I have a problem with the bios upgrade on my Aspire 5920G.
I have downloaded from Acer's site the 3813 version and i try to use it with winphlash, the program that is in the folder when i unzip.
I have always an error message, the one in the printscreen.
Yes, i have opened the program with administrator privileges, the same message pops out.
I think that the problem is that i have Windows 7 Ultimate x64.
I have an Acer Aspire 5920G running Vista Home Premium that it came with preinstalled.
Now I'm itching to make the switch to Windows 7, but apparently the 5920G isn't on Acer's list of compatible computers, which has me a bit apprehensive... However, I've run the upgrade advisor and it gave me just a few minor concerns, which leads me to my question:
If I upgrade to Windows 7, will my recovery partition still be intact, enabling me to revert back to the factory defaults with Windows Vista if need be?
I have installed bios version 1.24 from previous 1.1 for Vista without backup of original bios.
What bios should i choose from Acer Upgrade kit to revert to Vista bios?
i have bios 1.27 and want to install the latest but am a bit worried about bricking the thing, my fan never seems to be off anymore and the indle temp is between 46 & 51 degrees is this normal for this model. Can i use a memory stick to flash the bios from dos ? cos a dont want to use windows killed my old hp laptop flashing in windows. Anyone have a safe cant fail method of upgrading this bios.
View 4 Replies View Relatedthe 8600M GT is getting a bit dated now and I'd like to upgrade it to something friendlier if possible. where would I look for an MXM II GPU that would work with the current cooling solution that the 5920G has? I know the same thermal specs are necessary cause it can't do better...and with just the 8600M GT, playing COD4 multiplayer gets it so hot I have to stop cause the keyboard is too hot to touch!
I've got 2x2GB SODIMM"s to drop in to it...easy access to a the new Penryn series CPU's...just want a better GPU. something NOT DDR2.
I recentely purchased a 9500M GS for my Acer 5920G to upgrade from my 8600M GS. Now I have read the sticky regarding what cards can go in the 5920G and the 9500M GS is listed as one of them. The problem I am having though is that when I plug the card in and boot my machine, I get no display.
Now, this is what I have tried. I have tried to get a backup of the BIOS on the 9500M GS so i can use Nibitor to identify what it is. I followed the VGA flashing guide to where it says about restoring the BIOS blind but my laptop doesnt seem to boot at all i.e. setting the first drive to USB Key does nothing as the light doesn't blink.
I have tried putting my system BIOS back from the latest version (3813) to previous ones (3811, 3805) and even the default one my laptop came with (3708). Again this was to no avail. My 9500M GS still wont boot.
So this leaves me to this conclusion. The cards BIOS must be from a different vendor, and I imagine it would be ASUS. Is there any possible way I could get this card working in my system.
Is this (Acer 5920g) upgradeable to 9600M GT? AFAIK, i can't find any success case over from the internet.
View 7 Replies View Relatedi'm a 3D artist and i have a pretty good workstation for doing all my projects, however, lately i've been meeting with clients at their offices and need to bring whats now MY notebook (it used to belong to my wife, hehehehe) but i definitely need to upgrade it to do on-location updates to my 3D scenes and shaders..
I know that this notebook is x64 so i need to upgrade my 32-bit vista. Wich is the fastest GPU that this machine will support? (Current: Core2 Duo CPU T5550 @ 1.83GHz)Can it support MXM II Graphics Card Nvidia Quadro FX 770M 512MB DDR3 or wich is the fastest gforce? (Current: nV. 8600m GS 256mb)Whats the max and fastest ram that it supports on x64? (Current: 3GB Sync DDR2 667mhz)Fastest hardrive supported! (Current: WD 5400rpm 320gb)
My 5920g (NO problems for TWO years!) deserves an upgraded hd.
What would you recommend? I currently have the WD 5400 RPM 160GB. 500GB is what I'd like.
Should I stick with WD? I'll sound like a noob saying this, but SATA2 ain't a problem for me?
My laptop is a 1.5ghz C2D, 8600M GT DDR2 256mb (ARGH no ddr3), 160gb 5400RPM 8mb cache, with 2gb DDR2 667mhz...
yesterday, I got a 2GB Stick, (meaning I will have 3GB under Windows Vista 32-bit), and a 7200RPM 16mb cache harddrive (320gb fujitsu) to be exact.
I saw the processor upgrades, and I kept hearing it's fine for gaming unless I'm going to do heavy video editing, photoshopping do it, but do memory upgrade first, and I kept hearing HDD upgrade helps with everyday flow of operation (faster overall, meaning load up, booting, etc).
Will I see a decent performance/noticeable amount?
