Up until recently everything has been ok. I have my 5920G set to screensaver after 5 mins then monitor after 1hr and hibernation after 2hrs. In hibernation the blue standby light around the standby switch would flash orange and the battery light would flash orange too. But for some reason it wont go into hibernation and do this anymore, it just sits there blue with the monitor in standby i.e. black screen,
View 10 RepliesI bought some HD DVDs to play on my 5920 and watch via HDMI on my HD sony TV. The laptop seems to be playing CDs and regular DVDs perfectly fine but it isn't recognising HD DVDs at all.
View 5 Replies View Relatedi have laptop 5920G
after i installed new windows copy , i setuped all drivers but i discovered cooler is nt working as it was b4 i format system partition
its sound was buzzring me b4 whn it work then stop and work again but nw i miss it and feel it can effect laptop performance
here is all drivers which i have
wht is its driver name or where i can find it , hw can i search 4 it ?
about 2 months ago i bought an Acer 5920G, a week or so ago suddenly the touchpad stopped working, i dont recall how it happened, i think i just booted Windows Vista as i usually do and the touchpad didnt work when i tried to click my user name so i could enter my password to logon.
I thought maybe the driver had gone bad so i rebooted and booted Windows XP( on a different partition) and in windows xp the touchpad also didnt work anymore.
Is this a hardware failure? Or are there other possibilities? I tried removing the driver and reinstalling, but it still didnt work.
typing with screen keyboard.
My keyboard is partially not working, launch manager didn't work correct b4 but now some letter keys & even shift keys r not working.
Saying that, my battery came out of laptop (lock was unlocked) when it was shut down, anything to do with that maybe?
I have an acer aspire 5920g laptop that has recently stopped working , when I power on the computer the fan goes on and the power on light also goes on and two other lights flash once but nothing comes up on the screen and the computer never starts the boot sequence....the fan then goes off but the power light stays on , I already put new thermal compound on the processor and graphics card...I tried removing the ram modules , the wifi card and the hard drive ect. nothing seems to work ,
View 5 Replies View RelatedI have a Gateway EC1803h which as far as I can tell is identical to the Acer 1410 except for the design of the case, so I'd like to ask this to the Acer users since there are many more with the 1410 than the Gateway.
I'm running Windows Vista. I've disabled the ACPI Lid driver by changing the driver to "Volume Manager" as suggested by various internet sources for fixing the problem where closing the lid, even with the close lid action set to "do nothing" can cause the lcd to not turn on again when opening the lid.
So the problem is with hibernation. If I hibernate the machine, then resume again within let's say a minute or so, it comes back up fine. If I hibernate, then wait a longer amount of time, say 10 minutes, I can see the BIOS boot, the "Resuming Windows" splash screen, but then when I'd expect to see the login screen, instead the laptop screen turns off, and I see nothing. Oddly enough, at this point, if I plug in an external monitor, I can see the login screen there, so the OS is running properly. I can even log in. But at this point, I cannot Fn+F5 to enable the laptop screen. It's like the laptop screen has been disconnected/disabled/removed, whatever you want to call it.
Another weird symptom is that at this point, I can usually see a "System" process that ends up taking up 100% of the CPU processing, all of the time (not just spikes), so the task manager basically stays at 100%.
This feels like a software/driver issue to me, but I've been unable to find any other Acer 1410 or Gateway EC1803h users who've experienced this. I've tried the video drivers on the Gateway site, Acer site, as well as drivers from the Intel site. Same behaviour. I'm contemplating exchanging it for another unit, but only if there's a chance this is indeed a hardware malfunction.
The operating system went into hibernation when the battery died and would not come out when plugged in again(blank screen after acer splash screen, but i am able to load bios) when booting to the vista cd, all i get is a black screen. i tried a win xp disc and was able to boot to this. I put the hard drive in my desktop computer and when i tried to boot to it i got the error message that the computer was in hibernation and unable to come out of this mode. I then formatted the partition and was still unable to boot to the vista cd so i installed xp, however... after the splash screen and the windows loading screen, i again get a black screen. i've tried removing the battery and unplugging it for a while but nothing seems to work.
View 7 Replies View RelatedI just bought a brand new Acer Aspire 1410 11.6" laptop equipped with the SU3500 processor and GMA4500MHD GPU, 250GB HDD and 3GB memory.
I'm very pleased with my new notebook and have installed Windows 7 free upgrade (it came with Vista installed, which I didn't even bother to test). Now, I'm having some troubles when I'm opening my laptop when it's on hibernation (no problem on boot).
The problem only happens one time out of four (approximatively). When I open the screen, there are vertical lines in the screen (around a hundred) on the whole surface of the screen. I need to reboot to get my screen back to his normal state. The lines are moving when I'm moving my mouse but there is no way to remove it (even if I go again into hibernation and then open it again). Reboot.
