Dell Vostro 3700 :: How To Restore To Factory State
Jul 28, 2012
I have to restore my dell vostro 3700 to factory state, but I dont know how. I googled it and just found the instruction like "restart pc, then press F8>repair your computer>choose language>log in as administrator and then choose recovery tool> dell datasafe restore and emergency back-up
It would be ok, but I dont have there the option of "dell datasafe restore and emergency back-up" I have there just startup repair, system restore, system image recovery, windows memory diagnostic, command prompt and that's all... I miss there the 6th option.
Pavilion G6-SS40SA running Windows 8. I am working on this computer for a friend. Somehow, he managed to get an app on there which ran at startup and resulted in it slowing down internet access to a crawl as well as making the machine virtually unusable . In an effort to get rid of it, he attempted running restore. However, neither destructive or non-destructive options would work. He was getting error messages - firstly 'Unable to reset your PC. A required drive partition is missing', followed by 'The drive where Windows is installed is locked. Unlock the drive and try again'. I managed to locate the program that was causing the problem, and uninstalled it. He asked me to reset the computer to factory state, but unfortunately, this will not work - it starts up, warns that all data will be lost and I confirm that I want to proceed. It then appears to start the process, but almost immediately ends shows a message saying that no changes have been made. Where do I go from here?
I created a new partition using Win 8 Disk Management Tool (as shown here [URL] ..... )
When i turned it on again, i saw a message about a failure shutting down the OS. And now i can't start it because it can't fin Operating System. How can i restore it to factory settings?
I got a brand new VOSTRO 3660 with x3 USB 3.0, and since it has no CD/DVD my only option of creating Factory Recovery Image with DataSafe is thrught USB
which is USB 3.0.
I have done some digging before posting, and I understood that I had to enter to the bios and change USB debug Mode to Enable in order to make it work as USB 2.0 (Disable USB 3.0 functionality to install Windows 7 from a USB Flash Drive).
thing is that I tried that several thing to recover the windows 7, deleted the usb flash drive and made several copies and in the end of it I always get to a screen which tells me that "if you are trying to restore your pc from usb 3.0 ................change to a different usb port " .
I know there are a couple of 3x00 Vostro threads, but some are very long and the other did not seem to have an answer for this question.
First, I am very interested in this new Vostro. It seems a good configuration and design for the price. I especially love the 17" screen at < 6 lbs. Seems too good to be true.
Does anyone have experience with this machine? Is the weight including the battery and everything? It is a pound lighter than the 16" Sony F I am using. I like the F, but this Vostro seems a little more in line for me (PhD, heavy stats and datasets). My wife woul appropriate the Sony if I were to pull the trigger on the Dell.
Also, the i5-520m to i7-???qm (dual to quad, differing clocks and all). I am thinking the i5 may be the way to go. Most of my stuff is not designed for 4-cores, 8 threads, etc.
I have a Dell Vostro 3700 which has developed a fault, it will not charge the battery, and windows just shows as "plugged in, not charging.".I have done my research the past few days so I will clear up the following;I have updated BIOS and installed the Dell Battery Manager in order to activate charging as I know it can be disabled.
I have been in the BIOS menu in order to search for an option to supposedly disable/enable battery charging but there is no option in there (unless I missed it, but I have checked several times).BIOS states "adapter type" to be "unknown" and when laptop is first turned on I get a warning to say the adapter cannot be determined and the battery may not charge (which I am assuming leads to the problem).
I have another dell laptop (Studio 1735) that uses the exact same adapter type. Both adapters work and charge in my 1735, both don't work in the Vostro (which I assume eliminates the adapter as a suspect).I have purchased 2 new batteries off eBay, one genuine that is supposedly new although slightly used, and another brand new rip off, all 3 of the batteries will not charge (which I assume eliminates the batteries as suspect)
I bought a Vostro 3700 i7-720q used on ebay. After I bought it I found it would freeze. I eliminated everything I though it could be (i/o conflict, drivers, etc) and nothing worked. This was probably the reason it was sold on ebay. I noticed how hot the machine and fan got. I researched upgradeding the cpu to an i7-940xm and when got the chip planned to put in best thermal transfer to solve the freeze up problem I conculded was due to heat. I thought to be Powerstrate xtreme to be the best thermal transfer to use during the cpu switchout.
I pull the heat sink and its obivous why my machine was hot. The thermal past was a crummy job. I cleaned off heat sink with arctic Ice cleaner, put powerstrate xtreme on cpu and replaced the cpu with a i7-940. Boots up and has been running fine AND it is soooo much cooler.
Getting to the heat sink IS NOT an easy task in the Vostro 3700 - I love my Vostro 3700 BUT it is a very delicate task to remove the keyboard, palm rest and base in order to get to the motherboard and heatsink. I wouldn't do it again.
I'm planning my next notebook purchase and wherefore interested in fan noise levels of those two models. Does it have a high-tone annoying pitch as stated on e.g. ThinkPad 410?
After an automatic update of a Dell Vostro 3700 laptop with Windows 7 on it, I got the following problem :
- First, I got the black screen with the information "Applying update operation 3 of 18014 (_0000000000000000_) - Then it shows a quick blue screen and then the computer restarts directly. - I have been able to display the complete blue screen message. Here it is :
STOP : c000021a {Fatal System Error}
The initial session process or system process terminated unexpectedly with a status of 0x00000000 (0xc0000034 0x001005b0). The system has been shut down
I tried to start the recovery tools of Windows but it keeps on saying that it's not able to recover the system. With this information :
- Start in safe mode : Always the blue screen - Restore and old version : Same recovery error message - Start in command line : always the blue screen.