So now, it's 1.5GHZ C2D (T5250), 8600M GT DDR2 256MB, 320GB 7200RPM 16MB CACHE, HD-DVD/DVD-/+RW, 3GB DDR2 667MZ.
My next on the lsit is upgrade CPU to T7300, and if I can, upgrade the graphics card.
Maybe Bluetooth add-on since my phone can support syncing with that junk.
So yea, T7300, and maybe Radeon 3650 ddr3 or 8600 ddr3
I am kind of frustrated with the DDR2 Performance that this machine pulls.
I might upgrade my Laptop to 3GB DDR2 RAM, and a different MXM Graphics card. (Type II)
Where can I get an MXM II card that will work on my laptop? I heard you need to flash, but I hear some models you don't and I have to take in the thermal into account.
I am looking to play Call of Duty 4, and so on.
is the X1900 compatible? I would rather get 8600M GT DDR3, but that might be too expensive.
how to flash my acer 5920g's bios? I've downloaded the bios files from acer.com, but after i unzipped all the files i duno what to do next.
View 7 Replies View RelatedDoes anyone know if there is a motherboard bios update for the 5920G? Is there anything for the 8600M? Any info would be a great help. Mine is a US model, purchased at Best Buy. Has the T5250 @ 1.5. Is there a way to upgrade the wifi from a/b/g to one with n?
View 6 Replies View RelatedI want to flash the newest bios to my 5920G, but I don't know how to: the zipped folder has two different .exe files and one .sys, and I don't know which to double click to initiate the process...
View 5 Replies View RelatedI already upped the RAM to 3GB but it doens't seem to do all THAT much.
The computer feels rather sluggish under Vista. I've taken down A LOT of software, services etc... but to no avail. That and it's pretty established that Vista's just not great.
I have the version with the 8600GT GPU, stock 2GB RAM (now 3) and the T7300 Core2Duo CPU.
I'm looking to get rid of the some of the lag, get a smoother system... I may need more power and therefore to upgrade the CPU but that may be expensive... :/?
Just found this and was wondering if it can be used in a regular minipcie slot. With every connector of course.
Or something like letting the X-FI chip doing all the work , processing etc. and lead the output through existing onboard audio.
[url]
There is a REAL X-Fi chip on board not those lower end ones used in usb and pcmcia solutions.
I recently purchased an Acer Aspire 5920G and am delighted with my purchase.
The laptop is presently working well (touch wood !) but in case of future computer catastrophe I used the eRecovery facility to create a full back up and also create recovery DVDs.
Being a "belt and braces" person I have also bought, downloaded and installed a copy of Acronis True Image Home 11 which I saw recommended in a computer magazine.
As part of the Acronis process, I created a rescue dvd using its standard tool.
I am now required to check that this rescue DVD boots correctly.
This involves entering the 5920G's BIOS and temporarily amending the boot order.
I understand I can do this by tapping the F2 key repeatedly before Windows starts. Is this correct?
Is there any kind of password required to enter and/or amend the BIOS ?
Are there any risks in this process, what are they and how can they be avoided/minimised ?
I recently bought an Aspire 5920G with geforce8600M GT 512MB and windows vista premium.
My graphics card takes more than 700 MB from the RAM memory.
I would like to know if there's a way to make it take less or even disable this option?
I just acquired an Acer Aspire 5920G with NVidia GeForce 8600M GS.
I opened the back cover to see what it looks like and it looks like the graphics card is replaceable. It’s an MXM-II card in 73 mm x 78 mm dimensions.
I’m planning to replace the graphics card and I have couple questions.
Does the motherboard or the system support Nvidia Geforce 9600M GT 512MB GDDR3 MXM – II or Nvidia Quadro FX3600 512 MB MXM II?
How do you upgrade the CPU? I unbolted all the bolts on the heat sink but the frame is in the way and I can’t slide the heat sink assembly out as simple as I thought it would be. Does the mainboard support X9000 extreme CPU?
Is there a link to a manual where it shows how to break apart the laptop? I might change the screen, etc.
Is it worth putting the 5920G on steroids with X9000 cpu and Nvidia Geforce 9600M GT 512MB GDDR3 or Nvidia Quadro FX3600?
So after packing up my comp at a friends house my comp is kinda dead, it was alive before I left my home and everything was fine then.
When i try to start it the cpu is flickering for a bit then freezes so i dont se any bios or anything.
The blue tooth and the lights to the right of the key board are lit to and I have no idea what to do.
Ive tried my old ram mem sticks, pulling out the battery and trying without it, trying a new hard drive, checking for loose cables inside the comp, checking for dust and screaming at it but nothing works.
I talked to some friends and they suggested something called flashing the bios but I have no idea how to do it and I dont know if it will work since i cant se the bios start up screen before it freezes.
