I have a Yoga 13 and have been avoiding the 8.1 update but was forced upon me yesterday. Media player stopped working but found the update on this site.
However all old videos now play fine but new ones taken today will not and just says 'Windows Media Player has stopped working'.
The Airplane mode button has stopped working. Not sure when, but could be well after updating. Everything else works well.
View 2 Replies View RelatedI paid $60 just for some recovery discs to recover my accidentally formatted Yoga 2 Pro. The discs came with no instructions whatsoever, and using them is weird. First of all, there is two disc 1's, no disc 2, yet there is a disc 3 and 4. Support confirmed this is normal. There is also no prompt between discs 1,1, and 2, so despite making my best guess at when to switch, I can't confidently say I'm not screwing things up.
After the whole process completes, the bios can't find bootable media.
I have just installed the final version of Windows 8.1. The thing I've moserly been waiting for is Miracast.
As for now when I search for wireless displays (Add new device menu) it doesn't appear to find my TV. (An unpaired Android device can)
I'm thinking about driver issues with 8.1..
I have an unknown devise. It seems to be the "digital media devices".
View 2 Replies View RelatedWindows 8 was upgraded to Windows 8.1 Upgrade on a Flex 15.
The first time I tried to do the upgrade, I had enough problems that I re-installed from a Windows 8.1 image. All went well and all the drivers work except the Ethernet. The upgrade was relatively painless if you ignore the necessary reboots.
The latest Ethernet driver was downloaded from Lenovo and it was upgraded through Device Manager to version 8.26.218.201
In spite of Device Manager saying the Realtek ethernet adapter is working, no network is recognized by Networks and Sharing Centrewith when an ethernent cable is plugged into the Flex 15 i. The cable is good and has been checked by way of another computer.
I have previously used the hard-wired ethernet once and it worked but I do not remember where the laptop stood during the upgrade path.
This may be a hardware problem which will require mailing the laptop for the repair, or it may be a software / dirver issue. The only other thing I can do is reistall from scratch to confirm it is a hardware problem.
Whenever I play games like Hearthstone in regular laptop mode everything is fine. However every time I switch to tablet, tent or stand mode, after less than a minute of playing, I get the error “"display driver stopped responding and has recovered". I even updated my Y2P to the latest Intel graphics driver and it didn’t work. I think it’s something about the tablet mode that’s making the graphics card or processor not function fully.
View 5 Replies View RelatedWindows Media Player on Lenovo G700 17.3-inch Laptop does not recognize MKV files how to play MKV files? It worked on windows 7.
View 2 Replies View RelatedI got my new Yoga Pro 3 and it is looking and working great except from the two fingers tap which does not. This is a real bummer since I use it all the time on my mac and Asus devices.
View 9 Replies View RelatedI just bought a Lenovo Yoga 2 pro and installed windows 8.1 by itsef. During Windows 8.1 initial setup I was able to use keyboard to type in PC Name, but after that the keyboard and touch pad was not working/no any response any more. After Windows 8.1 lunched the keyboard also no any response. I have to use touch screen soft keyboard. But when laptop in BIOS mode (turn power off and press a small round button next to power button) the keyboard was working fine. So I think that the keyboard hardware is ok, but some thing iwas wrong with Windows 8.1 software issue. I also un-selected all on Easy of Access->Keyboard section in Windows 8.1.
View 3 Replies View RelatedI'm getting rid of my Yoga 13 and was wondering if there is a way to do a factory restore with having the ability to use the OKR since it doesn't work. It appears that I have my recovery oem partition intact.
View 9 Replies View RelatedIt is strange that mus Fkeys work as supposed but the airplane mode key does not work anymore. Think it happened after upgrade to W8.1 u1
On the screen I can still activate airplane mode though.
Yoga 11s a great computer but why should the two-finger tap to right click be unavailable? It's a commonly found gesture on Windows and Macs these days and that it's missing be default on my machine drives me crazy. Having to press down firmly to click in the bottom corner or having to click while pressing down two fingers is annoying. I've read some solutions involving drivers and registry edits but not sure what I want to undertake.
View 2 Replies View RelatedI can't use the keyboard and the touchpad at the same time, using the keyboard disables the touchpad.
View 8 Replies View RelatedI have a new issue on my fresh Yoga11s, camera is not working anymore whereas camera seems OK in device manager.
No led is ON when I start camera application. I tried a factor reset without any success. It's like camera is software disabled but not sure.
First, I have two brand new Yoga 2 Pro's with Windows 8.1 (had them for two weeks) and I recently purchased the Actiontec ScreenBeam Pro and started working with it last night.
Second, *both* of the Yoga 2 Pro's are behaving in exactly the same way, and I'll describe that in a moment. Both systems are also update with the latest drivers. I have taken the time to compare all installed versions with the latest available from either Lenovo or Intel. All of the latest Windows updates have been applied.
Third, the firewall was disabled during one interation just to demonstrate that it was not the problem.
Now, here are the installation steps and the resulting problem:
The ScreenBeam is properly connected to an HDTV and is displaying it's initial screen
Swiping into Charms and making my way down to PC and devices -> Devices -> Add a device, results in the Screen Beam being discovered as a television, a PIN being displayed on the TV screen, and that PIN is then entered at the prompt from the "add device" dialog. The ScreenBeam also displays the fact that it was able to succesfully pair with the wireless adapter and displays a screen on the TV stating that it is waiting for a connection. I then access the Project menu through Charms->Devices->Project, but there is *NOT* a selection for projecting to the TV. Eventually, the ScreenBeam times out waiting for the connection and tells you to relauch the wireless display app. At this point, the ScreenBeam is present in the Devices and Printers window as SBWD DF9945-SBWD100A., but it is not active because there is no connection. So, therein lies the problem; I cannot project to the TV screen.
