Acer :: 1410 Broken Hinge Options
Mar 16, 2010
i dropped my netbook last night and cracked the left hinge. the hinge itself actually seems like a two piece and snapped back together, however it looks like it completely broke off the body.
the netbook looks like it still works, but im wondering what my options are, if any?
im assuming the standard acer warranty doesn't cover this...is it worth trying to fix myself, or is that even possible? should i just pray it keeps working and just hope for the best?
View 5 Replies
ADVERTISEMENT
Mar 12, 2009
I purchased a fw235j notebook about two months ago and the circular hinge near the charge port popped out so that it sticking out very loose, preventing me from shutting my computer. I think it happened because of the tension of the charger plugged into it. Sort of hard to exlpain, but if you own this notebook you know what part I'm talking about. (And if you don't own it i would recommend against it just because of this serious design flaw lol).
Has this happened to anyone else with a fw235j? If so what did you do to fix it? I tried forcing the piece back in so that i could shut the comp but that isn't working. It looks like a little plastic piece might have snapped off but it's so small that I can't tell for sure. I imagine this could be a pretty common problem because of the way this piece was designed. I mean, mine broke after 2 months of normal use (no falls or anything).
anyway, my computer is still functioning fine-it can still charge, its shuts down and boots up fine. but because of that piece it won't shut which is more than just a little bit annoying.
View 3 Replies
View Related
Jan 6, 2010
the hinge on the left side of my Vaio FW290 laptop just broke, and it's conveniently 1 month after my warranty ended - not that they would have covered it anyways, they probably would have called it physical damage and not under warranty. The hinge is completely seperate from the body and it just flops around, and that's not good considering it is where the power cord plugs into the laptop. I want to replace it, and I have no problem doing it myself, but I don't know exactly what part(s) to get.
I know this is a common problem with this model, so I was hoping someone else here has repaired theirs and could tell me what parts I need. I found a place that sells virtually every replacement part imaginable:[url]. I guessing that the part I need is one of these two:
HINGE LEFT: [url]
LCD BKT LFT: [url]
LCD HINGE COVER-LFT: [url]
View 10 Replies
View Related
Sep 2, 2009
Broken left hinge is a known problem in HP Pavilion dv9000/dv9100/dv9200/dv9400 notebooks.
HP was fixing this issue at no charge but not anymore. The warranty program has expired on May 31, 2009.
I just finished step-by-step repair instructions.
Check it our here: How to replace broken left hinge in HP Pavilion dv9000
Make sure to use correct hinges. They are different for LCDs with single lamp and LCDs with dual lamp.
View 10 Replies
View Related
Feb 15, 2009
I have a 5920g computer which I adore, sadly we always hurt the ones we love, I dropped it and broke the right hinge, because of that the plastic frame of the monitor ripped 2. It still works perfectly fine, but its annoying as hell to watch my lappy like this all the time. I called acer, and found a provider who can repair it for 400 dlrs (I payed 1000 dlrs for the lap) so well, its seem outrageous to me paying 40% of the total price for a hinge replace.
Anyway, I found the hinge and the other parts on Ebay singapore, for less tan 100 dlrs. So, heres my question, does anyone know how hard is it to replace this parts, I am a mildy medium kinda handy guy, with some hardware skills. So anyone know if this is hard, is there a guide around that can show me the process, or should I just pay the 400 dlrs and get this thing done.
View 15 Replies
View Related
Oct 20, 2008
Our Acer 5920 is less than a year old, but not by much so I gotta make a decision soon. I'm hoping to get some help from you folks.
There's a little crack in the frame surrounding the LCD screen. I attached an image.
This laptop has seen very limited use. I use a strong, well padded case when transporting.
I called Acer. A gal said I can send it to them, they'll make a determination whether it's covered or not, if not they'll call me and tell me how much it'd cost to fix, etc.
I'm not thrilled about sending it to Temple, Texas. Besides, what are the chances Acer will do the right thing and fix it?
Has anyone seen this kind of damage?
whether it's mostly cosmetic? I'm assuming the plastic shell doesn't actually do much, and that there's a metal hinge underneath that does most of the real work, but I can't tell for sure and have never taken apart a laptop.
View 5 Replies
View Related
Mar 11, 2010
I bought an Acer 1410 with default OS of Windows XP. Now I want to install a new Windows. Which windows is better for a good battery performance
Windows 7
Windows Server 2000
Windows Vista SP2
and one more question. Acer 1410 works with x64 or x86 OS?