I have called acer but they basicly told me to send it in but i dont know if i have any varenty left on it so I rather try to get it working on my own before sending it in if I still got varenty on it.
i played nfs and my laptop overheated and turned off fan was very loud. is there a way that i could buy a new fan or new graphic card i have Gfroce 8600gt 512 is there any graphic card beter one that doesent heat up so much?
View 10 Replies View RelatedI believe that my Acer Aspire 5920G was getting too hot, so I checked the temps:
CPU: 81C
GPU: 73C
HDD: 55C
I'm afraid those temperatures are too high. I don't understand why this happens! I don't play games that much now, I have cleaned the laptop's fans recently and I have the air-conditioner on all the day to keep the room with the laptop cool.
What can I do to decrease temps? I don't want to spend money, because I'm having problems with that laptop and my 8600M GS might die soon...
I don't think the issue is physical as under Audio Properties => recording I get response from the 'VU' meter there. However, I am simply not being heard across skype or BF2/OFP VOIP. It's not the levels, which are set to maximum, I've installed the latest realtek HD drivers, and skype is set to 'windows default device'
Windows sound recorder works, although not very well.
i installed windows 7 on my 5920g, however, i don't know what to do with empowering technology. Although launch manager is suggested by acer to be installed the other applications are not listed as compatible with windows 7..
I did download them though, and installed them, but at enet communication manager i got a message about known compatibility issues...So i wonder, if there is a compatible version, or if i can use a version of another laptop that originally came with win7 and if so ,which one..?
If I close or open the Display part of the screen and or all of the screen turn's black and or blue shortly, it flickers more or less. On some positions I don't get any flickering at all, but if I just slowly open it and adjust the viewing angle it tend to apear and disapear.
Also I can reproduce it if I slowly and very gently touch the top edges of the lid and slightly push on one side and pull on the other. Not much, just a bit. Also if I put a little pressure on the left bottom side of the screen it tend to get this flickering.
Black & Blue are not the only problem, sometimes the screen turns black all of the sudden and white stripes apear on the right side / partly left side and it looks like the display is burning in, it slowly gets white and the effect moves slowly to the middle of the display. Also an indicator for that problem is that part of the pixels on screen get blue and or flicker blue. Then bigger parts bet blue and so one.
The usual open / close / adjust viewing angle works to make this disapear for a while.
Also 3D extensive games and HD movies seem to cause this problem.
My Acer Aspire 5920G appears to have 'died' and I thought I'd try here before contacting Acer. Despite being under warranty, Acer have found loopholes to charge exorbitant fees every time something goes wrong.
the 2.5 year-old laptop was working perfectly last night. This morning, I opened it and:
T: Pressed power button
T+2secs: DVD drive clicks on, hard drive spins up, everything seems normal
T+5secs: NumLock light flashes, but visible POST/BIOS *does not appear*. The screen never shows anything.
T+8secs: Hard drive is still on but ceases activity. Operating system is not loaded.
(I took the timings at a subsequent attempt, but every attempt follows the same pattern)
I've tried:
- running from battery, AC and both
- reseating the memory modules
- replacing and removing the hard drive
- booting with a boot disk in the DVD drive
- booting with an external monitor attached
to no avail. From this end, I'm not sure what else I could try. Clearly there's no 'good' time for a laptop failure, but this is a pretty terrible time, so I was hoping to avoid Acer spending 6 weeks deciding how many hundreds to charge me.
Very often, when my 5920G boots, it changes from the native 1280x800 resolution to 1024x768. Because of that, the icons mess up and I have to change the resolution and then put the icons back at their place.
There is roughly 75% chance this will happen when my laptop boots.
Adding this with my other problems makes using this 5920G a frustrating experience!
This started happening months ago, when I reformated the laptop the problem had gone, and now it reappeared.
typing with screen keyboard.
My keyboard is partially not working, launch manager didn't work correct b4 but now some letter keys & even shift keys r not working.
Saying that, my battery came out of laptop (lock was unlocked) when it was shut down, anything to do with that maybe?
I have ordered this laptop recently (Spec is below), well, it's due to arrive tomorrow, and am probably going to upgrade to Vista x64, or at least give the new Windows 7 x64 a go on it. However, I'm just unsure as to whether it will be easy enough to migrate or whether I'm likely to have issues finding drivers for the relevant hardware. I hope someone here can give me some advice as attempting to scour the internet for a response for this particular model has been a nightmare, I've found the drivers page but it's all a bit confusing with seperate 64bit and then SP1 sections! ...
View 6 Replies View RelatedI have recently become aware that my 5920G has an upgradeable graphics card. Mine is currently an Nvidia GeForce 8600M GS 256MB. What cards can I upgrade to?
View 6 Replies View Related