I lost the restore partition on the original SSD that my Yoga 13 shipped with. Is there a collection of drivers and whatnot that would allow me to restore it to factory defaults on my own with a fresh windows installation? I have the win8 key from the BIOS but don't want to lose out on all the required drivers if I were to just reinstall windows myself.
I bought a used vostro 3700. I need to change the boot sequence, but it will not let me into the setup without an admin password. What that password is. Previous owner is unknown. What can I do?
I've created a MSDOS boot disk on a USB thumb drive for a legacy application. After selecting F12 and booting from the USB thumb drive, the bootup stops or freezes. I'll power off the machine, boot back into windows, and try to read the USB drive. One of two things happen,
A. the drive is corrupted with gobbeldy characters or won recognize at all, or B. files will be deleted, autoexec.bat, config.sys, command.com
There is no rhyme or reason, I've replicated this 20 times and got different results. I've used 5 different drives, two of which are brand new. Sometimes the laptop will freeze with a solid loud beep. I just was able to find an identical 3700 to test, and the same things are happening.
I've been able to boot this on over 20 different laptops, all core 2 duos, but moving to the core i3 on this 3700, this happens. Unfortunately I have no other newer machine to test this on, although it booted from a 3 month old compaq with an AMD chipset.
I've disabled/enabled the execution bit in bios, other than that what's causing this, I've never seen a BIOS do anything like this before.
I'm trying to restore my SXPS16 back to how it was when i bought it using the recovery partition. But when I go to the advanced boot menu the option to do the factory restore is missing.
I know I can do a clean windows install using the CD that came with it but I'd rather just have it the way it was when I first got it.
Does anyone know of a way to fix this, or otherwise, is there another way to do a factory restore?
I am trying to restore my laptop (studio xps 16) to factory settings using the recovery image. If I look in my computer, i can see C and D drives.
D is my recovery partition with 7gb full out of 10gb. This is good and dandy except when i open the D drive, there is one folder that says RECOVERY that is empty. Why is it empty when there are 7gb's of files in there? I already have hidden files shown
I have a Aug 2006, Dell E1505, 1.83 ghz, 1 gb ram, ati 256 1400 etc etc + 80gb HDD (note) win XP & media center
for last three year never formatted my system, it was going good... recently some virus attack happend and it made my notebook verrrrrry slow, so i did the famous Ctrl + F11 !!
follow mark mck's bloatware removal, did a hdd defrag for non-c drive.
But my question is, even after everything the system is not running as fast it did in 2006
boot time is ~1min, shut down is 35 odd seconds...
So, my 2 cents say that after long usage, even if you do a factory restore DO NOT EXPECT a out of the factory hardware/speed, all u get is out of factory windows settings and bloatware ((
trying to do a factory image restore on my Studio XPS 1640. I've done this before on other Dells but this one I don't see the Dell image restore option as said in the booklet.
I don't see the Dell Facotry TOols either. I just have the following: startup repair, system restore, system image recovery, windows memory diagnostic, and command prompt.
I chose system image recovery and it doesn't pull up anything - it's for my own images I made. No option to pull up my Dell factory image which I still have in it's own seperate partition.
recently got hit with a bunch of trojans when using Internet Explorer. I managed to clean them off or so I thought. Periodically, when I open Internet Explorer my virus scanner detects a trojan.
Since the original trojan screwed up my computer to a degree I had decided to reload my operating system anyway.
If I hit F8 at boot and do a factory restore will this reload the disk to the state it was in when I originally received it? Will this also get rid of these viruses that seem to still be plaguing my system?
I would like to restore my XPS M1530 to factory defaults. I saw on the recovery drive a file called Factory.wim Can I use that file to restore factory defaults? I would like to format the drive and start from new again if possible. Do I need the disks that were sent to me with the laptop or is all of the info on the recovery partition?
I got rid of multiple malware problems, but I still don't have sound when going to youtube e.g., as well as can't install anything. Therefore I think the best thing to do is to reset the computer to factory settings.
cannot access the Dell back to factory condition in my young daughters Inspiron 6400, Ctrl - F11 I get no response except a load bleeping, is there any other way of accessing it?
We have a Dell E6330 that is running Windows 7 Professional on it. we need to set this Dell back to factory defualts but do not see an option to do so. I know that it does have a recovery partition but I do not see a way to access it.
I have a Inspiron 5437 with windows 8.1. I'm unable to boot it past a blue box asking for the system password. I don't have that password. My wife and daughter had somehow set this password up. before this I could not get windows 8 to open without a password. I do not have either of the required passwords. Is there a way for me to easily restore to factory settings? hey have no data on the computer that needs to be saved.
I bought my new latop in October and would like to restore it to it's origional factory settings, however I have been unable to do this as I have been told a number of different actions to try by PC performance and none of them work:
First I was told to press f8 on a reboot then select repair my computer so I pressed f8 and there was no option to repair my computer;
Second I was told to restart and press f12 insert a blank dvd and boot using cd/dvd which would create a boot disc which in turn would restore to factory settings, after choosing boot from cd/dvd my laptop just restarts as normal without creating a boot disc;
I was then told to burn recovery (which was on a small drive D:) to disc first then boot from cd/dvd which has no effect again windows starts normally.........
So I had a look around this recovery file and found a setup icon that said factory restore when I clicked on it, I got the message ERROR: the factory image could not be found please reinstall using the operating system media dvd.
I have pushed the f8 button every way I can think, before the windows screen, after the dell splash, the whole time, and cannot get to the factory restore menu.