I have performed multiple iterations by deleting the device from Devices and Printers and performing the process again in a very systematic manner to make sure I did not miss anything, and the result is the same. I have performed the steps on two different, brand new systems with the same result. Just for grins, I went out to the Intel site and downloaded their latest WiDi Software, and it simply *wiil not* install on Windows 8.1; the installation terminates stating that the plaform is not supported, including calling out that the operating system is not supported.
From reading the other thread, I see that this same configuration has worked for multiple people. I checked the firmware level on my ScreenBeam, and it is the latest version of 1.1.9.0, so there is nothing further to do there.
Has there ben a definitive solution to the problem of the touch screen not working on the Yoga 13?
View 9 Replies View Relatedthe two buttons to control brightness worked fine before I uninstalled the default graphics driver. Now, when I press it I still get the GUI slider, but the brightness does not change. My brightness can be changed fine in the windows power settings. I have reinstalled the same thing I uninstalled, reinstalled Energy Manager, and still it does not work.
View 2 Replies View RelatedI recently did a fresh install of windows 8 on my yoga and I've installed all the drivers on Lenovo's website. Most of the things are working except for the airplane mode button on the keyboard. Where I can find the driver for that?
View 5 Replies View RelatedHaving a problem with two-finger tap to right click? Two-finger tap to right click was working fine for a while, but it suddenly stopped on my Yoga 13.
I reinstalled the touchpad drivers, and it worked for a few days, then it stopped again. Two-finger click still works fine. So does one-finger tap to left click.
I can't get my Yoga to recognise any BT devices. I have driver version 1.3.639.3 dated 1/9/2012. I downloaded an update otwb33ww.exe version 3.757.754.082313 but when I install it, I get eventually get a dialog saying "Confirm that Bluetooth is enabled on your system. Plug in your device and click 'OK'. I switch on my BT headphones, click OK and get a message saying "Reeltek Bluetooth is not installed on your system". Then have to restart and end up back with the old drivers.
Just noticed I can connect to my iPhone but still not my Plantronics headphones...
First year, my Yoga's touchscreen was always working correctly, regardless of connected USB devices.
Since some time, if I connect a device into USB 2.0 port, touchscreen gets immediately disabled, no more responding to any touch. In Device Manager, it is not showing any errors. I found a workaround that in Device Manager (HID Devices branch), touchscreen must be set Disabled, then Enabled and then it comes back online. But I know this action was never needed before.
I think it began happening around the time when I started to use Yoga with barcode scanner Heron D-130. But the problem is now happening regadless of USB device, even with devices which were not impacting the touchscreen before. Perhaps not barcode scanner, but some Windows update caused this. Do you have any solution for this so touchscreen will keep working after another USB 2.0 device is connected?
I use a USB MIDI keyboard (Akai LPK25) with my Ideapad. I've not previously had an issue with this configuration, but since about a week ago, as soon as I plug in the device the touch screen becomes disabled. Removing the device doesn't restore touch screen functionality; I actually have to reboot.
Was there a recent USB upgrade that's causing this issue?
Where I can get the windows 7 Drivers for the Yoga 11s. After a format and clean install of windows 7 i have a bunch of yellow bangs in device manager?
View 4 Replies View RelatedI recently updated my Yoga 13 to Windows 8.1 and am now experiencing significant lag when resuming from suspend and periodically while I work. Often I will type and not see the text on the screen for another 5+ seconds.
I have run Malwarebytes and Windows Defender and found no malware. By keeping an eye on the task manager I have not been able to identify a misbehaving process.
When I install software on my new Yoga 2 Pro, in some cases the installer window is small and won't maximize. It doesn't matter if the the program is old or new. This only seems to show up on the installer in widows.
Windows 8.1
I love everything about my yoga2 pro, except, when I got it I installed a win 8.1 upgrade because windows told me to. everything seemed to be fine.
After that, the system asked me to install another upgrade. when trying to install that one it said it could not install and was undoing the changes. I read some forums awhile back and it talked about a particular update that needed to be uninstalled before you could proceed. I tried to do that, but it wouldn't let me uninstall the initial 8.1 that i installed.
I let it go because it was asking me like every month or so to automatically shut me down and install updates. But now it forces me to install updates every two days and then can't update so, it undoes it changes and it takes like 30-45 minutes or so. Plus, i do need to get it to be able to accept the updates at some point.
I'm thinking I have to wipe everything and start from scratch??
I have an HP laptop.
Model: G72-B6OUS
Serial: SCB1012PGL
When I put a DVD into the laptop it doesn't play. I tried Windows Media Player, QuikTime and Real Player with no success.
When I go to Device Manager I see Device Status: Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
I tried downloading the device driver and it failed: HP CDDVDW TS-L633R
I got my new Yoga 2 Pro last week and the screen rotation worked properly. I decided to wipe the partitions and install my own version of Windows 8.1.
Since then the screen rotation doesn't work. The screen rotation button doesn't do anything and I don't have the 'Enable auto-rotate' checkbox in the resolution screen
In my device manager I have an error on 'HID Sensor collection' saying "This device cannot start" (Code 10). Failed to initialize sensor from HID collection descriptor". I am not sure if this is related.
My Lenovo Ideapad Flex laptop does not switch on when I press the power button. It was working till this morning, when I switched it off (via an operating system shut down in Windows 8.1). When I tried to turn it on an hour later, I found that pushing the power button has no effect at all.
I tried pushing the novo button. In this case the laptop does turn on and shows the "lenovo" welcome screen for a few seconds. However, it promptly switches off again. The symptoms do not depend on the laptop being connceted to power: they are exactly the same in the two cases.