I installed Windows Vista but finally I would like to restore my computer with the Dell factory restore.
At boot, I press F8 but there isn't the "Repair my computer" option anymore...
How can I restore my M1530 with the Recovery partition ?
I lost the restore partition on the original SSD that my Yoga 13 shipped with. Is there a collection of drivers and whatnot that would allow me to restore it to factory defaults on my own with a fresh windows installation? I have the win8 key from the BIOS but don't want to lose out on all the required drivers if I were to just reinstall windows myself.
View 1 Replies View RelatedI have a pavilion dv7-6b50ei notebook pc bought 2012. It always gives a command prompt pop up which doesn't stay long enough to read. I also felt there's a virus on it which my anti-virus couldn't solve so I tried factory resetting but when I restart and press F11 it gives an error(something like a boot.. is missing). so I tried my recovery discs. Disc 1 of 4 ran fine but disc 2 keeps stopping with an error.
Now the laptop doesn't load as I think the OS has been formatted during the recovery and don't know what to do. I feel disc 2 is bad too because it also gave an error while trying to copy it to a USB pen drive. I have also tried an external dvd and run the hp test on the hard drive; the hard drive passed the test. If I can get a new set of recovery discs, it would solve my problem.
I would like to restore my XPS M1530 to factory defaults. I saw on the recovery drive a file called Factory.wim Can I use that file to restore factory defaults? I would like to format the drive and start from new again if possible. Do I need the disks that were sent to me with the laptop or is all of the info on the recovery partition?
View 2 Replies View RelatedI just bought a used Red E520-1143CTO in brand new condition, from someone who screwed up the OS (It had Windows 7 Home Prem 64). A lot of the drivers were missing and not working correctly. The restore partition is still there when I look in My Computer but when i reboot and press F11, I never get the option to access it. There was no Lenovo software installed to create a repair disk and of course, it didn't come with any software. Is there a way to access it?
I also have access to another E520 that is almost exactly the same (It just has the older i3 processor). I tried to create a repair disk from it and use it on this computer but it says the Windows versions are not compatible or the Repair software is not compatible with this version.
So I'm trying to figure out if there is an alternative way to access this restore partition. I've installed a company version of Windows 7 Enterprise 32-bit on this machine and I've got most of the drivers installed and it appears to be working fine. But I have three that have yellow exclaimation points:
1) Base System Device
2) SM Bus Controller
3) Unknown Device
I've been downloaded drivers from this site, but I can't can't figure out which drivers I need to clear this list. So, how to get it restored to factory default. If not, I'd like to know what drivers I need to clear this list. I want it to look like brand new because I was going to give it to someone as a gift. I just don't see the on screen prompts for the wifi button (doens't work), volume, and brightness like the other machine. I'd like to get all that working.
I recently bought the XPS 15 and decided to reformat the drive with a clean win7 64bit install using the drivers CD to assist leaving the Dell recovery partition in place
I may now be selling, so attempted a Dell factory restore from the Dell restore partition using F8 on reboot
Following the manual, I hit F8 but cannot see anything relating to the Dell recovery options only win7 recovery options
I did upgrade to the latest bios from the Dell XPS 15 drivers site but surely they wouldnt have removed this options
I have no recovery CD/DVDs either. Why I cant see the F8 recovery options and whats the best option to factory restore?
I'm trying to factory restore my HP Compaq 6510b with Vista. I've not got a recovery disc & laptop didn't come with 1 either. F11 option doesn't work however F8 allows me to access the Advanced Boot Options however there is no repair your computer or system recovery option on the menu.Also there is no recovery manager when searching at the start menu.System restore option doesn't seem to be much supportive as the date available only seems to be in the last few days.Am I wasting my time trying to factory restore or is it time to finally upgrade my once trusty & reliable laptop?
View 5 Replies View RelatedI bought a Dell Inspiron N5110 last year. I created two more partitions on my hard drive. Now I want to restore my windows to factory settings, but I cannot go through the restore process.
I am quite sure that the restore partition is physically on the hard drive, but maybe because of creating new partition it cannot find the drive, or the restore program looks to wrong partition. How can I recover with the current conditions.
Recently I installed trial version of Windows 7 64bits on my Vostro 1014 (which originally had 32 bits Windows 7). I choose clean installation, which erased recovery partition. My laptop came with no CD. I want to restore my laptop to original settings.
View 2 Replies View RelatedPavilion G6-SS40SA running Windows 8. I am working on this computer for a friend. Somehow, he managed to get an app on there which ran at startup and resulted in it slowing down internet access to a crawl as well as making the machine virtually unusable . In an effort to get rid of it, he attempted running restore. However, neither destructive or non-destructive options would work. He was getting error messages - firstly 'Unable to reset your PC. A required drive partition is missing', followed by 'The drive where Windows is installed is locked. Unlock the drive and try again'. I managed to locate the program that was causing the problem, and uninstalled it. He asked me to reset the computer to factory state, but unfortunately, this will not work - it starts up, warns that all data will be lost and I confirm that I want to proceed. It then appears to start the process, but almost immediately ends shows a message saying that no changes have been made. Where do I go from here?