View 8 Replies
View Related
Nov 14, 2009
In August I purchased an Acer 751h, 2GB RAM and 250GB HD. It came with Vista, which was pretty awful, but since I installed Win7 on it, I don't want to put it down because it performs so well. It's BLAZING fast, a great little machine and I absolutely love it.
My mother needs a new computer and she really likes mine. I'm considering giving it to her and getting myself the new 1410 - what do you think? Does the new processor in the 1410 make that big a performance difference?
In the benchmarks I've read, even the single core version (apparently there is also a dual-core 1410) is twice to three times as fast as the Atom in my 751 - that's pretty impressive.
I can only imagine that the 1410 with a clean install of Win7 would absolutely FLY. It would also be nice to have the different touchpad buttons and wireless N.
What do you guys think of the 1410?
Also, is it worth it to get the dual core model over the single core?
Also to confirm, the 1410 has VGA-out AND HDMI? This would save me from buying an adapter for when I need to give presentations, as most projectors are VGA-only.
View 8 Replies
View Related
Dec 1, 2009
I just had a blue screen of death (dump screen) for the third time in 2 months and after reboot, i get this screen:
What can i do now? I would like to recover the files i have in the HDD, as i know if i send this to Acer, they'll wipe out everything or replace a new HDD. Can i open the laptop and try to plug the HDD to some enclosure to get the files out?
Will that void the warranty?
In the BIOS, i see:
HDD Model Name: None
HDD Serial Number:
ATAPI Model Name: None
View 10 Replies
View Related
Feb 24, 2010
My 1410 has a problem with the display out function. It works fine with both the HDMI and VGA output when the lid is open. However, when I close the lid, the display is okay for a couple of seconds then it flashes on and off intermittently on the display that I hooked it up to. It happens with both the VGA and HDMI output signal. It only happens when the lid is closed, even though I set the computer the do nothing when the lid is closed. I thought it might be a software/driver issue, but I installed the most recent chipset and VGA drivers from the acer website with no change. This is an important feature for me to have because I use the computer with an external display the majority of the time. I am running windows 7 home premium 64bit. Their tech support has told me that Acer computers are set to not work with an external display when the lid is closed.
View 10 Replies
View Related
Sep 23, 2009
I have a Gateway EC1803h which as far as I can tell is identical to the Acer 1410 except for the design of the case, so I'd like to ask this to the Acer users since there are many more with the 1410 than the Gateway.
I'm running Windows Vista. I've disabled the ACPI Lid driver by changing the driver to "Volume Manager" as suggested by various internet sources for fixing the problem where closing the lid, even with the close lid action set to "do nothing" can cause the lcd to not turn on again when opening the lid.
So the problem is with hibernation. If I hibernate the machine, then resume again within let's say a minute or so, it comes back up fine. If I hibernate, then wait a longer amount of time, say 10 minutes, I can see the BIOS boot, the "Resuming Windows" splash screen, but then when I'd expect to see the login screen, instead the laptop screen turns off, and I see nothing. Oddly enough, at this point, if I plug in an external monitor, I can see the login screen there, so the OS is running properly. I can even log in. But at this point, I cannot Fn+F5 to enable the laptop screen. It's like the laptop screen has been disconnected/disabled/removed, whatever you want to call it.
Another weird symptom is that at this point, I can usually see a "System" process that ends up taking up 100% of the CPU processing, all of the time (not just spikes), so the task manager basically stays at 100%.
This feels like a software/driver issue to me, but I've been unable to find any other Acer 1410 or Gateway EC1803h users who've experienced this. I've tried the video drivers on the Gateway site, Acer site, as well as drivers from the Intel site. Same behaviour. I'm contemplating exchanging it for another unit, but only if there's a chance this is indeed a hardware malfunction.
View 6 Replies
View Related
Oct 1, 2009
I know this laptop was not designed for games and that's not it's primary purpose for me. However, I just wanted to see if we could have a list of the games that are confirmed to work on the Acer 1410.
I'll start. I tried Civilization 4. Works perfectly.
View 10 Replies
View Related
Aug 18, 2009
Looking to pick up a laptop/netbook very soon and I am pretty much sold on going with the 3810TZ but now I am seeing a lot of talk about the 1410, which unless I am mistaken, is lighter than the 3810TZ, smaller, faster (not by much but has a 3500 cpu vs the 2700) and cheaper (450, vs best deal I can find on 3810 which is 550). Same features/memory/etc?
