I would like to restore my XPS M1530 to factory defaults. I saw on the recovery drive a file called Factory.wim Can I use that file to restore factory defaults? I would like to format the drive and start from new again if possible. Do I need the disks that were sent to me with the laptop or is all of the info on the recovery partition?
View 2 RepliesI lost the restore partition on the original SSD that my Yoga 13 shipped with. Is there a collection of drivers and whatnot that would allow me to restore it to factory defaults on my own with a fresh windows installation? I have the win8 key from the BIOS but don't want to lose out on all the required drivers if I were to just reinstall windows myself.
View 1 Replies View RelatedWe have a Dell E6330 that is running Windows 7 Professional on it. we need to set this Dell back to factory defualts but do not see an option to do so. I know that it does have a recovery partition but I do not see a way to access it.
View 1 Replies View RelatedSystem: Aspire 5552, Model Pew76: I'm attempting to restore the default software using the System and Recover Software. Everything goes fine until after Running the Language disk. The installation hangs at 99%. Here's what the Restore Progress displays:
Elapsed time: 12:31:18
Restoring system: 100%
Updating system: 99%
Why does the installation hang at 99%?
I installed Windows Vista but finally I would like to restore my computer with the Dell factory restore.
At boot, I press F8 but there isn't the "Repair my computer" option anymore...
How can I restore my M1530 with the Recovery partition ?
if i use the recovery disk to take my old HP to factory defaults before selling it, is it still possible for someone to use those data recovery software to pull up my old info? Is it just better to use something like dban of killdisk?
View 6 Replies View RelatedHow do I refresh my HP G62? My laptop runs Win7-32bit and it was used by my son. Now that he has another laptop, I want to use his old one and I thought of refreshing the entire OS and to have the laptop as it left the factory with the defaults. Can I refresh it to Win 7 64bit or even Win 8.1?How do I do the refresh procedure with HP tools?
View 7 Replies View RelatedI applied restore defaults i saved and i reset the laptop. After that my laptop asked for password and i do not have it. My laptop is inspiron n5010. I think needs bios password, what should i do?
View 1 Replies View RelatedI decided to restore my aspire 5930g laptop to factory defaults, and started out with creating the restoration discs. At this point, i wasn't really aware that one could restore from the harddrive.
So i booted up the discs and started the restoration process. But now, the dialog tells me to insert the third disc, while i only have two. What should i do? I could try to kill the restoration process and start over from the harddrive, but im afraid to harm the system.
I bought Acer Aspire Switch 10 SW5-012-16GW Detachable 2 in 1 Touchscreen Laptop (64GB) windows 8.1 on 11/30/201 from Amazon.
After two days, I could not get on internet anymore due to some proxy server errors. I also noticed there were many junkies installed.
So, I would like to have a complete clean up by resetting it to factory defaults. The Amazon box did not come with any system CD.
I've been trying to restore my system back to factory defaults for a while now. I've tried pressing ALT + F10 at startup, but it just beeps loudly and brings me to a command screen, saying:
[ /NOEXECUTE=OPTIN]
I've tried several 'fixes' but have had no luck, I would really appreciate somebody helping me, as it would save me in technician costs.
I am trying to restore a corrupted M5 to factory defaults. Since the HDD was corrupted, the Acer eRecovery would not work. I purchased the Recovery Media CD set, changed BIOS to boot from CD, disabled secure Boot.
The System Disc comes up, i selected Restore Operating System to factory default. I get prompts to insert Recovery Disc 1, and after a few seconds get a message that the is no sufficient disk space to copy temporary files.
The HDD is 500GB, C: drive is 450GB and 415GB free.
Just purcased Aspire E1-510-2611 - 64 bit, Windows 8.1 - as it was set up in store as display model it appears to be in "Display Mode" - with account already entered, etc. How do I reset to factory defaults so that when I turn it on it is just like turning it on for the first time or is there a better way to get back to the "just out of the box" condition?
View 3 Replies View RelatedI'm trying to restore my SXPS16 back to how it was when i bought it using the recovery partition. But when I go to the advanced boot menu the option to do the factory restore is missing.
I know I can do a clean windows install using the CD that came with it but I'd rather just have it the way it was when I first got it.
Does anyone know of a way to fix this, or otherwise, is there another way to do a factory restore?
I am trying to restore my laptop (studio xps 16) to factory settings using the recovery image. If I look in my computer, i can see C and D drives.
D is my recovery partition with 7gb full out of 10gb. This is good and dandy except when i open the D drive, there is one folder that says RECOVERY that is empty. Why is it empty when there are 7gb's of files in there? I already have hidden files shown
I have a Aug 2006, Dell E1505, 1.83 ghz, 1 gb ram, ati 256 1400 etc etc + 80gb HDD (note) win XP & media center
for last three year never formatted my system, it was going good... recently some virus attack happend and it made my notebook verrrrrry slow, so i did the famous Ctrl + F11 !!
follow mark mck's bloatware removal, did a hdd defrag for non-c drive.
But my question is, even after everything the system is not running as fast it did in 2006
boot time is ~1min, shut down is 35 odd seconds...