View 2 Replies View RelatedI don't have the recovery partition on my system anymore, but would like to reset my Ideapad Yoga 13 to factory status. Is this possible somehow? All the guides I've seen assumed that my recovery partition was still intact.
View 2 Replies View RelatedI had two of the same Windows 8.1 OS on my Y500 (Cloned from original to SSD). Then Last night I tried to 'refresh without affecting your files' option for my OS on the HDD so I have a fresh OS to go back to incase anything happend. then on the Lenovo screen it said that the E: drive was being refreshed as well so I freaked and turned off the computer. NOw I cant access either of the OS's. What should I do? I did do a back up right before and the back up files are still there in a partition I made in the HDD. I used a USB boot of Puppy LInux to see the files on my HDD but it would not let me transfer it to an External Hard Drive. I will Try to install a better linux and try to transfer the OKR files to another Drive.
-how would I go about restoring the back up files if I were to get them on another drive?
I purchased my T420 one year ago and have sufficiently "hosed it up" to the point I wanted to do a factory restore. I saved all my data then proceeded to create the CDs from the Q drive factory restore. I followed the instructs for more and more CDs and once I got up to #12 I noted that the time it was taking to create them was down from several minutes to several seconds. When I got to CD number 18 I thought "this is ridicules" and I popped CD 11 back in to look at its content (via Windows Explorer). I noted it had two folders: 1) Factory restore (or something like that) which was over 500 MB in size and 2) something about data. This "data" folder contained 1 KB of data. I then looked at all subsequent CDs (12-18) and they all only contained this data file. So, rather than continuing to make these (basically empty CDs) I stopped.
I then put the first CD in and rebooted the machine. The factory restore started and I swapped CDs until I got to 12. I put 12 in and it said the required data was not present and to insert the next CD. I did this until I ran out of the CDs I had created. I had to "X" out of the restore app and now when I boot I get nothing but a dimly lit screen and a flickering hard drive light! Am I totally hosed here? How many CDs would it have required had I kept making them? I am ( obviously) a novice.
ATrying to do a complete System Restore, and
"WARNING: Your laptop is currently running on battery power. Recovery Manager requires that your laptop is plugged into an AC power outlet."
...but charger is plugged in. Let battery run down a bit and plugged it in, and got same error while it was actively charging battery....
I have a Pavilion dv7-1103ea laptop which I need to restore to factory settings. I created a recovery disk from the system but it has become corrupted. I gave my laptop in for repairs to a local repair shop. My laptop is now working but it is not in the same format as when I purchased it. Is there any way of restoring the laptop to its original format?
View 1 Replies View RelatedIs there any way to restore the recovery parition (D if I deleted that partitino when reinstalling Vista?
View 10 Replies View RelatedJust to state first and foremost, this is not an issue I have. This is a preventative post for anyone that may ask down the line. (as I've seen it asked on multiple other forums.)
I had this issue with an inspiron 1720 I just got. It had an issue, so I installed vista from a Vista RTM disk. It didn't fix the problem in the end, so I sent it into dell and got fixed, but I wanted to a fresh restore from the restore partition because on restarts, I'd get the blue screen of Death. Fun stuff right?
Well, Unknowingly, when I installed vista off of the cd, that removed the ctrl+F11 option from the dell. This is stated on many forums, and it seems that most answers to this issue is to format and install a fresh install from cd again, or call dell and get recovery disks. I figured "Heck, If I still have the restore partition, there is not reason why I can't get it to restore with some effort."
Some other people I've seen have just had viral attacks, or just want to sell their laptop and need a fresh install. This is for those people that need it. The answer to the question of what if Control and F11 don't work.
So, Here I am with the fix. There is one required bit of software that's required, and that is simply a dos boot cd. You can find many iso's for dos on the net. All you have to do is burn a copy and boot from it. [EDIT] IMPORTANT: I was wrong about dos. As stated below ( http://www.notebookforums.com/post3049150.html ) you have to do it from a 32 bit environment. You can get through one in the XP repair console (on the install cd) or through one of the options in vista's setup.[/EDIT]
Ok, so this is going to be dumbed down a bit, and I'll explain what the dos commands do. First off, after booting into dos, you need to change to the restore partition. This isn't hard at all, all you do is type "D:" and press enter. After this, you need to find the restore file. This is a file with the extension of *.wim. This is an image of windows from dell factory.
Generally this file is found in d:dellimage and is called Factory.wim. Just to double check, I'm going to tell you to change the directory. Type in "cd dellimage" and press enter. In dos, CD means Change Directory (or enter a folder). Now, to list all of the files in the directory type in "dir" and press enter...............
I have been given an Acer 6930G by a family member to setup. After realising there's 0 discs included with the laptop, the Acer pop up message tells me I have to make my own factory default image. I have successfully made it on 2 DVDs, my question is now in the manual there is nothing about how to use it, I was wondering if anyone can share any insight to me as to how it works.