Any actual knowledge of when the 1410 will be released? I need it very soon (for a trip in a few weeks) and i cant tell from reading these forums if it will be out then or not until october.....
View 10 Replies
View Related
Sep 18, 2009
Is it possible to install an internal bluetooth? is so what is the product called?
View 10 Replies
View Related
Jan 21, 2010
I Cant get 5.1 DTS spdif audio on my Windows 7 64 bit 1410 Acer laptop using ac3 with toslink into receiver. I'm hoping my laptop supports surround sound output but I fear it may not. I downloaded the full AC3 version since I'm using 64 bit OS. Under config speakers with windows media center I setup 5.1 speakers and clicked test and I did get a specific sound to all my speakers through my receiver. Also when I click speaker icon on bottom right of screen to get realtek digital output properties/ supported formats - I click test sound for DTS and I also get a separate ping to my 5 speakers. Under realtek advanced tab however I notice default format is limited to two channel.
Under ac3 filter config main tab I set speakers to 5.1 and checked use spdif. Under spdif tab I checked use spdif output format to 5.1. spdif passthrough I checked DTS and AC3. Under spdif/DTS mode I tried all 3 settings- auto/padded/wrapped. I'm only getting 2 channel digital audio. I think AC3 is not working right because while playing a DTS movie I don't see a AC3 icon on system tray and when I turn on ac3 config while still watching movie, SPDIF status says No data and I don't see any green spike bars for audio levals. Do I need to force AC3 to work somehow? Do I need a different mediaplayer to use as a front end? Or do I need additional software/ codecs like hailsplitter or something?
My AC3 must be working a little bit because before I downloaded AC3 mkv's would refuse to play at all. I have divx 7 by the way for video support of mkv's. I noticed even after I downloaded divx 7 for mkv support mkv's still wouldn't play without AC3. I'm using windows media player and windows media center for movies.
View 6 Replies
View Related
Nov 14, 2009
As you know the default OS of Acer 1410 is Windows XP, and the battery life is about 6 hours; if I install Windows Vista or Windows 7, how much it will affect my battery life?
View 4 Replies
View Related
Nov 21, 2009
I have an old Sony Vaio VGN-FS742/W and just got an Acer Aspire 1410. The 1410 has a 2GB PC2-5300 (333 MHz) stick of RAM. The Vaio has a 1GB stick of PC2-4300 (266MHz) RAM.
I've read that running two RAM sticks of different speeds makes them both run at the speed of the slowest stick. Could any advise whether my 1410's performance would be better by adding the 1GB from the Vaio to have 3GB RAM running at 266MHz, or just keep the 2GB already in the Acer running at the quicker 333MHz?
View 5 Replies
View Related
Feb 24, 2010
I'de need a pic of the mobo of a 1410/1810 after the TME mod for overclocking...
View 5 Replies
View Related
Nov 16, 2009
I just bought an AS1410 SOLO last month and yesterday it would not boot up at all. Called Acer tech support and they said send in for the warranty work on the notebook.
The thing is I have to pay for the shipping and to send in their defective product. Is it Acer policy? If it is then it sucks. I have a ThinkPad T43p and when I needed to send it in for warranty work, Lenovo sent me a prepaid box and all I have to do is drop the box off at any UPS store. I forgot to mention that the tech support personnel, their attitude are like I don't give a damn about your problem, you're already bought our product and you need our support now. So give it another thought before you buy any Acer product.
View 10 Replies
View Related
Oct 23, 2009
I have been trying to load a retail version of Windows 7 HP x64 using USB on my Windows Vista HP x86 Acer 1410. I am able to boot from USB and the Windows 7 install program starts. I select Custom Install to do a new installation (not an upgrade). After I select the partition to install to, I get an error message like "can't find a system drive to install to..." I have tried this on two different 1410's with the same results.
It was the particular USB SD Card Reader I was using. I don't have a 4GB USB drive so I was using a USB SD Card reader and an 8GB SD card. I switch to a different Card Reader (same 8GB SD card) and it worked first time!
View 10 Replies
View Related
Nov 12, 2009
I have till Friday to exchange my Acer Aspire 1410 SU 3500 for the SU2300. I am seeing some people show the benchmark is much higher for the SU2300. Of course I would like to have the faster unit and better unit since I am spending $400. I dont do much gaming but I do alot of videos and work. am I better getting the Dual Core or just keeping my Single Core ?
