I lost the restore partition on the original SSD that my Yoga 13 shipped with. Is there a collection of drivers and whatnot that would allow me to restore it to factory defaults on my own with a fresh windows installation? I have the win8 key from the BIOS but don't want to lose out on all the required drivers if I were to just reinstall windows myself.
View 1 Replies
I'm getting rid of my Yoga 13 and was wondering if there is a way to do a factory restore with having the ability to use the OKR since it doesn't work. It appears that I have my recovery oem partition intact.
View 9 Replies View RelatedI would like to restore my XPS M1530 to factory defaults. I saw on the recovery drive a file called Factory.wim Can I use that file to restore factory defaults? I would like to format the drive and start from new again if possible. Do I need the disks that were sent to me with the laptop or is all of the info on the recovery partition?
View 2 Replies View RelatedWe have a Dell E6330 that is running Windows 7 Professional on it. we need to set this Dell back to factory defualts but do not see an option to do so. I know that it does have a recovery partition but I do not see a way to access it.
View 1 Replies View RelatedI don't have the recovery partition on my system anymore, but would like to reset my Ideapad Yoga 13 to factory status. Is this possible somehow? All the guides I've seen assumed that my recovery partition was still intact.
View 2 Replies View RelatedSystem: Aspire 5552, Model Pew76: I'm attempting to restore the default software using the System and Recover Software. Everything goes fine until after Running the Language disk. The installation hangs at 99%. Here's what the Restore Progress displays:
Elapsed time: 12:31:18
Restoring system: 100%
Updating system: 99%
Why does the installation hang at 99%?
I just bought a used Red E520-1143CTO in brand new condition, from someone who screwed up the OS (It had Windows 7 Home Prem 64). A lot of the drivers were missing and not working correctly. The restore partition is still there when I look in My Computer but when i reboot and press F11, I never get the option to access it. There was no Lenovo software installed to create a repair disk and of course, it didn't come with any software. Is there a way to access it?
I also have access to another E520 that is almost exactly the same (It just has the older i3 processor). I tried to create a repair disk from it and use it on this computer but it says the Windows versions are not compatible or the Repair software is not compatible with this version.
So I'm trying to figure out if there is an alternative way to access this restore partition. I've installed a company version of Windows 7 Enterprise 32-bit on this machine and I've got most of the drivers installed and it appears to be working fine. But I have three that have yellow exclaimation points:
1) Base System Device
2) SM Bus Controller
3) Unknown Device
I've been downloaded drivers from this site, but I can't can't figure out which drivers I need to clear this list. So, how to get it restored to factory default. If not, I'd like to know what drivers I need to clear this list. I want it to look like brand new because I was going to give it to someone as a gift. I just don't see the on screen prompts for the wifi button (doens't work), volume, and brightness like the other machine. I'd like to get all that working.
I installed Windows Vista but finally I would like to restore my computer with the Dell factory restore.
At boot, I press F8 but there isn't the "Repair my computer" option anymore...
How can I restore my M1530 with the Recovery partition ?
Just to state first and foremost, this is not an issue I have. This is a preventative post for anyone that may ask down the line. (as I've seen it asked on multiple other forums.)
I had this issue with an inspiron 1720 I just got. It had an issue, so I installed vista from a Vista RTM disk. It didn't fix the problem in the end, so I sent it into dell and got fixed, but I wanted to a fresh restore from the restore partition because on restarts, I'd get the blue screen of Death. Fun stuff right?
Well, Unknowingly, when I installed vista off of the cd, that removed the ctrl+F11 option from the dell. This is stated on many forums, and it seems that most answers to this issue is to format and install a fresh install from cd again, or call dell and get recovery disks. I figured "Heck, If I still have the restore partition, there is not reason why I can't get it to restore with some effort."
Some other people I've seen have just had viral attacks, or just want to sell their laptop and need a fresh install. This is for those people that need it. The answer to the question of what if Control and F11 don't work.
So, Here I am with the fix. There is one required bit of software that's required, and that is simply a dos boot cd. You can find many iso's for dos on the net. All you have to do is burn a copy and boot from it. [EDIT] IMPORTANT: I was wrong about dos. As stated below ( http://www.notebookforums.com/post3049150.html ) you have to do it from a 32 bit environment. You can get through one in the XP repair console (on the install cd) or through one of the options in vista's setup.[/EDIT]
Ok, so this is going to be dumbed down a bit, and I'll explain what the dos commands do. First off, after booting into dos, you need to change to the restore partition. This isn't hard at all, all you do is type "D:" and press enter. After this, you need to find the restore file. This is a file with the extension of *.wim. This is an image of windows from dell factory.