So, my 2 cents say that after long usage, even if you do a factory restore DO NOT EXPECT a out of the factory hardware/speed, all u get is out of factory windows settings and bloatware ((
I am trying to get my Studio 15 to factory conditions but I am running into two BIG problems:
1) When I press F8, I get no option to "Repair Your System"
2) The Dell Vista reinstall disk does not have to option for OS Restore on it
trying to do a factory image restore on my Studio XPS 1640. I've done this before on other Dells but this one I don't see the Dell image restore option as said in the booklet.
I don't see the Dell Facotry TOols either. I just have the following: startup repair, system restore, system image recovery, windows memory diagnostic, and command prompt.
I chose system image recovery and it doesn't pull up anything - it's for my own images I made. No option to pull up my Dell factory image which I still have in it's own seperate partition.
recently got hit with a bunch of trojans when using Internet Explorer. I managed to clean them off or so I thought. Periodically, when I open Internet Explorer my virus scanner detects a trojan.
Since the original trojan screwed up my computer to a degree I had decided to reload my operating system anyway.
If I hit F8 at boot and do a factory restore will this reload the disk to the state it was in when I originally received it? Will this also get rid of these viruses that seem to still be plaguing my system?
I just bought a Vostro 3360 with Win 8.
I created a new partition using Win 8 Disk Management Tool (as shown here [URL] ..... )
When i turned it on again, i saw a message about a failure shutting down the OS. And now i can't start it because it can't fin Operating System. How can i restore it to factory settings?
my computer is a
Inspiron 14R (N4010, Early 2010)
MS Windows 7 64 bit
I got rid of multiple malware problems, but I still don't have sound when going to youtube e.g., as well as can't install anything. Therefore I think the best thing to do is to reset the computer to factory settings.
How to perform a Factory Restore, from the Restore Partition. I'm unable to boot the computer. into windows.
Last time I recall it was CTRL-11 upon boot, didn't work for me.
Windows 8 Pro
Dell XPS 14 Ultrabook
cannot access the Dell back to factory condition in my young daughters Inspiron 6400, Ctrl - F11 I get no response except a load bleeping, is there any other way of accessing it?
View 4 Replies View RelatedI have a Inspiron 5437 with windows 8.1. I'm unable to boot it past a blue box asking for the system password. I don't have that password. My wife and daughter had somehow set this password up. before this I could not get windows 8 to open without a password. I do not have either of the required passwords. Is there a way for me to easily restore to factory settings? hey have no data on the computer that needs to be saved.
View 1 Replies View RelatedI have an Inspiron N5040 just over one year old. To do a Factory Restore I followed the instructions and pressed <F8> after a power up.
In gets to the Advanced Boot Options menu. When I select Repair Your Computer it gives 2 options something like
1) Repair Windows
2) Start Windows Normally
If I select Repair Windows it loops back to the same screen and does not do anything.
What should I do? The laptop did not come with restore CD's or DVD's...
I have to restore my dell vostro 3700 to factory state, but I dont know how. I googled it and just found the instruction like "restart pc, then press F8>repair your computer>choose language>log in as administrator and then choose recovery tool> dell datasafe restore and emergency back-up
It would be ok, but I dont have there the option of "dell datasafe restore and emergency back-up" I have there just startup repair, system restore, system image recovery, windows memory diagnostic, command prompt and that's all... I miss there the 6th option.
I bought my new latop in October and would like to restore it to it's origional factory settings, however I have been unable to do this as I have been told a number of different actions to try by PC performance and none of them work:
First I was told to press f8 on a reboot then select repair my computer so I pressed f8 and there was no option to repair my computer;
Second I was told to restart and press f12 insert a blank dvd and boot using cd/dvd which would create a boot disc which in turn would restore to factory settings, after choosing boot from cd/dvd my laptop just restarts as normal without creating a boot disc;
I was then told to burn recovery (which was on a small drive D:) to disc first then boot from cd/dvd which has no effect again windows starts normally.........
So I had a look around this recovery file and found a setup icon that said factory restore when I clicked on it, I got the message ERROR: the factory image could not be found please reinstall using the operating system media dvd.
I have pushed the f8 button every way I can think, before the windows screen, after the dell splash, the whole time, and cannot get to the factory restore menu.
View 3 Replies View Relatedi have a 2008 Dell XPS M1330 laptop that i wish to restore to factory settings. i have saved/copied/transferred any/all files i wish to save.
i have searched (google, you tube, dell.com, forums, support) for the answer and all i find is suggested use of pressing F8 during start up. when i choose 'repair my system" , windows just loads normally.
the only seemingly 'recovery' disk i can locate says:
DRIVERS AND UTILITIES Already installed on your computer/For reinstalling Dell xps m1330 computer software. it also says: contents: device drivers/diagnostics and utilities.
i want to 'wipe the slate clean' and start the computer fresh now that i have a new xps8700. if i use this disk to which i refer, will it do what i am wanting? the computer works fine, but i'm afraid of screwing something up trying to just clean it up and back to original condition.
I have the operating system disk to restore my Dell Inspiron 8600 Laptop, but I can't find my Windows certificate of Authenticity that will work--I must have at least four or five. I've looked all over the web and the Dell.com to no avail.
View 6 Replies View Related