It doesn't happen often but it's a little bit annoying, I don't want to reboot my computer half the time after hibernation (obviously).
Is this a hardware problem? As the bug only occurs less than half the time and the lines are moving with the mouse, I thought it was a software problem. But there is no threads on any forum about this issue, and I've already reinstalled the Intel GS45 chipset/VGA drivers.
when i turn on my laptop acer aspire V3 it says (acer explore beyond limits) then it just says hibernating. How do i get it to stop hibernating?
View 1 Replies View RelatedWhen I press the power button to put my laptop in Hibernate mode, the screen goes dark, but the blue LED doesn't turn blinking orange. When I turn the laptop back on, I get the Windows "your computer did a bad shutdown" message, and windows proceeds to do a cold boot.
I installed windbg, and got the follwoing data from the kernel dump:
Bugcheck Analysis:
DRIVER_POWER_STATE_FAILURE (9f)A driver is causing an inconsistent power state.Arguments:Arg1: 0000000000000003, A device object has been blocking an Irp for too long a timeArg2: fffffa80049ce060, Physical Device Object of the stackArg3: fffff80000b9c3d8, Functional Device Object of the stackArg4: fffffa800a867910, The blocked IRPDebugging Details:------------------DRVPOWERSTATE_SUB
[code]....
It looks like the Windows 7 PCI driver causes the crash, but I suspect that means the real culpret is hardware.
I updated to the latest BIOS, but that didn't effect this issue.
I have changed the Windows power settings so that when I close the lid it goes into hibernate mode. However, when I open the lid it does not start the laptop and restore from hibernation. I have to open the lid and press the power-on button and then it restores from hibernation.
I have a much cheaper Toshiba Laptop that just automatically starts and restores from hibernation when I open the lid. As far as I recall there were no special settings that I changed in order for the Toshiba to work like that, just the setting in the Windows power option that permits hibernation when closing the lid. The Toshiba run Windows 8.0.
Does this model Acer have this feature? If so, how do I set it up to work?
My battery on my acer draws power at times when my laptop is plugged in it will work ok then the on and off button will start to blink It will go into hibernation when plugged in when the battery gets to low....
View 1 Replies View Relatedi have laptop Acer 5920G
VGA card NVIDIA GeForce 8600 GT
but its performance very bad and i cant believe its up 2 1024
i barely can play FIFA 2007 and its slow!
is it up 2 VGA driver?
setup icon details say it's version is 9.1.0.429
is their any new drivers 4 it .........
My 5920G which I got for Christmas is giving me some problems.
I have gone to power options and and changed the settings so when I close the lid, nothing must happen. But when I come back in about 20 minutes after leaving the lid closed, there is no way of me getting the LCD to start up. The only way I can get past this is by pressing the power button in for a few seconds forcing it to shut down. Obviously this is bad for my notebook. How do I get this sorted out? The same thing happens if I leave the lid open and come back in a while.
well i have decided to replace the stock thermal paste on my 5920g, however, i was suprised to see that acer used therma pads intead of thermal paste
im even more suprised to see that there are thermal pads all over my gpu and cpu
heres a rough picture of how it looks like
silver color denotes where thermal pads where installed
the weird thing is that the copper plate of the heat sink only touches the parts of the picture with the orange circle
should i put AC MX-2 on the areas where i found thermal pads or just on the areas where the copper plates of the heat sink touches the core
I have the Acer Aspire 5920G. Since my laptop is starting to get a bit too warm, I would like to know the steps in cleaning the fan for my laptop. I already got a can of compressed air. Can someone please tell me the exact steps to clean the fan?
View 8 Replies View RelatedI have had a 5920G for nearly a year and it runs great when it is plugged in. As soon as I unplug it when it is 100% charged, the battery runs out in like 30 seconds.
View 7 Replies View RelatedAcer 5920G won't charge. When I plug in the charger the light that normally comes on to indicate that it is charging does not light up and in windows the icon that indicates that it is charging does not come up either.
My PC is the Acer 5920G best buy configuration, about two years old and no components are overclocked.
I was using it when this happened, I just noticed that the light went off and then it wouldn't charge when I plugged in the charger. As far as I know all the other components work correctly though it does have poor battery life. I was downloading a large file so I had it running for about six hours straight if that makes any difference.
I've checked the charger itself and nothing came loose. The green light on the charger also lights up when I plug it in so it is probably not the outlet that is the problem plus I've tried it in multiple outlets.
I'm pretty sure its either the battery or the charger, but I would like to know for sure and get advice from anyone else who may have had this problem.
Past few days I got my 8600M GT 256MB DDR2 GPU overheated and it is broken now. Sigh!! The system was still bootable and I did even hear the login sound not until today when I just unplugged the HDD and GPU myself. When I put them back together, I won't boot as usual. It stops loading a while after I turned it on and stays freeze until I shut it off.