Generally this file is found in d:dellimage and is called Factory.wim. Just to double check, I'm going to tell you to change the directory. Type in "cd dellimage" and press enter. In dos, CD means Change Directory (or enter a folder). Now, to list all of the files in the directory type in "dir" and press enter...............
I bought this laptop 1 WEEK ago. 2 Days after purchase it crashed. Unable to get back in... tried turning on and off numerous times. Finally able to reacess, but system completely reset itself to factory settings. Thought it was a glitch..Its a brand new computer.. 3 days later, same problem. Finally able to get back on, through system repair, but all data is lost AGAIN. System update search states that "there has detected a serious problem loading language files and cannot continue. Please contact Lenovo Support Center" Also, touch screen no longer works.This is a brand new computer!??
View 1 Replies View RelatedI just got it about 2 weeks ago and it's all booger up. I think I accidentally installed some malware and it now there's stuff I just can't get off it. I've been running windows 7 for years and never had malware issues like I'm running into on 8....
Since there's no DVD drive and it didn't come with a system restore thumb drive like my mac air did, how do you do a full factory reset?
I need to get recovery CD's for my yoga 11s to put it back to factory settings?
View 5 Replies View RelatedI have the original yoga 13 128gb and i recently bought anther 128gb same model from ebay. when i installed it it already came windows and all the partiion. i dont need that stuff i just want to use it as a second hard drive for storage puropses. the problem i am having is deleting all the content and combining all the partiion to one.
how do i delete the parttition and format the SSD
as you can see in the image bellow i new the disk 1 to be just SSD for storage purposes
I would like to restore my laptop to factory settings after butchering the factory install. I see the "LENOVO" volume as Drive D, and it appears to have the restore tools, but I cannot figure out how to get to One Key Recovery. I've tried rebooting while pressing F2 or F11 repeatedly; F2 gets me to BIOS, F11 doesn't seem to do anything.
View 2 Replies View RelatedI applied restore defaults i saved and i reset the laptop. After that my laptop asked for password and i do not have it. My laptop is inspiron n5010. I think needs bios password, what should i do?
View 1 Replies View RelatedI had two of the same Windows 8.1 OS on my Y500 (Cloned from original to SSD). Then Last night I tried to 'refresh without affecting your files' option for my OS on the HDD so I have a fresh OS to go back to incase anything happend. then on the Lenovo screen it said that the E: drive was being refreshed as well so I freaked and turned off the computer. NOw I cant access either of the OS's. What should I do? I did do a back up right before and the back up files are still there in a partition I made in the HDD. I used a USB boot of Puppy LInux to see the files on my HDD but it would not let me transfer it to an External Hard Drive. I will Try to install a better linux and try to transfer the OKR files to another Drive.
-how would I go about restoring the back up files if I were to get them on another drive?
I purchased my T420 one year ago and have sufficiently "hosed it up" to the point I wanted to do a factory restore. I saved all my data then proceeded to create the CDs from the Q drive factory restore. I followed the instructs for more and more CDs and once I got up to #12 I noted that the time it was taking to create them was down from several minutes to several seconds. When I got to CD number 18 I thought "this is ridicules" and I popped CD 11 back in to look at its content (via Windows Explorer). I noted it had two folders: 1) Factory restore (or something like that) which was over 500 MB in size and 2) something about data. This "data" folder contained 1 KB of data. I then looked at all subsequent CDs (12-18) and they all only contained this data file. So, rather than continuing to make these (basically empty CDs) I stopped.
I then put the first CD in and rebooted the machine. The factory restore started and I swapped CDs until I got to 12. I put 12 in and it said the required data was not present and to insert the next CD. I did this until I ran out of the CDs I had created. I had to "X" out of the restore app and now when I boot I get nothing but a dimly lit screen and a flickering hard drive light! Am I totally hosed here? How many CDs would it have required had I kept making them? I am ( obviously) a novice.
I was installing Linux and by mistake I wiped out the entire disk inclusing the recovery partition with windows 8 installation stuff !! Do you know if it there is any way to get it back, downlading it from somewhere and installing ? I searched on the Lenovo website but didn't find any clue....
View 9 Replies View Relatedbest way to install a *clean* version of Windows 8 to their Thinkpad that came with Windows 8?
I ordered a T430s with low specs and Windows 8 and I dropped in an 8GB DIMM and mSATA drive. However, the Lenovo implementation of Windows 8 is maddeningly difficult to create backup media (you can't) and the Lenovo "restore" from the HDD partition won't allow you to restore to another drive. Plus, that kinda defeats my original purpose of a clean install without any bloatware onto a fast, user-installed mSATA or SSD.
I have Windows upgrade media I purchased for my desktop, but that install program says the installation won't work with the Lenovo Product Key specific to my Thinkpad T430s (I'm guessing it's an OEM product key while the install media is an upgrade looking for a previously installed Windows 7?)
