mailing the laptop for the repair, or it may be a software / dirver issue. The only other thing I can do is reistall from scratch to confirm it is a hardware problem.
I have an Inspiron N5040 just over one year old. To do a Factory Restore I followed the instructions and pressed <F8> after a power up.
In gets to the Advanced Boot Options menu. When I select Repair Your Computer it gives 2 options something like
1) Repair Windows
2) Start Windows Normally
If I select Repair Windows it loops back to the same screen and does not do anything.
What should I do? The laptop did not come with restore CD's or DVD's...
I bought my new latop in October and would like to restore it to it's origional factory settings, however I have been unable to do this as I have been told a number of different actions to try by PC performance and none of them work:
First I was told to press f8 on a reboot then select repair my computer so I pressed f8 and there was no option to repair my computer;
Second I was told to restart and press f12 insert a blank dvd and boot using cd/dvd which would create a boot disc which in turn would restore to factory settings, after choosing boot from cd/dvd my laptop just restarts as normal without creating a boot disc;
I was then told to burn recovery (which was on a small drive D:) to disc first then boot from cd/dvd which has no effect again windows starts normally.........
So I had a look around this recovery file and found a setup icon that said factory restore when I clicked on it, I got the message ERROR: the factory image could not be found please reinstall using the operating system media dvd.
I have a Studio 1558 where I want to reset to do a Dell Factory Image Restore. The instructions say to press the F8 Key when the Dell Logo appears. So far the F8 key fails to work.
View 5 Replies View RelatedMy 3542 laptop has been formatted ..its clean now.The factory restore DVD is not working now .
My friend got the same laptop model .Can i use his factory restore disk to restore mine.
I am working a lot in one place, charger always plugged in.
just to save the battery life...can you run it without it?
I have a Yoga 2 Pro. I pressed the Fn and the +(plus) key to increase some text size. How do I reverse this?
View 3 Replies View Related