Basically I know it is probably a bootable DVD as the root of the DVD suggests (several "BOOT" files) I was wondering how it actually looks like? I haven't tested it yet as the user was extremely desperate to get it running so I had to give it up the moment the DVDs were made.
If I put the DVD in and select to boot from it at start up (before getting into windows) does it take me to some sort of custom screen where I can SELECT that I want to reformat and restore the laptop? I want to know what options I am given and I can only assume that it's the same for most laptops.
And I can only assume again, that if I factory restore it, it will come back with Vista activated and all the initial bloatware again, along with all the drivers for it (so I don't need to go track them down).
This is all I need to know, I wish I can test it but I can't even get the laptop back now (until it breaks ...)
If someone can post their experiences with it I will be grateful, this is just more for reassurance than anything, and confirm my assumptions? Many thanks in advance!
EDIT: I have discovered that I can launch that recovery app by pushing ALT+F10, I have managed to wrangle the laptop temporarily to test and have discovered that I can choose from 2 back up options, but I dare not go any further, can someone tell me the next steps? One says factory default, and the other is user's backup.
I can guess that if I choose the first option, factory default, it'll ask for the DVDs I have created? And the 2nd option will restore a backup I made selecting the user option on the recovery app.
I'm trying to restore my SXPS16 back to how it was when i bought it using the recovery partition. But when I go to the advanced boot menu the option to do the factory restore is missing.
I know I can do a clean windows install using the CD that came with it but I'd rather just have it the way it was when I first got it.
Does anyone know of a way to fix this, or otherwise, is there another way to do a factory restore?
I am trying to restore my laptop (studio xps 16) to factory settings using the recovery image. If I look in my computer, i can see C and D drives.
D is my recovery partition with 7gb full out of 10gb. This is good and dandy except when i open the D drive, there is one folder that says RECOVERY that is empty. Why is it empty when there are 7gb's of files in there? I already have hidden files shown
I just picked up a laptop and I want to do a fresh install of xp. Problem is I don't have a disk. The computer still has dells partition I believe (windows says the HD is 37.3 but it's really a 40). Will the restore partition accomplish what I want?
View 14 Replies View RelatedI have a Aug 2006, Dell E1505, 1.83 ghz, 1 gb ram, ati 256 1400 etc etc + 80gb HDD (note) win XP & media center
for last three year never formatted my system, it was going good... recently some virus attack happend and it made my notebook verrrrrry slow, so i did the famous Ctrl + F11 !!
follow mark mck's bloatware removal, did a hdd defrag for non-c drive.
But my question is, even after everything the system is not running as fast it did in 2006
boot time is ~1min, shut down is 35 odd seconds...
So, my 2 cents say that after long usage, even if you do a factory restore DO NOT EXPECT a out of the factory hardware/speed, all u get is out of factory windows settings and bloatware ((
I am trying to get my Studio 15 to factory conditions but I am running into two BIG problems:
1) When I press F8, I get no option to "Repair Your System"
2) The Dell Vista reinstall disk does not have to option for OS Restore on it
trying to do a factory image restore on my Studio XPS 1640. I've done this before on other Dells but this one I don't see the Dell image restore option as said in the booklet.
I don't see the Dell Facotry TOols either. I just have the following: startup repair, system restore, system image recovery, windows memory diagnostic, and command prompt.
I chose system image recovery and it doesn't pull up anything - it's for my own images I made. No option to pull up my Dell factory image which I still have in it's own seperate partition.
recently got hit with a bunch of trojans when using Internet Explorer. I managed to clean them off or so I thought. Periodically, when I open Internet Explorer my virus scanner detects a trojan.
Since the original trojan screwed up my computer to a degree I had decided to reload my operating system anyway.
If I hit F8 at boot and do a factory restore will this reload the disk to the state it was in when I originally received it? Will this also get rid of these viruses that seem to still be plaguing my system?
I just bought a Vostro 3360 with Win 8.
I created a new partition using Win 8 Disk Management Tool (as shown here [URL] ..... )
When i turned it on again, i saw a message about a failure shutting down the OS. And now i can't start it because it can't fin Operating System. How can i restore it to factory settings?
my computer is a
Inspiron 14R (N4010, Early 2010)
MS Windows 7 64 bit
I got rid of multiple malware problems, but I still don't have sound when going to youtube e.g., as well as can't install anything. Therefore I think the best thing to do is to reset the computer to factory settings.
How to perform a Factory Restore, from the Restore Partition. I'm unable to boot the computer. into windows.
Last time I recall it was CTRL-11 upon boot, didn't work for me.
Windows 8 Pro
Dell XPS 14 Ultrabook
cannot access the Dell back to factory condition in my young daughters Inspiron 6400, Ctrl - F11 I get no response except a load bleeping, is there any other way of accessing it?
View 4 Replies View RelatedWe have a Dell E6330 that is running Windows 7 Professional on it. we need to set this Dell back to factory defualts but do not see an option to do so. I know that it does have a recovery partition but I do not see a way to access it.
View 1 Replies View Related