I had a folder on my desktop and yesterday it disappeared. I also had some files in a folder "untitled folder" with some numbers after the "untitled folder" and, although I was able to save files to it, I can't find it on the hard drive.
I've had my Mac for a few months (and love it) but there are still so many things that I haven't figured out. On Windows you can "restore" the computer to a former date and have things just the way they were on that date.
Is that possible with OSX? It's not a disaster. Nothing critical lost (I hope) but I'm wondering what happened and what I might have done to "lose" those folders.
Due to what I thought were issues with SP1, I uninstalled it. Finding it not to be the case and that the uninstall left my machine somewhat "stuttery", I set it up for a system restore and went to bed. About eight hours later, I checked it and it was still restoring! I figured it had locked up (it's done this before) so I powered it off. Dumb move, I know.
Now, though, I try to start windows but it the screen gets stuck on black before it loads up the glowing windows logo. It will do the loading animation but that's it. I've tried loading Windows from CD but it doesn't make a difference. It loads the files with the DOS-like loading screen, then does the exact same thing.
I've also tried to get it to start in Safe Mode. I push the key to get there but the start-up selection screen only flashes before going right into loading Windows normally.
Please, I don't know what to do and I desperately need this machine to get anything done. It's just outside of warranty, so if there's any way for me to fix this myself I'd like to try.
Some things I've wondered about:
1) Is there a for sure way to get into the start-up selection screen?
2) Can I format the HDD with FDISK and then load windows from my vista cd and have it reinstall?
I'm trying to restore my SXPS16 back to how it was when i bought it using the recovery partition. But when I go to the advanced boot menu the option to do the factory restore is missing.
I know I can do a clean windows install using the CD that came with it but I'd rather just have it the way it was when I first got it.
Does anyone know of a way to fix this, or otherwise, is there another way to do a factory restore?
I just picked up a laptop and I want to do a fresh install of xp. Problem is I don't have a disk. The computer still has dells partition I believe (windows says the HD is 37.3 but it's really a 40). Will the restore partition accomplish what I want?
View 14 Replies View RelatedI am trying to restore my laptop (studio xps 16) to factory settings using the recovery image. If I look in my computer, i can see C and D drives.
D is my recovery partition with 7gb full out of 10gb. This is good and dandy except when i open the D drive, there is one folder that says RECOVERY that is empty. Why is it empty when there are 7gb's of files in there? I already have hidden files shown
Are there steps to be taken before a factory restore - drivers etc?
(Beyond just backing up my data.)
This is an Acer 4530.
I have a Aug 2006, Dell E1505, 1.83 ghz, 1 gb ram, ati 256 1400 etc etc + 80gb HDD (note) win XP & media center
for last three year never formatted my system, it was going good... recently some virus attack happend and it made my notebook verrrrrry slow, so i did the famous Ctrl + F11 !!
follow mark mck's bloatware removal, did a hdd defrag for non-c drive.
But my question is, even after everything the system is not running as fast it did in 2006
boot time is ~1min, shut down is 35 odd seconds...
So, my 2 cents say that after long usage, even if you do a factory restore DO NOT EXPECT a out of the factory hardware/speed, all u get is out of factory windows settings and bloatware ((
I am trying to get my Studio 15 to factory conditions but I am running into two BIG problems:
1) When I press F8, I get no option to "Repair Your System"
2) The Dell Vista reinstall disk does not have to option for OS Restore on it
trying to do a factory image restore on my Studio XPS 1640. I've done this before on other Dells but this one I don't see the Dell image restore option as said in the booklet.
I don't see the Dell Facotry TOols either. I just have the following: startup repair, system restore, system image recovery, windows memory diagnostic, and command prompt.
I chose system image recovery and it doesn't pull up anything - it's for my own images I made. No option to pull up my Dell factory image which I still have in it's own seperate partition.
recently got hit with a bunch of trojans when using Internet Explorer. I managed to clean them off or so I thought. Periodically, when I open Internet Explorer my virus scanner detects a trojan.
Since the original trojan screwed up my computer to a degree I had decided to reload my operating system anyway.
If I hit F8 at boot and do a factory restore will this reload the disk to the state it was in when I originally received it? Will this also get rid of these viruses that seem to still be plaguing my system?
I am planning to restore my laptop to its factory default because of some problems like the "Windows Update" window is all grayed out. I tried finding solutions in the net but it doesn't solve the problem so maybe system restore may do it but inst going to remove all the programs, like MS Office? Are the files saved in drive D also be removed? My laptop has MS Office already when my mother bought it. I have Acer Aspire 5730z.
View 6 Replies View Related