FYI, I removed the HDD to copy a backup of my content into another PC. While connecting to other PC, I did change some setting on the Ownership of some folder to get it accessible. As for the GPU, I just simply removed it to take a look myself and snap some photo of it, then inserted it back as before.
So, I wonder will these techies stuff I did awhile back could corrupted the bios that would make the system halted halfway.
Additional information that I would like to share is that I have decided to replace my GPU with ATi Mobility Radeon HD3650 512MB DDR2 instead of the original and did learn the method to do so. Read on some info regarding flashing the GPU, but was not sure bout it.
I tried installing Service Pack 1 and it won't boot. Microsoft has just sent me a Vista Home Premium Repair CD that will hopefully fix it. I have Recovery Discs, but then I'll lose all my data. This is the 2nd time that my 5920G has broke like this, is there a huge design flaw with this laptop?
Is Acer always like this? It was such a high end laptop for its price (8600M GT, Core 2 Duo 1.5 Ghz, 2 GB RAM, HDMI, HD-DVD, for $1099), but I can never trust this company again.
I recently bought an Aspire 5920G with geforce8600M GT 512MB and windows vista premium.
My graphics card takes more than 700 MB from the RAM memory.
I would like to know if there's a way to make it take less or even disable this option?
I have a 5920g computer which I adore, sadly we always hurt the ones we love, I dropped it and broke the right hinge, because of that the plastic frame of the monitor ripped 2. It still works perfectly fine, but its annoying as hell to watch my lappy like this all the time. I called acer, and found a provider who can repair it for 400 dlrs (I payed 1000 dlrs for the lap) so well, its seem outrageous to me paying 40% of the total price for a hinge replace.
Anyway, I found the hinge and the other parts on Ebay singapore, for less tan 100 dlrs. So, heres my question, does anyone know how hard is it to replace this parts, I am a mildy medium kinda handy guy, with some hardware skills. So anyone know if this is hard, is there a guide around that can show me the process, or should I just pay the 400 dlrs and get this thing done.
Ive taken the back cover off my 5920 many times and really never took a look at it until now. What i noticed is that the vents for the ram are covered by a glossy black see through tape rather than mesh, which covers all the other vents.
Ive linked a picture below: add http into brackets
Has anyone else noticed that in their laptop? or is mine the only one where they ran out of mesh and decided tape was just as good. I wanna just rip it off.
Another thing, has anyone been able to overclock their 5920?(mines got a T8100) ive been searching for days and cant find anyone who has. I always have my backcover off and have my laptop resting on a custom dual 120mm fan notebook cooler. My idle temps are from 37-42, load is just over 60. I wanna push this thing just a bit more.
my fan is making a buzzing noise it's really enoying when i record stuff in the mic you can here it very well
View 8 Replies View RelatedMy 5920g start it wont even get to the postscreen happened right after the hdd got messed up.So i changed i figured that it was just the hdd that kept it from starting but nothing happened.So i asked and some told me it could be anything im really hopping its that its just the gcard since its the 8600m gt.One person told me to put a cd in the drive and if its spins it its probably the card and not the motherboard or cpu but idk.So best case if its the 8600m gt, could i upgrade it to the 9600m gt or the 9650m gt since they also are mxm2.
I think the bios support the 9600m gt but im not sure about the 9650m gt.
I really wana finish my fallout 3 game i was almost at the end.
so one of my hdds died on me so I decided to use the one that I was using as an external hdd.
I reformated that HDD, took out the broken HDD and replaced it with the new one.
I popped in the Recovery disc and everything started and was going smoothly until it hit 18% and it gives me this "Restore Failed - reason 0xd000001e"
I know it's possible to upgrade the hard drive in my Acer 5920G, but I've got no idea what type of hard drive to look for, and which will be compatible etc.
View 10 Replies View RelatedSystem:
CPU: Intel t7500 2.2 Ghz
RAM: 2GB 667Mhz
HD: 1 HD 5400 RPM 250 GB
GPU: Nvidia 8600M gt 512 MB ddr2
I got these temperatures by running orthos to stress the cpu, and furmark to stress the gpu at the same time. Are these temperatures normal for an Acer Aspire 5920g? Cause I find these temperatures rather high, and I'm wondering if these are safe. I already have applied some artic silver 5 thermal compound to the both the gpu and the cpu.
I am a "silver surfer" who is starting to enjoy "playing" and "tweaking" my Acer Aspire 5920G on pre-installed Vista SP1 as a little hobby to pass the time
So far I have confined myself to dabbling with software and Vista itself but am now thinking about becoming more adventurous and upgrading the RAM from present 2GB to 4GB.
Firstly, is this a worthwhile upgrade bearing in mind I do not run any particularly intensive applications? In other words will I notice a performance difference in,for instance, boot times etc ?
Secondly, a few months ago I think I saw an article or thread in this Forum explaining how to increase the RAM in a 5920G and containing a couple of very useful diagrams.