View 10 Replies
View Related
Nov 20, 2009
I decided to give the PLL mod a try so I can overclock to 1.7GHz in my 1410. I got ahold of a soldering iron and an old motherboard that I practiced on, and it doesn't seem too bad once you get the hang of it.
Now that I've decided to go ahead, I try to take the case of my Aspire 1410 apart, and with all the screws removed, hard drive, memory, wireless card, I can pry the front of the case open ok, but as I get near the back (fan exhaust one side and lock/ethernet other) It seems locked in place somehow and don't want to break anything.
Is there a guide or service manual or something?
View 10 Replies
View Related
Dec 20, 2009
I keep hearing 4 gig support, but Sis soft Sandra tells me my 1410 supports 8 gigs of memory.
I dont know if anyone has commented on this, and just dont have time to comb through the pages on the two 1410/1810 threads.
View 10 Replies
View Related
May 8, 2010
Intel's website says that the GS4500 chipset supports up to 8GB of RAM.
[url]
Don't the 1410 and 1810 use that chipset?
Has anyone tried running 8GB of RAM in these units?
View 8 Replies
View Related
Oct 17, 2009
Anyone who has the Acer Aspire 1410 been able to play Battlefield 2? The game installed fine. Any time I go to start it, the screen flashes a few times like it's loading, then just dumps back to desktop. Has anyone successfully installed and played Battlefield 2 on this machine?
View 10 Replies
View Related
Dec 18, 2009
I found a couple other reviews where people said they had a noticeable (more so on dimmer settings, for me) screen flicker with their timelines. I have the 1410 with su2300 proc. Anyone else noticing this problem? It's enough to distract me, which can be annoying, but I'm a bit of a perfectionist when it comes to the visuals.
View 10 Replies
View Related
Nov 28, 2009
I have the Aspire 1410 -2285 with Windows 7 and the Celeron SU2300 Processor. The AC power supply clearly shows the specifications as 19 volt, 1.58, amp, 30 watt. I want to purchase another adapter but everywhere I search lists the adapter for the 1410 as 19 volt 3.42 amp and 65 watt. This include Amazon. Can I use this AC adapter with this computer.
View 10 Replies
View Related
Mar 8, 2010
I purchased the Acer Aspire 1410-2920 less than two weeks ago, and I seem to be having some issues with mine. I'd love to know if anyone here has experienced these issues as well. I've been using it and have been enjoying it, but now I'm having second thoughts with it and am considering exchanging it for something else. I'd rather not go the exchanging route, but it's something I'm seriously thinking about.
-- ISSUE #1 / LOOSE HINGES --
As posted in another thread created by me about weak hinges on my1410, I'm currently on my second one since the first one had loose hinges. The hinges on my newer one are better but definitely not as firm/strong as I'd like them. Is this normal? Is there any way I can try tightening them myself?
-- ISSUE #2 / HEAT ISSUES --
It gets freakin' hot after only using it for 20-30 minutes. Is that normal? I have the 1810tray application installed, and even if I have the fan set on the highest setting it gets to about 55-57 degrees Celsius. Why does it get so damn hot? All I have running at most times is Firefox and possibly iTunes, but usually not more than two applications. I do notice, though, that it gets incredibly warm when I'm watching video podcasts or movies (MP4s). Anyone else experiencing heat issues on theirs? I've never used a laptop in my life (which I've been using for 15+ years) that gets as warm/hot as this 1410. Is there something I can do to turn down the heat?
-- ISSUE #3 / DOESN'T SIT FLAT --
When it's sitting on a flat surface, all four rubber points on the bottom don't sit flush. The front fright rubber foot doesn't touch the surface, so when you're typing on it there's a very slight rocking motion. When I type it makes the screen rock/wiggle. It's hard to describe it, but it's quite bothersome. Does this happen with anyone else? I can provide a video clip of it if needed, just have to take video of it.
View 10 Replies
View Related
Oct 18, 2009
if these will run on the machines mentioned?
View 10 Replies
View Related
Nov 21, 2009
just got my 1410 SU2300 machine. I did a clean install of Windows 7 Pro x64 and installed the updated Intel drivers for video and chipset from the Timeline Tweaks thread (all the others were from Windows Update). With the Win7 Home Premium that came with the unit, I was able to come out of suspend automatically when opening the lid.
Now, I have to press the power button to get the machine out of suspend. Could it be one of the power management drivers causing this problem? Is there a solution to it, or am I stuck like this?
View 6 Replies
View Related
